REPAIR TO DOOR, WINDOWS, PLASTERING PLUMBING, FLOORING AND OTHER MISC WORK AT CHILDREN SCHOOL, SOLAR POWER PLANT, MES INSTALLATION ETC OF AGE B/R-V UNDER GE (MCTE) MHOW

Amount

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of birla white wall putty all as directed by Engr-in-Charge.

M&L for preparing new surfaces of walls and applying two coat of cement based paint complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site)

M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash all as directed by Engr-in-Charge.

M&L for preparation of old plaster surfaces of ceiling and applying one coat of distemper all as directed by Engr-in-Charge.

M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M&L for preparation of surfaces and applying one coat Acrylic emulsion with roller on old treated surfaces of wall etc complete all as specified and directed (Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means)

M&L for complete removal of existing treatment and preparation of surfaces and applying two coat Acrylic emulsion with roller over applying minimum 1mm thick birla white wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed (Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means)

M&L for preparation of old plaster surfaces of wall and applying one coat of white wash all as directed by Engr-in-Charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

All as per item No.16 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

All as per item No.18 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

All as per item No.20 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 200 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm/ 300X 600X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

S&F in repair Stainless steel curtain rod/rail 25 mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook.

S&F in repair 110 mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15 mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S&F in repair laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S&F in repair laying and testing for 20 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S & F in repairs Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge .

S & F in reparis Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

S& F in repairs Flush Pipe of polyethylene of low or high density or PVC , 32 mm dia, for low level cistern

S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden / steel window in square n exc 0.5 Sqm in each pane.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M & L for fixed in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F in repair PVC water tank covers premium quality fitted to tank . Make - Syntex or equivalent water tanks of Cap 500 ltrs to 1000 ltr complete all as specified and directed.

S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank all as specified in SSR Part I

S&F in repair 500ltr capacity rotational moulded polythyiene water storages tanks (cylindrical vartical with closed top) hoisted and fixed in position including removing the existing water tankall as specified in SSR Part-I (complete all as specified and as directed).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60 x 1.25mm thickness with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60 x 1.25mm thickness with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.complete all as specified and as directed.

M & L for PCC 1:2:4 type B0(12.5 mm graded) aggregate for filling in pressed steel door framed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F 35mm thick second class hardwood rail and style, Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Solid PVC door frame of size 50mm 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing on SSR Part-II.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing on SSR Part-II

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:- (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall – 06 No per window. Make : Jindal or equivalant approved by GE.

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 using old size bricks, complete all as specified

S&F, solid PVC wall panelling consisting of 5mm thick wood grain painted PVC sheet fillet of wight 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed

Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres as directed by Engineer-in-Charge.

M&L for 10mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete.

M&L for PCC 25mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/ 50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/chhaja and roof kerbs/ benching complete all as specified and directed.

Supply & providing & testing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd or equivalant approved by the GE, having 10 years gaurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface.NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer.

M & L for Water proofing on roof/wall with the follwing steps including 10 year gaurantee & testing for water tightness:- STEP-1. Firstly to cleain the existing surface and make the surface dust free. STEP- II. Crack more then 0.5mm the opening of crack in V grove and filling with epoxy mortor. STEP-III. Initial coat (mixed 1/2 liter of water in 1 liter of Roof/wall seal of Asian paint/ PIDILITE/ STP/ FOSROC/ACC/ L&T/MARUIT) as a primer (Area cover 1 liter=9-10 sqmtr) STEP-IV. After six hours of primer, apply first coat( one coat) of Asian paint/ PIDILITE/ STP/ FOSROC/ACC/ L&T/MARUIT. roof / wall seal in a particular direction without mixing of water. Now left it for six hours (Area cover 1 liter = 1.2 sqm). STEP-V. After again six hours of first coat and apply the second coat of Roof / wall seal in a other direction without mixing of water (Area cover 1 litre = 1.2 sqmtr). Now left it 24 hours. all as specified and directed byEngr-in-Charge Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers of authorised applicator of manufacturer. Make Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT or equivalent approved by the GE.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F Plain, galvanised, mild steel sheeting thickness 0.63mm , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and as directed.

S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs 15 mm dia bore fancy type chromium plated swan neck pillar tap, cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repair heavy duty wall mixer legs,brass elbow,brass socket ,short pices, for pillar cock, CP stop cock, CP bib cock, concealed stop cock ,wall mixer, sink mixer in any size etc complete all as specified and directed.

S&F, in repair brass spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock ,wall mixer, sink mixer in any size etc complete all as specified and directed.

M&L for in repair 12mm thick plywood, commercial quality, BWR grade, type BB, 5 ply, fixed with screws to timber frame work complete all as specified and directed.

S&F, in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S&F in repair 50 x 15 mm size magnet door catcher for closing for PVC cabinet shutter and complete all as specifid and directed.

S&F in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

M&L, for welding in repairs not exc 2.5 cm each with thickness of metal to be welded not exc 6 mm, complete all as specified and directed.

M&L, for petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, bottle traps, etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed.

S&F, in repair PVC cover for Over head water tank of capacity 500 ltr and 1000 ltr complete all as specified & directed.

S and fix in repair table top wash basin of size 515x415x145 mm fixed complete incl CP waste coupling waste pipe pvc connection for hot and colled all as specified and directed. Make : Cera Cat Part No. S2020171 or equivalent approved by the GE.

S&F in repair 15mm bore PVC bib taps complete all as specified and directed.

S&F in repair rubber or PVC door seal 900mm long complete all as specified and directed

S&F looking mirror 6.3 mm thick exc 0.50 each pane Grinding, polishing and rounding off edges of glass, drilling holes in glass any type fixed on wall with chromium plated screws complete all as specified and as directed.

M&L for 300mm x 300mm x 10mm thick high traffic paver tiles (coloured) joint free as in floors and jointed with neat cement slurry and pointed in white/ coloured cement to match the surface laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge. Make : "ENDURA" by Johnson or equivelent in SOMANY/ORIENT (IS 4457 : 2007) approved by the GE

M & L for 100 mm thick PCC 1:4:8, type D2, with using 40 mm graded stone aggregate as in sub base to floors etc as specified and directed.

Jamna Constructions

M/S GARG CONSTRUCTION

sunway associates

Sudarshan Associates