PROVISION OF SHED ALONG WITH CERTAIN PROTECTIVE WORKS AND PROVISION OF RELIGIOUS BUILDING AT CGRA KUNJATHBAIL MANGALORE

Amount

Excavating in trenches exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified & directed

M & L Exacvation over areas by mechanical means n. exc. 1.5m deep and getting out in in hard/dense soil complete all as specified & directed

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified.

M & L for returning filling in incl spreading levelling watering hard/dense soil in layers n.exc 25 cm complete all as specified & directed

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Removing excavated material (soil) to a distance exc 250 m and n.exc 500 m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified & directed

Excavation in post holes in soft/disintegrated rock each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in fdn /mass concrete complete all as specified

M & L Walling of random rubble, brought up to course, well bonded, bedded and solidly hearted, built in cement mortar 1:4 etc complete all as specified

M & L for flush pointing to random rubble masonry, in CM 1:3 uncoursed or brought upto courses complete all as specified

M & L for PVC Pipe 75mm bore as in weep holes laid in trenches and jointed complete all as specified & directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for dressed laterite stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified

M & L for Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (using 20mm graded aggregate) exc 10cm in width and setting in cement ortar 1:4 complete all as specified

M&L Rendering 15mm thick in CM 1:4 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified

M&L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of primer complete all as specified

M&L PCC 1:2:4 type B1 using 20mm graded aggregate including formwork for coping/haunching, weathering, slightly rounded or chamfered angles and throating, complete all as specified

S&F Steel work special shaped in tubular square/rectangular/round section trusses as in main and cross beam, rafter and purline including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified

S&F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified

S&F Fe 410W (Gde E-250) quality A mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to bottom of GI pipe complete all as specified and as directed conforming to Fe-410W complete all as specified

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified

M&L for Pre painted galvalume aluminium zinc coating GI based coorugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified

M&L for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding/ ridges/valley to wall fixed with self tapping screws complete all as specified

M&L for 60mm thick machine pressed precast concrete paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment etc complete all as specified.

M & L for 100mm thick cement concrete type D2 1:4:8 (40mm graged aggregate) as sub base etc complete all as specified

M & L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified

M & L for 150mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in hardstanding etc complete all as specified

Supplying and turfing of Mexican/Korean grasses in a carpet form with adequately developed roots all as specified and as per standard norms.

Preparation of the surface by removing leaves, existing roots, stone pebbles etc complete and supplying and spreading specially prepared sweet earth having mixture of good earth and sand (designation No.2) and standard manure free from colds, roots and other unserviceble items in the proportion 15:4:1 to an average thickness of 15 cm including antitermite @ 5 ltr solution in 1:19 ratio as per sqm to the filled soil complete all specified and directed.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

Supplying and laying of 25mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified including taking/down up of exisiting pipe complete all as specified & directed

Supplying and laying of CPVC 32mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including taking down/ up of exisiting pipe complete all as specified & directed.

Supply only brass sprinkles, heavy duty suitable for connecting to 25mm dia water connection, with and including MS standing arrangement for watering the area complete all as directed by Engineer -in-Charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in man hole cover slabs etc set in cement mortar (1:4) including use and waste of form work (reinforcement shall be measured and paid for relevant item) complete all as specified

M&L for TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified

M&L for TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified

M & L for preparation of newly plastered wall surfaces and applying two coats of exterior emulsion paint of required shade @ 1.67 ltr/10 sqm over a coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified

M & L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick backing coat in cement mortar (1:4) complete all as specified

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment etc complete all as specified

M&L 20 mm thick screed bed or bedding layer in CM 1:6 for floor finishes etc. complete all as specified

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two Nos. glazed & one No. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S & F aluminium snap grid size 605 x 605mm false ceiling frame work of angle 25x25x2mm. Main TEE 38x25x1.5mm and cross TEE 25x25x1.4mm and size of grid 605x605 mm complete all as specified

S & F PVC insulation panels10mm thickness with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

S&F hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.50mm dia, 40 mm long complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both 25 mm bore

S & F water storage tank ISI marked of capacity 1000 ltrs hoisted and fixed in position, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube etc complete all as specified

S&F in repair 25mm dia float valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified

S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repair Stop valves cast copper alloy 15 mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions complete all as specified

S&F PVC connection 15 mm size with PTMT nuts of lengths 450 mm, complete all as specified.

S&F and repair vitreous china wash basin, white ,flat back ,size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe complete all as specified

S &F in repair Brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified

S&F 100 mm bore PVC (SWR) pipe type 'A' with single socket fixed to wall, with MS brackets etc all as specified

S&F 110mm dia PVC band any radius complete all as specified

M&L for PCC 1:2:4 type B0( using 12.5 mm graded stone aggregate) as in stages for tank, roof kerbs covering over chajjas and similar locations rounded or chamferred on edges incl necessary formwork complete all as specified

S & F in repairs 32mm dia Harrison rails,stainless steel fancy type with fixing brackets, stops, rollers etc complete all as specified

Material & Labour for providing and fixing stainless steel (Grade 304) circular/ square 25mm and 50mm dia/section railing made of hollow tubes, plates, brackets etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

E & M PORTION: M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit pipe of suitable size including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed:-

(a) one light/fan point controlled by one, one way switch

(b) one switch socket outlet 5 A on same board with other switch.

(c) one switch socket outlet 5 A independent board.

All as per item No. 66 here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps on independent board.

M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including suitable size PVC rigid non metallic PVC conduit with all accessories complete all as specified and as directed. (NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length).

S&F Switch Modular 6A one way, 1 module complete all as specified

S&F Switch Modular 16A one way, 1 module complete all as specified

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified .

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified

Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.

S & F round shape 15 watt 220 volts, 3000 k, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.

S&F LED COB Spot Light 15 watt 3000K recessed mounted deep recessed adjustable/ fix downlight for good quality illumination to enhance the display complete all as specified and as directed.

S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix Wall mounted fan of sweep 400 mm AC single Phase. 230V, white colour complete all as specified and as directed. (Make : Havells model : Sameera FHWSUSTWHT16 or equivalent in other approved makes )

Supply and fixing LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with 200 Amps rated bus bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.

M&L for MCB SPN 40-60 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unserviceable MCB complete all as specified and as directed.

M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unserviceable MCB complete all as specified and as directed.

Supply, lay, testing and commissioning UG cable XLPE insulated 25 Sqmm 3 Core, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in trenches including suitable size of double grip cable gland and joiinting etc complete all as specified and as directed

Supply and lay riddled earth in trenches for cable protection, spreading, levelling, Punning and consolidating complete all as specified

Supply and lay old bricks sub class 'A' for cable protection laid trenches all as directed

Supply and lay GI pipe medium grade 40 mm dia as cable protection laid on trench/floor, fixed on pole/wall etc of following sizes all as specified

M&L for ceiling fan hook MS 2" for roof, ceiling square/ round/ L shape MS angle/ pipe for fan hanging, heavy duty complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cmX60cmX 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

LEKSHMI ENGINEERS (BID ID -3424157)

KOTIAN -ECC (BID ID -3425462)

Squad 7 Projects and Services Pvt Ltd (BID ID -3421645)