REPAIR TO BOUNDARY WALL, SECURITY FENCING, DRAINS AND OTHER CONNECTED BR WORKS AT ZONE I AND ZONE II IN THE AREA OF AGE BR I UNDER GE (EAST) DELHI CANTT-10 (GE/DE-72/2020-21)

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, embedded in natural ground etc., complete all as specified and as directed.

Dismantling of galvanised Barbed wire/concertina coil 2 strand of any type and at any place fixed to wooden members steel or RCC post complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins,arches,pillars,etc but excluding ashlar facings dressed stone work and precast concrete articles and removing rubbish complete all as specified and as directed.

Dismantling structural steel work including doors, gates,rafter ,purlin etc similar works complete all as specified and as directed.

Demolition of Sign boards of any description, any size including Making good of site complete all as specified and as directed.

Taking down Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering /Wall coveing complete all as specified and as directed.

Dismantling of RCC Jalli of any description and in position and unserviceable Jalli removed from site and serviceable RCC Jalli stactaking at site after cleaning/dusting for fixing the same complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc and not exceeding 10Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in any type of soil complete all as specified and as directed.

Excavation in post holes(for similar holes) each n. exc. 0.50 Cu.m, getting out, returning filling in and ramming earth or broken rubbles mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces in any type of soil, complete all as specified and as directed.

Cutting holes in brick wall n.exc half brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (20mm graded stone aggregate), complete all as specified and as directed.

Plain Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete including complete all as specified & directed.

Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

All as per description of Srl item No. 13 here-in-before but except brick, complete all as specified and as directed.

Brickwork with sub class `B' bricks, straight or curved on plan built to any radius in half thick brick built in cement mortar1:4, complete all as specified and as directed.

Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified and as directed.

Mild steel angle Iron post and struts in fencing including cutting as making hape including welding with proper overlapping & Welding MS Plate with angle iron bottom as directed, drilling holes notching for wire etc embedded in concrete fixed vertically conforming to grade Fe-290-Gde E-165 complete all as specified and as directed.

10 mm dia steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends exc 10cm and n exc 15cm long long, complete all as specified and as directed.

Concertina coil 600mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG) fixed over barbed wire with angle iron including tying concertina coil with barbed wire at points wherever coil toucheds the bottom of barbed wire with the help of hog rings (14 SWG) complete all as specified and as directed. Note : a) Barbed wire and angle iron shall be measured and paid separately. b) Hogging shall be fixed at a interval of 600mm c/c wherever it touches with the barbed wire and overlapping of concertina coil and Barbed wire shall be 300mm. It shall be deemed to be included in the unit rate.

Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc., complete all as specified and as directed. Note : (Each line wire is to be measured)

Supply only MS galvanised Chain link fencing any size or type as approved by GE, complete all as specified and as directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an color having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

35mm thick pre-cast cement concrete (1:2:4), type B-O, using 12.5mm graded stone aggregate as in louvers and jallies, including mouldings & frame work, complete all as specified and as directed.

All as per description of Srl item No. 23 here-in-before but except RCC jalli, complete all as specified and as directed.

Precast RCC coping /post suitable for fixing of RCC jalli in vertically and horizontally incl necessary moulds and grooves as reqd shape and size complete all as specified and as directed.

Plain Cement concrete 1:2:4, type B-1, (20mm graded stone aggregate) in mass concrete, complete all as specified and as directed

Taking down cement plaster on brick or stone wall etc including racking out jointshacking for key; scrubbing down with water, complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4 on even surfaces of brick work or concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick cement plastring in cement mortar 1:4 on other han fair faces of brick wotrk or concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Washed stone grit plaster on exteriour walls in two layers, under layer 12mm cement plaster 1:4 (1 cemnt : 4 coarse sand) throwing the under layer with scratching tool, applying cement slurry on the under layer @3Kg of cemnt per square metere, top Layer 15 mm cemnt plaste 1:1/2:2 ( 1 Cement:1/2 coarse sand:2 stone chipping 10mm nominal size) in pannels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and as directed.

Preparing new plastered surfaces of walls two coats of exterior emulsion paint (Weather Coat) over a coat of white primer etc., complete all as specified and as directed.

Applying two coats of synthetic enamel ordinary tint paint including red oxide primer and prepartion extra complete on new steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Factory made flush shutter 30mm thick, Solid core construction with Block board and plywood face pannels, commercial type on both sides, complete all as specified and as directed.

Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mmx2mm thickness ,shutters of aluminium section ofsize 85mm x44mm x2mm thick Top rail and both styled of size 100 mmx44mmx2mm thick lock rail and bottom rail of xize 115mm x 44mm x2mm thick incl aluminium anodised snap beading and rubber packing & 5.50 mm thick froasted designer glass(ass approved by GE) incl 100 mm long alm butt hinges 04 Nos each leaf 200mm long tower bolt ,.200 mm long fancy ryper alm handle -02 Nos on each leaf ,4 leaver brass 100mm long mortick lock & doubble action floor door spring heavy duty suitable to 1M wide shutter for each leaf, complete all as specified and as directed.

Taking down Kitchen Cabinet/wardrob/shelf/cupboard etc similar article in any description and any position and removing from site including all fittings and frame work, complete all as specified and as directed.

Fabrication & fixing of kitchen cabinet & wardrobe/ cupboard made out of 15-18 mm thick PVC board (one side laminated and other side balancing white) including providing cabinet for keeping baskets/ cutlery basket etc, complete all as specified and as directed. Make : Rajshree or equivalent Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only

PVC sheet white 15 mm thick fixed with approved adhesive and stainless steel machine screw (Star) in narrow widths of n-exc 10 cm width, complete all as specified and as directed.

Supply only Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/15204 or equivalent approved

Supply only Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/TB/15208 or equivalent approved

Supply only Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/PTH/15206 or equivalent approved

Supply only Stainless steel Partition basket of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/PRT/17206 or equivalent approved

Supply only Stainless steel Cutlary basket of size 50cmx37cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approvedMake: Life style Cat part No WA/CUT/15204 or equivalent approved

Supply only Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/POB/15206 or equivalent approved

Supply only Stainless steel bottol full out of size 50cmx40cmx16cm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No FF/BPO/62018 or equivalent approved

Supply only Stainless steel grid basket (plain) of size 50cmx52cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/21208 or equivalent approved

Magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and as directed.

75 mm dia oval shape brass handle fancy type polished bright finish, complete all as specified and as directed.

150 mm dia oval shape brass handle fancy type polished bright finish, complete all as specified and as directed.

Continuous (Piano) hinges, brass body 30 mm width of flaps (when open), complete all as specified and as directed.

150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified and as directed.

Cup board lock of superior quality complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

Extruded aluminium anodised handles fabricated type of size 150mm size, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm size, complete all as specified and as directed.

Demolition of Stone slabs and tiles laid, bedded and pointed in any description or thickness in floors, aprons etc rubbish off the premises complete all as specified and as directed.

20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed in Cement Mortar (1:4) complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed.

Premium quality glazed ceramic digital coloured tiles with highlighter of size 300x 600x 7 mmthick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles including 10 mm thick cement mortar 1:4 for backing coat, complete all as specified and as directed.

Standard Quality exterior digital interlock 3DHD tiles designer type of size 300 x 450mm x 6mm thick coloured for wall etc set & jointed in solvent and pointed in coloured cement to match the tile including 15 mm thick cement mortar 1:4 for backing coat, complete all as specified and as directed.

Vitrified ceramic tiles Dark shed 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and as directed.

Vitrified ceramic tiles Dark shed 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles incl 10 mm thick cement mortar 1:4 for backing coat, complete all as specified and as directed

Stainless steel letter, comma, dash, logo etc., of 300mm height and 32mm depth made of 1mm thick stainless sheet with seemless welding rubbed, polished and edges made smooth with necessary fixing devices, complete all as specified and as directed.

Aluminium composite panel sheet 3mm thick of approved make joint with cilicon/adhesive as per manufacturer instrction including with necessary MS framed work as required shape and sized by welding etc in ceiling/coloumns and in vertical surface complete all as specified and directed. Note : 1. MS framed work shall be measured and paid separately. 2. Colour and pattern of Sheet will be appoved by GE 3.The rates of necessary scafolding and working platform is included in quoted rate and work is to be carried at approximate 4mtr height.

3 mm thick Fibre glass reinforced translucent colourd plain/lcorrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, gate etc., similar work including dismantaling old PVC sheet complete all as specified and as directed.

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling boarding, any description, complete all as specified and as directed.

5mm thick PVC sheet fillet of width 35mm for PVC wall penneling frame work fixed with Screw and gutty in any vertically and horizontally including taking down existing unsv frame work, complete all as specified and as directed.

Taking down existing ceiling of any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . ( d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

25mm dia aluminium anodised powder coated Drapry rod fixed, complete all as specified and as directed.

25mm dia brass fancy type bracket and globes fixed with PVC gutty and screws, complete all as specified and as directed.

PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

PVC waste pipe 32/40mm dia, 60 cm long for WHB & Sink with cup, fixed in repairs, complete all as specified and as directed.

PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description, complete all as specified and as directed. (Make: - Hindware /Parryware/Cera or equivalent)

Vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap, fixed in repairs, complete all as specified and as directed.

Vitreous china Floor mounted toilet one piece type closet pan (Italian collection ) white caskade type (Integrated modle) including vitreous china flushing sistern flush pipe ,CP Jet spray with connection ,PVC sheet cover with P or S trap including taking down existing EWC, complete all as specified and as directed.

Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, complete all as specifed and as directed. (Make- Jaquar Cat part No CON 107KN or equivalent in Hindware/Cera/Somany

Stop valves/Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specifed and as directed.

15mm dia Brass centre hole CP mixer for mixing hot & cold fancy type screwed down, high pressure long screwed shanks and fly nuts, fixed in repairs, complete all as specifed and as directed.

Wall mixer 3 inlet system with provn of both shower (hand shower and over head shower) complete with sutable long bend pipe conncetin leg ,CP flage etc., fixed in repairs, complete all as specifed and as directed. (Make- Jaquar Cat part No CON 281KN or equivalent in Hindware/Cera/Somany

Sink mixer with regular swinging spout (wall mounted modle ) with connecting legs & wall flanges) for 15 mm bore complete all as specified and as directed. (Make- Jaquar Cat part No FLR-5309N or equivalent in Hindware/Cera/Somany

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs, complete all as specified and as directed.

Corner glass self of size 225mm x 225 mm. Make Jaquar. Cat No ACN 1173 or equivalent in Somany/Cera/Hindware

Stainless steel sign board both sides comprising of the followings:- (a) Two Nos of Stainless Steel Pipe 75mm Heavy gde of length 2100 mm incl top fancy cap and at bottom four no of anchors for embedding in PCC (b) Stainless Steel 25 mm Square Pipe frame of size 1200 mm x750 mm at one side welded butt and bright finished fixed to SS pipe with stainless steel Cup Head Screw of suitable Size. (c) Providing 2mm thick anodised aluminium sheet of size 1200mmx750mm fixed with ss scerw to SS Square tube complete. (d) Complete layering of any Colour retro reflective Poly carbonate trimethane sheet cut to shape and fixed over base plate as per IRC-67-1977 of any colour complete all as specified and as directed. (e) Providing of 25mm wide retro reflective Poly carbonate white Bordar retro reflective Poly carbonate sheet all around complete. (f) S & F of retro reflective Poly carbonate trimethane sheet letters / sign/arrow etc cut to shape and fixed over base plate as per IRC-67-1977 of any colour of 25mmx150mm (Width x height) complete all as specified and as directed. Make 3M/gogiaplastic as approved by GE. Note – Location and sample of Sign board work shall be approved by GE.

Steel gate Ornamental type/Grill work including hold fasts, pintels, stoppers running rails, bushes and all as CI decorative pieces, locking arrangement etc complete all as per design approved and as directed by Engr-in-charge work conforming to Fe-410-O etc complete all as specified and as directed.

Stainless steel sign board both sides comprising of the followings:- (a) Two Nos of Stainless Steel Pipe 100mm dia Heavy gde of length 4000mm incl top fancy cap and at bottom four no of anchors for embedding in PCC (b) Stainless Steel 50 mm Square Pipe frame of size 2500mm x1250 mm at one side welded butt and bright finished fixed to SS pipe with stainless steel Cup Head Screw of suitable Size. (c) Providing 2.00mm thick anodised aluminium sheet of size 2500mmx1250mm fixed with ss scerw to SS Square tube complete. (d) Complete layering of any Colour retro reflective Poly carbonate trimethane sheet cut to shape and fixed over base plate as per IRC-67-1977 of any colour complete all as specified and directed. (e) Providing of 50mm wide retro reflective Poly carbonate white Bordar retro reflective Poly carbonate sheet all around complete. (f) Retro reflective Poly carbonate trimethane sheet letters / sign/arrow/dash etc cut to shape and fixed over base plate as per sample of any colour of size 50 mm x300mm (Width x height) complete all as specified and as directed. Make : 3M/gogiaplastic Note – Location and sample of Sign board work shall be approved by GE.

Providing services on related to welding & black smith work based on day to day complaints on all working days (except Sunday and gazetted Holiday) from 0900 hours to 1700 hours complete all as specified and directed. Note :- The above task shall be carried out by deploying minimum 01 Welder having black smith skills and 01 Helper on daily basis. 2. Necessary T&P, ladders, minor consumable viz welding rods/extras, equipment and safety gear shall be provided by the Contractors. Quoted rates deemed to include above provisions 3. All replaceble material shall be issued from MES store.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

Vipul Construction

Akhil Enterprises

MAA SANTOSHI ENTERPRISES

S GOURAV PRAKASH ENTERPRISES