PROVN OF CHAIN LINK FENCING AROUND SUB STN NO 02 and 03 AND FOUR POLE STRUCTURES OF MAIN FEEDER LINE AT INS SHIVAJI LONAVLA

Amount

Surface excavation n.exc(not exceeding) 30 cmdeep and averaging 15cmdeep and getting out hard dense soil.

Removal excavated surplus soil to a distance n.exc. 50 m and depositing where directed at level n.exc. 1.5 m above the starting point all as directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out in hard dense soil

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil.

M&L for providing cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation, bed blocks,filling and mass concrete

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry

M&L Rendering 15mm thick in CM (1:4) on fair face of brick/concrete surfaces finished even and smooth without using extra cement complete

Reinforced concrete pipes, 600mm dia bore class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in benching/haunching of drain pipes and surface channels of drain.

Removing excavated soil n.exe 50 mtr distance and depositing at level not exc 1.5 mtr above the starting point.

M&L 3 coat of white wash on newly plastered surfaces including preparation all as specified and as directed.

S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

Supply only Chain link fencing, MS galvanised of any size and type complete all as specified and as directed by Engr in Charge.

Fixing only chain link fencing including line wires, any mesh, size, any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed Note : chain link fencing shall be measured and paid separately as " supply only"

Preparing new or previously untreated steel surface of any description, over 10 cm in width or girth not other wise described and appying two coats of synthetic enamel paint over red oxide primer.

S&F fixed 5 to 10 mm dia Mild steel screws bolts(Machine made)with hexagonal or square heads at one end and screwed both ends ,each screwed end to be fitted with washers and one hexagonal or squre nut, lentg of bolt exc 5cm and n.exc 10cm long. With washers.

M & L for hardcore of gauge n exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in hard dense soil

M&L for providing and fixing Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor/ground or the side of waist slab with suitable arrangement all as per drawing and approved by Engr-in-Charge.

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed by Engr in Charge.

S&F Plates (plain or chequered) channels for warning sign square cut or notched (ordinary and counter sunk) forming holes, without any attachment of FE 410-W (Gde-E-250) quality B includign painting of warning sign with reflective paint/stickering all as specified and as directed.

M&L for pre cast Machine pressed cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE

DWARKESH STRUCT-CON

JADHAV CONSTRUCTION AND INFRASTRUCTURE

M/s S.D Construction Co