Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST L1 | |
| 2 | L2₹29.9 L+₹5,989 (0.20%)Rejected-Finance 15 BAGHE ISLAM NEAR NH BY PASS BRIDGE LAL NAGAR CHANAPORA SRINAGAR JAMMU KASHMIR 190015 | SRINAGAR | JAMMU AND KASHMIR | 190015 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹36.4 L+₹6.5 L (21.9%)Rejected-Finance INDEX NO B 33 NC R O KRALPORA DISTT BUDGAM SRINAGAR J K 190019 | SRINAGAR | BUDGAM | JAMMU AND KASHMIR | 190019 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
6xSPL REPAIR OF BR AND EM WORKS AT VARIOUS LOCATIONS UNDER GE 970 EWS
2022_MES_572222_1
GE 970 EWS-67/2022-23
Open Tender
Civil Works - Others
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹84,000
Yes
9 Mar 2023
30 Dec 2022
30 Jan 2023
30 Dec 2022
28 Jan 2023
14 Jan 2023
Amount
Dismantiling timber scantling 40 sqcm and over insection in any position for framed work complete all as specified and directed.
Material & labour for 2nd class hardwood (wrought) in scantling for timber frame and fixed complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and directed
25 mm thick PCC 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in floor surfaces, complete all as specified and directed.
Glazed ceramic tiles coloured pattern as required 300 x 200 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with after including 10mm thick backing coat in CM 1:3 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matche the existing, over with and including 15mm thick screed bed in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises compete all as specified and directed
Factory made machine pressed chequered cement concrete tiles 200mm x 200mm x 25mm thick as in floors set and jointed in neat cement slurry and pointed grey cement and no pigment over with and including 15mm thick screed bed in CM (1:6) complete all as specified & directed
Rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished fair and even complete all as specified and directed
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 3mm thick putty complete all as specified and directed.
Preparation of new plastered or unplastered surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply & fixing in repair anodised aluminium snap grid frame work for false ceiling complete all as specified and directed
Supply & fixing in repair Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed
Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
0.63 mm thick galvanized, corrugated mild steel sheeting with grade of zinc coating 275 with two corrugation side lap, fixed with 'L' or 'J' type or crancked hook bolts and washers in roofs, complete all as specified and directed
Plain, galvanised, 0.80 mm thick mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames). complete all as specified and directed.
S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.
Factory made 2nd class hard wood 35mm thick plain framed panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed
Solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, supplying and fixing in opening, edges will be painted to match with printed sheet complete all as specified and directed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed
Supply & fixing in repair 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed
Supply & fixing in repair galvanized mild steel wire cloth, 0.63 mm nominal dia or wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed
Butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed
200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed
Aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long dia 16 mm complete.ISI Marked, complete all as specified and directed.
Aluminium handle, cast type, anodized 100 mm size ISI Marked complete all as specified and directed
S & F in repair 15 mm bore CP bib taps cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
Taking up or down 15 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 16mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections and removing to store complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 20mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
Supply and fixing in repair for Soap dish, MS, CP of approximate size 160x160x90mm, complete all as specified and directed.
S & F in repair 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
Supply and fixing in repair rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity ISI Marked incl 15 mm dia ball valve high pressure of PVC with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed
Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore waste pipe, CP waste coupling complete all as specified and directed
Supply and fixing in repair 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle,wt n less than 450 gms screwed both ends for iron pipe of for unions complete all as specified and directed.
Supply and fixing in repair for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.
Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed
Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screwscomplete all as specified and directed
Supply and fixing in repair 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor, complete all as specified and directed.
All as per item no.48 above but 75mm bore pipe ---ditto---
Supply and fixing in repair PVC, SWR bends (any radius) of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR bends (any radius) of 75mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR cowls of 110mm dia complete all as specified and directed.
Supply and fixing in repair PVC, SWR floor trap outlet diameter 75mm, with grating including jointing to waste pipe complete all as specified and directed.
S & F in repair PVC connection commercial quality 450mm long with PTMT nuts of 15mm bore and fixed complete all as specified and directed
S & F in repair PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets complete all as specified and directed
Supply and fix vitreous china, wash down water closet pan, white, Pedestal pattern WC (excluding flushing cistern and flush pipe), including PVC seat cover fixed in repair complete all as specified and directed.
Taking down old and unserviceable submain wiring/ service cable any size of two core including earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface, all as directed by Engr-in-charge.
Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC conduit (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 59 here-in-before but socket out let 3 pin, 5 Amp on same board with other switch.
All as per description of srl item No 59 here-in-before but socket out let 3 pin, 5 Amp on independent board with other switch.
All as per description of srl item No 59 here in before but using 4 sqmm (nominal area) PVC stranded copper conductor cable with 4 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket out let 15 Amps on independent board.
All as per description of srl item No 59 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin switch socket out let 15 Amps on independent board.
Switch piano, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .
Socket outlet 3 pin, 5 Amp, 230 V AC complete all as specified and directed.
Switch socket combination 5 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed.
Modular Switch piano, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .
Modular Socket outlet 3 pin, 5 Amp, 230 V AC complete all as specified and directed.
Modular Switch socket combination 5 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed.
Ceiling rose 2/3 terminals of size 50mmx65mm surface type complete all as specified and directed
Modular white cover plate with frame, 3 module complete all as specified and directed
Modular white cover plate with frame, 8 module complete all as specified and directed
Supply and Fixing in repair 1X18 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 with all accessories and connecting up with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. make : BAJAJ /Philips/CG.
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type Each with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed
Supply and Fixing in repair Sheet metal enclosures for DB's with 200 Amp rated bus bar single door class IP-43 epoxy coated inside and outside 6 way tPN 415 volts complete all as specified and directed.
Supply and Fixing in repair Sheet metal enclosures for DB's with 200 Amp rated bus bar single door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed.
Supply and Fixing in repair MCB TPN 100 Amp, 415 volts, 10 KA, complete all as specified and directed.
Supply and Fixing in repair MCB SPN 63 Amp, 240 volts, 10 KA, complete all as specified and directed.
Supply and Fixing in repair MCB SP 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.
Sub main wiring with two runs of single core PVC insulated (FRLS-H) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS-H) unsheathed cableas earth wire continuity conductor complete all as specified and directed. Note : (i) Two run of cable 4 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
Sub main wiring with two runs of single core PVC insulated (FRLS-H) unsheathed copper conductor multistranded cable of size 6 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS-H) unsheathed cableas earth wire continuity conductor complete all as specified and directed. Note : (i) Two run of cable 6 sqmm and one run of 4 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour
M&L in repair for Earthing complete with galvanized steel plate electrode 60cm X60cm X6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron, protected by galvanized steel pipe 15 mm bore (light grade) upto 57.5m & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 20mm thick RCC(1:2:4) type B-1 cover & frame etc) including GI protecton pipe for earth lead complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed.
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 16 sqmm 2 Core laid in pipes or fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 10 sqmm 2 Core laid in pipes or fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 10 sqmm 4 Core laid in pipes or fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed
Supply and fixing in repair Galvanised iron tubes 40mm bore, light grade including all fittings fixed to wall, ceilings and or laid in floors/tenches/under road etc complete for cable protection complete all as specified and directed.
Supply and fixing in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipe of dia 20 mm complete all as specified and directed.
Lagging on pipes used in water supply or plumbing all around with 40 mm thick bonded mineral wool performed SNAP ON pipe section of density 144 Kg/cm confirming to IS: 9842 provide with and including chicken mesh wire netting 25 gauge, 20mm mesh and 0.01mm aluminium foil for 15 mm dia of GI pipe complete all as specified and directed.
Supply and fix water heater storage type with stainless steel inner tank, electrically operated, single phase, of capacity 25 litres with 5 star BEE rating, vertical mounted with stranded fittings such as thermostat, heating element, LED indicator, safety valve, non-return valve, fixing clamps, nut bolts washers, inlet/outlet PVC steel reinforcement hot/cold pipe complete all as specified and directed by Engr-in-Charge. Make - Usha/Bajaj/Havells
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removing surplus soil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.
Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 95 sqmm 3.5 Core laid in trenches or fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 70 sqmm 3.5 Core laid in trenches or fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 50 sqmm 3.5 Core laid in trenches or fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 35 sqmm 3.5 Core laid in trenches or fixed to poles/walls with suitable saddle & glands including taking down old over head conductor complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 25 sqmm 4 Core laid in trenches or fixed to poles/walls with suitable saddle & glands including taking down old over head conductor complete all as specified and directed
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 16 sqmm 4 Core laid in trenches or fixed to poles/walls with suitable saddle & glands including taking down old over head conductor complete all as specified and directed
Supply and Fixing in repair Street/Security light LED , 60 Watt energy savings and environmental friendly long life versatile pressure die cast aluminium fittings including necessary brackets and clamps complete connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make : Bajaj/Philips/Crompton/ Wipro
Supply and Fixing in repair Street/Security light LED , 90 Watt energy savings and environmental friendly long life versatile pressure die cast aluminium fittings including necessary brackets and clamps complete connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make : Bajaj/Philips/Crompton/ Wipro
S & F in repair of 120 Watt LED flood light of die cast aluminium body, IP-66 including all accessories as required complete all as specified and as directed.
Supply and fixing in repair of cable junction box of IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 333 x 233 x 120 mm incl necessary suitable size new backelite connecting terminals mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness and connecting the incoming & out going LT cable connections in the terminal block of junction box and fixing clamps made up of GI flat of size 25 x 6 mm of suitable length-02 Sets, incl GI nut and bolt and washers on poles complete all as directed .
Taking down of existing unserviceable street light fitting bracket and supply and fix new brackets made out of 40mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall with and including two sets of clamps made out of flat iron of size 50 x 6 mm with bolts, nuts and washers complete all as specified and directed.
Taking down of existing unserviceable clamps and supply and fixing new clamps made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.
M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia all as directed.
S&F in repair of 1.5 sqmm 3 core pvc insulated flexible copper conductor wire from street light terminal box to fittings of required length drawn through and including PVC conduit of suitable size or as indicated and directed.
Dismantling and taking down old unserviceable LT panel board from it's existing position after isolating electric supply and supply, install, tsting and commissioning of CPRI Approved LT panel board, outddoor, cubical, dust and vermin proof made out of 3.0 mm thick MS sheet with front and back door openable type fitted with nuts, bolts and washers fitted with knobs and hinges and air vents incl painting with two coats of enamelled paint over a coat of red oxide primer, suitable for 415 Volt, 50 Hz, 3 phase, 4 wire suitable for and incl the following :-
a). MCB SPN 32 Amps, 16 Ka - 01 (outgoing)
b). MCCB TP 63 Amps, 25 KA - 02 Nos (incoming & outgoing)
c ). MCB TP 32 Amps, 25 KA - 01 (outgoing)
f). LED indicator lamp -03 Nos
g). Aluminium bus bar chamber of capacity with bub bar 400 Amps TPN with bub-bar insulator etc in clour coding
h). Internal wiring with suitable size single core copper conductor cable of Red,Yellow, Blue and black colour including lugs, Ferrule, tag etc
Supply and install 1.5 TR star rated hi wall split units indoor/outdoor complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity including taking down of old AC units complete all as specified and directed. Make:- Daikin/Voltas/Bluestar
S&F in repair 5 KVA automatic voltage stablizer for low and high voltage connected equipped with electronic transistors relay suitable for connection of single phase, 50 Hz AC supply complete with voltmeter and designed for input voltage 170-220 Volts of capacity and output voltage stablized 230 Volts (+/-) 2.5% ) complete all as specified and directed. Make- V-guard/crompton greaves/Microtek
M/S Manzoor and Co
G N Constructions
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .