REPAIR/REPLACEMENT OF OLD U/S BATH/SANITARY FITTINGS, WATER SUPPLY LINES, RCC SHELF, PVC DOOR AND VENTILATORS, DADO/FLOOR, SUNKEN FLOOR TREATMENT IN KITCHEN, BATH AND TOILET IN CERTAIN SMQ AT SECTOR 31, 47 AND 28 AT 3BRD UNDER GE (AF) MC CHANDIGARH

Amount

M&L for rendering 15 mm thick on other than fair face of brick surfaces or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement including taking down old plaster, complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick surfaces or concrete surface in cement mortar (1:4), with mixing of water proofing compound, finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed. NOTE: Water Proofing Compound shall be measured and paid separately.

S&F Gl wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting and waste, complete all as Specified and directed.

M&L for Rendering 10 mm thick in cement mortar (1:4) on ceiling, parapet, chajjas, facias of building and finished the surface even and smooth without using extra cement including taking down old plaster, complete all as specified and directed.

M&L for keyed pointing to brick walls in cement mortar 1:3, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer on walls complete all as specified and directed.

M&L for preparation of new plastered / un-plastered wall surfaces and applying two coats of apex paint paint over a cement primer complete all as specified and directed.

M&L for preparation of new plastered / un-plastered chajjas surfaces and applying two coats of apex paint paint over a cement primer complete all as specified and directed.

M&L for preparation of old plastered wall surfaces and applying one coat of oil bound distemper complete all as specified and directed.

S&F in repair PVC (SWR) pipes, 110mm bore, Single socketed, in any length with rubber ring joints fixed to wall including MS clamp of required size, complete all as specified and directed.

S&F in repair for 110mm bore, PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair for 110mm bore, PVC (SWR) bends any radius complete all as specified and directed.

M&L for fixing in repair, cast iron floor trap/nahani trap, 75mm with grating including lead joint and jointing material, jointing to waste pipe and set in cement concrete (1:2:4) type B1 and necessary tiling work to match existing floor not exceeding .09 Sqm each complete all as specified and directed.

S&F in repair 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floor including jointed with cement mortar (1:3) complete all as specified and directed.

S&F in repair 75 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floor including jointed with cement mortar (1:3) complete all as specified and directed.

S&F in repair 100 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall including jointed with cement mortar (1:3) and including MS clamp 50x5mm @ 2metre centre to centre, complete all as specified and directed.

S&F in repair 75 mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall including jointed with cement mortar (1:3) and including MS clamp 50x5mm @ 2metre centre to centre, complete all as specified and directed.

S&F in repair, 100 mm bore tee bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in repair, 75 mm bore tee bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

Taking up or down 15 mm bore steel/ kitek tubing with connections or fittings from wall, ceiling, floor etc. complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, and making good, cutting exc 10cm but not exc 20 cm girth to brick walls, complete all as specified and directed.

S & F tubes, 15mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only steel water tubing of 15 mm bore, with and including all fittings at new or old position, laid in floor along wall or at ceiling including cleaning, threading of steel water tubing complete all as specified and directed.

Taking up or down 20 mm bore steel/ kitek tubing with connections or fittings from wall, ceiling, floor etc. complete all as specified and directed.

S & F tubes, 20 mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only steel water tubing of 20 mm bore, with and including all fittings at new or old position, laid in floor along wall or at ceiling including cleaning, threading of steel water tubing complete all as specified and directed.

Demolition of lime concrete / lean concrete/ brick bats etc. from sunken slab portion exc. 15 cm thick but above ground floors, including removal of demolished material, out side MD land and deposited where directed, complete all as specified and directed.

M & L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in flooring laid in slope complete all as specified and directed .

M&L lean concrete type E-2 (1:5:10) using 40mm graded stone aggregates as in sunken portion complete all as specified and directed by Engineer-in-charge.

Supply only water proofing compound ISI marked complete all as specified and directed.

M&L for , Glazed ceramic coloured tiles 300mm x 200mm x 6mm to 7mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10mm thick rendering in cement mortar 1:4, including dismantling old tile and removing a distance upto 1.5Km from site, complete complete all as specified and directed.

M&L for , Glazed ceramic coloured tiles 300mm x 450mm x 7mm to 8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10mm thick rendering in cement mortar 1:4, including dismantling old tile and removing a distance upto 1.5Km from site complete all as specified and directed.

M&L for , Glazed ceramic coloured tiles 400mm x 400mm x 7mm to 8mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles including 10mm thick rendering in cement mortar 1:4, including dismantling old tile and removing a distance upto 1.5Km from site complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18 to 20mm thick over cement screed base 15mm thick in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling floor and removing a distance upto 1.5Km from site complete all as specified and directed.

M&L for machine cut kota stone slab as in vertical surfaces, 18 to 20mm thick over and including backing coat, 10 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling floor and removing a distance upto 1.5Km from site complete all as specified and directed.

S&F Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white colour, with integral foot rests (excluding flushing cistern and flush pipe), including 100mm 'P' or 'S' trap set in cement concrete 1:2:4, including making connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern ) white including connection to drain and flushing pipe antisyphonic pipes etc all as directed.

S&F in repairs stainless steel (AISI-304) cockroach trap round (dia 101 mm ) with and without waste hole complete all as specified and directed.

S&F in repair PVC syphonic action type flushing cistern 10 liter capacity, low level with inlet, ball valve, float and bracket with complete fittings complete all as specified and directed .

S&F in repair pegs set of 6 nos powder coated aluminium body fixed with chromium plated screwes complete all as specified and as directed.

S&F in repair 15 mm fancy type Stop valves cast copper alloy chromium plated with long shank and Cup ( Concealed Type) screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specified and directed.

S&F in repair 15 mm dia, fancy type, angle valves, cast copper alloy, screwed down high pressure with crutch both ends for iron pipes or for union and fixed complete all as specified and directed.

S&F in repair 15 mm dia, bib taps, long body, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair 15mm dia, bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms,complete all as specified and directed.

S&F in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwed down for iron pipes for wall mixture non telephonic complete all as specified and directed.

Fixing only in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwesd down for iron pipes for wall mixture non telephonic complete all as specified and directed.

S&F in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwed down for iron pipes for centre hole WHB mixture complete all as specified and directed.

Fixing only in repairs 15 mm brass chromium plated mixer for mixing Hot and Cold water screwesd down for iron pipes for ceter hole WHB mixture complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 20mm bore complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, 15mm bore complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling and PVC waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever 03 nos brackets of angle 30mmx30mm ,thickness 3-4mm,500mm long with PCC 1:2:4 B0 in wall and connecting union to pipe overall size 914mm x 460mm bowl size 410mm x 330mm x 203mm complete all as specified and directed. Make : Cat Part No 1240D of Prayag or equivalent as in Nirali/Bluestar/Pearl

S&F in repairs Stainless steel plate rack (utensil rack) of size 900 mm x 900 mm and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screwes including necessary fittings ,nut/ bolts complete all as specified and directed. Make : Cat Part No P-346 of Prayag or equivalent as in Nirali/Bluestar/Pearl

Supply & fix in repair fancy type elegant corner glass self 300 mm with (ABS Bracket ) 300x 600 Cat no -BEA-46 Make- Prayag or equivalent make of Hindware/ Cera brass polished chrome complete all as specified and directed.

S&F in repairs Vitreous china wash hand basin, white, flat back size 550 mm X 400 mm including brackets, cutting in wall and pinning in ends of bracket or erecting, stand with PCC 1:2:4 Type B1, including waste coupling and waste pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of lengh 450 mm long complete all as specified and directed.

S&F in repairs 15 mm dia fancy type, pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or with out lettered Hot and Cold with long screwed complet all as specified and directed.

S&F in repairs of drapery rod/ curtain rod 25 mm dia, MS powder coated of thickness 20 gauge with standard type socket including brackets, side golden colours doms, wall to wall, finel, rings, complete all as directed.

S&F in repair PVC Jet spray (with 1.50 mtr tube) with all fittings complete all as directed.

S&F in repair health faucet chromium plated with hook stand Roman 2 In 1 Fucet 1.5 mtr tubes & Hook complete all as directed.

S&F in repairs plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as directed.

S&F in repairs, chromium plated shower roses, swivel shower, brass, chromium plated with arm 100 mm size for fixing with 15 mm pipe with swivel joints, any size including fixing to steel pipe or union complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specifications complete all as specified and directed.

S&F factory made solid PVC moulded door shutters, 28 to 30 mm thick (stile:), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, in frame at site complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm aluminium handles, cast type, anodised, complete all as specified and directed.

S&F factory made box type steel powder coated ventilators composite type with double rebated pressed steel frames 80 mm x 60mm (Peripherral) and 80x75mm (Intermediate members) made out of cold rolled 1.25mm thick sheet having steel window/vertilators shutter of MS tubular section of size 50mm x 20mm x 1-1mm thick fixed with box type hinges including 10mm x 10mm MS hollow tubular section as in beading for glazed and wire shutter handle of 100mm size made out of Z section 01 No, MS stove enamelled black tower bolt of size 120mm 02 Nos, 150 mm mild steel hooks and eyes, each sutter with flat iron 40mm x 1.25mm and 200mm long hold fasts 04 Nos in each window including necessary filling hollow frame with PCC (1:3:6) , cuttings holes in wall, making good existing disturbed surfaces as per existing specifications and 10mm x 10 mm mild steel solid square bar as grill (100mm c/c) fixed to window/ ventilators frame using neceassary welding complete all as specified & directed.

Hacking out old broken glass (any thickness) from wooden/steel frames, glazed with oil putty or fixed with screws complete all as specified & directed.

S&F 4mm thick, sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.5 Sqm in each pane, complete all as specified & directed.

S&F 4 mm thick, pin headed, sheet glass, glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F galvanised mild steel, wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and with tinned tacks complete all as specified & directed.

M&L for prepartion of new or previously untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint (1st quality), over 10 cm in width or girth, over one coat of red oxide oxide primer complete all as specified and directed.

Grubbing up tree trunk girth n.exc 15 cm including cutting of trunk portion protuding over wall surface/roof surface/terrace of building of height up to 10.0 mtr. Including necessary scaffolding and necessary safety measure if required and make good the surface in cement mortar (1:3) and applying one coat of anti growth of vegitation chemical directed. and removing of unserviceable material out side MD land and cleaning site complete all as specified and directed.

S & F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with close top), HDPE, white colour triple layered with ISI marked of 500 ltrs capacity with inlet & outlet connections, 20mm dia PVC float valve with ball including all fittings, tank nipple 150 mm long with washer & plug , with tank lid having locking arrangement hoisted and fixed in position complete all as specified and directed including dismantling existing water storage tanks (RCC/PVC) of capacity upto 500 litre complete all as specified and directed. Make:- ISI marked of Sintex/Polytuf/Polycon/Diplast

Demolition of RCC slabs any thickness any size reinforced and removing a distance upto 1.5Km from site complete all as specified and directed.

Dismantling of reinforced cement concrete jallies (reinforcement cut as required to facilitate dismantling) from roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended up to height of building 10 mtr including making good edges and removing a distance upto 1.5Km from site, complete all as specified and directed.

M&L for form work to sides and soffits of chajja’s, lintels, balconies, facias & similar items with rough finished surface of concrete, complete all as specified and directed. .

M&L for RCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate in chajja’s, lintels, balconies, facias and the like, complete all as specified and directed.

M&L for mild steel TMT bars, 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia, quality confirming to Fe-410-S, complete all as specified and directed.

M&L 18-20 mm thick, granite of any type work in steps, jambs, pillars, window cill, cooking platform and like in cement mortar 1:4 including pointing in white cement using marble dust with admixure of pigment to match with shade of granite, 20 mm thick incuding making bull nosing including dismantling old nd removing a distance upto 1.5Km from site including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Supply and fix in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Supply and fix in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs, CP towel rail, 60cm long fixed with screws, complete all as specified and directed.

M&L for resecuring or easing and adjusting without taking down shutter from the frame and re-fixing builders hardware as required including removing of unserviceable screws etc size of shutter n.exc 2Sqm each complete all as specified and directed.

S&F in repair extruded aluminium alloy handle 125mm, fabricated type, anodized, complete all as specified and directed.

Taking down shutter of any description exc 1.0 sqm but n.ex 2.0 Sqm each and removing to or from store, complete all as specified and directed.

S&F in repair 150mm long aluminium anodized barrel tower bolt, complete all as specified and directed.

S&F in repair 100mm long mild steel butt hinges, complete all as specified and directed.

M&L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n.exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed.

S&F in repair door seal strip with plastic beading n.exc 1m length, complete all as specified and directed.

Note:- Amount of credit of Rs. 112250.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

ASW ENTERPRISES

VARUN TRADERS

MOHAMMAD RASHID

Baba Engineers and Contractors

MS FUTEC ENGINEERS

M/S MATLOOB AHMED

Bharat Enterprises

M/s Anil Kumar

KUMAR AND COMPANY

Supreet Associates