Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹38.3 L+₹76,599.88 (2.04%)Rejected-AOC NO 26 SRI GANESH 7TH CROSS BDS NAGAR DIBBUR RAMAIAH LAYOUT K NARAYANPURA MAIN ROAD BANGALORE 560 077 | BENGALURU URBAN | KARNATAKA | 560077 | L2 | Rejected-AOC NOT BEING L1 | |
| 3 | L3₹39.0 L+₹1.5 L (3.93%)Rejected-AOC | L3 | Rejected-AOC NOT BEING L1 | |
| 4 | L4₹40.1 L+₹2.5 L (6.71%)Rejected-AOC 227 2 5TH B MAIN ROAD 2ND BLOCK HRBR LAYOUT KALYAN NAGAR BANASAWADI BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L4 | Rejected-AOC NOT BEING L1 |
Tender Value
Refer Docs
EMD Value
₹81,000
Closing Date
4 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE - 560006
ADDN/ALTN AND IMPROVEMENT TO BLDG NO P-280 AND PROVN OF CERTAIN SANCTIONED MINOR WORKS AT HQTC (U) BANGALORE
2024_MES_644115_1
8193/GE/79
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BANGALORE
AS PER NIIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹81,000
16 May 2024
26 Feb 2024
8 Apr 2024
26 Feb 2024
4 Apr 2024
15 Mar 2024
27 Feb 2024 - 4 Mar 2024
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil
M&L for PCC type D2 ,1:4:8 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils in soft/loose soil
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of form work to sides of pillers, posts, struts,piers, columns and stanchions for rough finished flat surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.
Use and waste of form work to side and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels beam,tie beam, cantilevers, shelves including supports, overhangs, etc. also splays between floors and rough finished, complete all as specified and directed.
M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto,as item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in Beams, cantilevers, bressummers,tie beam,lintels over 1.5m spancomplete all as specified and directed.
M&L for RCC (nominal mix) type A1 1:1.5:3 (using 20mm graded stone aggregate) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles.
M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6 , complete all as specified.
M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1: 6 , complete in walls all as specified.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and direction by Engr in Charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and as direction by Engr in Charge (WPC shall be measured & paid separately). .
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6, finished even and smooth with out using extra cement. all as specified and direction by Engr in Charge.
M&L fo Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement all as specified and direction by Engr in Charge.
M&L for preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion on ceiling through all as specified and directed by Engr in Charge.
M&L for preparation of new surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of exterior emulsion paint (weather coat) on walls all as specified and directed by Engr in Charge.
M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface all as specified.
M&L for preparation of old surface after complete removal of existing treatment and apply 2 coats of distemper oil emulsion white or tinted through over and including a coat of 1mm thick wall care putty all as specified and directed by Engr in Charge.
S & F mild steel tubular trussed, purlins, fencing posts,crane gantries rails and fastenings including special shaped washer etc complete using ERW or induction butt welded tubes Conforming to IS 1161-1979 grade St -240 including distance pieces, cleats , nut & bolt any size & length etc.
M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts as reqd and specified and directed.
M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface.
M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, all as specified and directed.
M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. incl dismantling of old tiles incl 15 mm thick Screed bed or bedding layer of cement mortar (1:6) all as specified and directed
Supply only liquid water proofing compound of approved quality. (Make : CICCO NO.1/SIKA/ACCO PROOF).
M & L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Note:- All debris & rubbish shall be removed from MoD land at the end of each working period at his risk and cost in accordance with all applicable federal state, local regulation. After removing debris the ground should be levelled/cleaned all as directed by Engr-in-charge.
M & L for Coloured Glazed ceramic design tiles 450X 300X 7mm / 600x300x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) all as specified and directed by Engr-in-charge
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 all as specified and directed by Engr-in-charge
All as per above but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 all as specified.and directed by Engr-in-charge
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons incl granite slab in kitchen platform Laid, bedded and pointed in any mortar etc all as specified and as directed.
M&L for 20mm thick Granite of any type work (table rubbed and polished) in cooking plateform, widow sill, step, wall lining and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 15mm thick mortar in CM 1:6.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor orthe side of waist slab with suitable arrangement
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
S&F false ceiling at any height 600mm x 600mm x 15mm Armstrong/ Everest mineral fiber tegular ceiling tiles of type classic lite RH- 99 laid on Armstrong/ Everest prelude XL exposed grid system with 9 mm wide T section flanges color white. The framework comprises of main runner spaced at 1200 mm centre. Hanger (GI wire) to be fixed by approved roof plug and screws etc. The last hanger at the end of each main runner should not be greater than 450 from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stitching) to be interlocked between main runner at 600mm center from 1200x600mm modules. Cut cross tees longer than 600mm to be supported independently 600mm x 600mm modules to be formed by fitting 600 mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong/ Everest wall angle secured to walls at 450 mm maximum centers.
S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe and fixed all as specified.
S&F in repairs angle cock 15mm bore, fancy type chromium plated fixed all as specified.
S&F in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins white or tinted, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each
Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each
S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
S&F 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 125mm long Butt hinges, medium weight, cold rolled mild steel,
S&F for 200mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F 150mm Aluminium handles, cast type anodised.
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.
S&F Powder coating (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as direction by Engr in Charge.
S&F Powder coating (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as direction by Engr in Charge.( Note : sheet Glass and SS wiremesh shall be measured & paid separately). .
S&F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads all as specified and directed
S & F in 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
S & F in 4 mm thick Figured glass, pin head type and glazing with oil putty in squares pane n.exc 0.50 sqm in each pane.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site including 3 nos 100mm long Stainless steel butt hings and screws as per specification & drawing.
S&F in repairs Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S & F 100mm mild steel butt hinges, medium weight, cold rolled
S & F 200 mm alluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed.
S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised.
S&F in repairs door closer aluminium extruded section body hydraulically regulated, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
S&F in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified.
S&F in repairs 25mm dia mild steel powder coated, fancy type curtain rod complete all as specified.
S & F in 18/19mm thick veneered decorative plywood, grade 1( with BWR resin), with decorative faqce veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves,almirahs etc all as specified and as directed by Engineer in Charge.
S&F in ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified
S & F in stainless steel self closing auto hinges for wooden cabinet shutter complete all as directed
S & F in stainless steel telescopic channel ball bearing drawer channel 500 MM with loading capacity: 45Kgs complete all as directed
S & F in mortice latch with two levers (vertical type), brass body and length of the latch is 65 mm complete all as directed
S&F in repairs UPVC 20 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge.
S&F in repairs UPVC 25 mm dia pipe pressure rating 10 Kgf/cm2 with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge.
Dismantling water tanks, capacity in litres exc 500 & n exc 1000 and removing to store.
S&F rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F ball valves 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms)
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil
S&F 12mm thick polycarbonate acrylic sheet transparent sheet with 100% tranparency incl all fittings fixed with self tapping screws/J hooks and bolts as reqd and specified and directed by Engr-in-charge
Supply and fixing aluminium composite panel of approved plain colour or wood grain printed on interior walls, columns, MS structure, ceiling, coping, slab projectons at all heights and elevation over aluminium framework. The aluminium composite panel should 4 mm thick consist of 3mm thick thermoplastic core of anti toxidant LDPE sandwitched between 2 skins of 0.5mm thick aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finshed with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer paint complete all as directed.
Supply and fixing wood plastic composite (WPC) of 12mm thickness complete all as directed by Engr-in -charge Note : Colour and design will be as dirtected by Engr-in-charge .Rate quoted tobe inclusive of design and fittings
M & L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 height all as specified and direction by Engr in Charge.
M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming.
M & L for 2nd class hardwood plain fillets. Square, rectangular or triangular exc 03 not exc 06 sq.cm in sectionclean sawn, secured with nails or brads all as specified and direction by Engr in Charge.
S & F fof Welded steel wire fabric Weight per square metre not exc 4kg per sqm complete to wood or steel members →
M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, not exc 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer.
M & L for Plain cement concrete type C1, (1:3:6) (using 20 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates and the like including use and waste of form work, weathering, slightly rounded or chamfered angles and throating as required.
Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil
Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles.
M & L for Coloured Glazed ceramic design tiles 350x 250x 7mm/ 450X 350X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4)
M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 15 mm thick screed bed of cement mortar (1:6).all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed.
M & L for Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.
M & L for Preparing new plastered surfaces and applying Two coats of oil bound distemper over a coat of alkali resistant primer on surfaces of walls.
M&L for concealed point wiring with PVC insulated,multistranded copper conductor cable FRLS of size1.5 sqmm 1100 volts grade in and including heavy grade PVC Conduit Pipe ISI marked broken white or of cream colour with all accessories and fixing arrangements on Stone walls / brick masonary walls /ceilings /floors etc. including fixing top cover /PVC / MS Modular type junction boxes fixing on Stone walls / brick masonary walls surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following.
One light point controlled by one 6 Amps one way modular switch.
Supply and fix Modular switch , 1 Module single pole one way 6 Amps.
Supply and fixing of modular white cover plate with frame, 6 module.
Supply and fixing of metal flush box 6 module.
Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
S&F 20 watt LED pendent light fitting with hanging arrangement including lamp complete all as specified & directed by Engineer-in-Charge. Make Bajaj Cat Part No- BSDCSLB 20 W or equivalent in Philips / Wipro.
S&F sheet metal enclosure for DB's when MCBs to be used single pole and neutral 2 way 240 volt.
S&F MCB SPN, 40 Amps, 240/415 V, B- series with breaking capacity of 10KA complete all as specified & directed by Engineer-in-Charge.
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade with stove enamelled steel conduit ISI marked as approved with all accessories and fixing arrangements on wall/ceiling on wall including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly for modular switch sockets etc complete all as specified and directed. (the modular boxes and frame will be measured and paid separatly under relevent items)
One light point controlled by one single pole 5 Amps switch
All as per item No 110 here in before but for PVC insulated FRLS copper conductor of size 2.5 sqmm for switch socket multipurpose 15 Amps including provision of 1.5 Sq mm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board
Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
Supply and fixing modular socket, 6 A/16 Amps 2/3 pin combined two module, 230 volts all as specified
Supply and fixing modular swich one way 16 Amps one module, 230 volts all as specified
Supply and fixing modular white cover suitable with frame 3 module.
Supply and fixing of DB, SPN 2 ways, Double door type complete all as specified and as directed
Supply & fix of MCB SPN 6 to 32 Amps 240 volts 10 KA rupturing capacity complete all as directed
Supply and fixing of LED light fitting 9 / 10 Watts bulkhead Lumianiares including LED light driver holder connecting up with 2 core flexible copper conductor cable of suitable size from Ceiling rose.
Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.
Material and labour for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover ,punning of sand using suitable T&P as per site requirement complete all as specified and directed by Engineer-in-Charge. Note- Punned thickness of sand 18 cm to be consider for measurement purpose.
Supplying and laying un-reinforced precast concrets cable cover class LV, Type 1, flat, size 250x150x40 mm complete all as specified and directed by Engineer-in-Charge.
Material & Labour for plain cement concrete 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in foundation,filling and mass concrete in foundation of poles with necessary plastering work complete all as specified and directed by Engineer-in-Charge.
Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated,screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 sqmm 4 core complete all as specified and directed and directed by Engineer-in-Charge.
Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc,fixing with garden light including clamps, nut bolt and washers complete all as specified & directed by Engineer-in-Charge.
Supply & Fixing with pole or in PCC for garden light fitting PVC cable loop box, size not less than 200 mm x 140 mm x 95 mm, out door type, IP 65 including 4 Nos aluminum bus bar of size 25mmx5mm mounted on porcelain insulators with one MCB SP 6 amps 230 volts connected with phase wire to any type light fitting and using FI clampsof size 20mm x3 mm for fixing of PVC cable loop box with pole,including nuts,bolts & washers and connecting the any core cables to bus bars with using suitable size GI nut, bolts and washers and aluminum lugs etc complete all as specified & directed by Engineer-in-Charge.
S&F single core PVC insulated FR cable with multistranded copper conductor of size 1.5 sqmm cross sectional area, 1100 Volts grade, complete all as specified and directed by Engineer-in-Charge.
S&F LED post-top garden light fitting 20 watts with IP 65/66 protection, heritage type fixing on PCC block of size 60X30X30 cm and 30 cm above and 30 cm below the ground with plaster including cable lugs, nut,bolt and washer or as per site requirement complete all as specified & directed by Engineer-in-Charge. Make Crompton Cat part No LPTH-20-WW or equivalent make of Havells,Bajaj.
S&F LED post-top light fitting 40 watts made in spun aluminium powder coated housing with higher efficiency lighting and IP 65 protection, complete all as specified & directed by Engineer-in-Charge. Make Bajaj BGCTNP 40W LED WH/WW or equivalent make of Havells,CG.
M& L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified & directed by Engineer-in-Charge.
Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr in depth or part thereof in hard/dense soil and getting out for laying of underground cables and foundation for poles etc.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm
Material & Laying & testing in trenches / on ground / on wall, jointing and testing galvanised steel water tubing IS-1239 marked, medium grade, incl all necessary pipe fitting / acessories like sockets,unions, tees, elbows etc, of the under mentioned sizes:-
50 mm dia
40 mm dia
25 mm dia
20 mm dia
15 mm dia
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm dia bore complete all as speciffied and directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 40 mm dia bore complete all as speciffied and directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 50 mm dia bore complete all as speciffied and directed.
Supplying and laying of CPVC 75 mm dia pipes Schedule 40 pipes and plain schedule 80 fittings
Supplying and laying of CPVC pipes SDR 11 50mm & Plain CPVC SDR 11 fittings in trenches complete all as specified
Supplying and laying of CPVC pipes SDR 11 40mm & Plain CPVC SDR 11 fittings in trenches complete all as specified
Supplying and laying of CPVC pipes SDR 11 25mm & Plain CPVC SDR 11 fittings in trenches complete all as specified
Supplying and laying of CPVC Ball Valve 75 mm including all fittings and fixtures.
Supplying and laying of CPVC Ball Valve 40 mm including all fittings and fixtures.
Supplying and laying of CPVC Ball Valve 50 mm including all fittings and fixtures.
Supplying and laying of CPVC Ball Valve 25 mm including all fittings and fixtures.
Supply, install, testing and commissioning of Submersible open well pump set 65X50mm dia outlet electric driven of capacity 5 HP 3 phase, 415volt, 50HZ, AC supply, complete all as specified and directed. Make- Kirloskar
M&L FOR SS 304 LED Stand with its accssories
SS 304 LED 18 Watt underwater LED Light RGB
S&F LED Driver + LED Controller with Remote
M&L for boring of holes under road, pavement, hard standing by trenchless technology or by mechanical means including making good to existing disturbed surfaces matching with existing complete all as specified and directed by Engr-In-Charge.
M&L for plate earthing for substation equipments (Transformer, lighting arrestor and feeder pillar box) complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground vertically ( in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcaol dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts, & check nuts) and riveted to earth plate at one end and connected to metallic body of HT/LT equipments etc at the outer, earth strip encased in and incl 50 mm bore og GI grade pipe with all fitting from top of electrode to body of equipments fixed with and incl 25 x 6 mm flat iron clamps, bolts, nuts and washer and also providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No 5 of SSR Pt-I. The scope of work also include necessary excavation and earthwork.
S&F 4 core 2.5 Sqmm copper conductor in PVC Conduit including fixing and fixtures and all as directed by Engr-in-Charge
M&L Flat 3 core PVC insulated, submersible multistranded copper conductor cable of size 2.5sqmm including in PVC coduit andnecessary connections complete all as specified and directed.
Supply, install, testing and commissioning of Star Delta starter in sheet steel enclosure type for motor rating, 5 HP, 3 phase, 415volt, 50HZ, AC supply, complete all as specified and directed. Make- L&T, or equivalent
Supply and lay cable XLPE insulated screened PVC bedded, galavanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core
Cutting to existing steel tubing for alterations upto 50 mm GI tubing
Supplying and laying of CPVC pipes SDR 11 15 mm & Plain CPVC SDR 11 fittings in trenches complete all as specified
S&F Cast copper alloy Stop Valve, 25 mm size screwed down, high pressure, with butterfly handle screwed both end for iron pipe.
S&F Cast copper alloy Stop Valve, 20 mm size screwed down, high pressure, with butterfly handle screwed both end for iron pipe.
Supplying and laying of CPVC Ball Valve 15 mm including all fittings and fixtures.
S&F Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and driected by Engr-in-Charge.
Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm 125gms)
S&F Rotational moulded polye?thylene water storage tanks capacity of1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by engineer-in charge.
Removing excavated material exc 500m but not exc 1.5km & deposting where complete all as specified and directed by Engr-in-Charge
M&L for glass mosaic design tiles 20mmx20mmx4mm thick on vertical / horizontal surface set & fixed with paper face to ensure 100% adherence all as per manufacturers instructions and directed by Engr-in-Charge.
SRI GANESH ENTERPRISES
OM CONSTRUCTIONS
M/s BHOOMI ELECTRICALS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .