CA NO CWE/PAT/T-07/2020-21 SPECIAL REPAIR TO BLDG NO P-210 (OR MD ACCN) UNDER GE (P) DAPPAR

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only integral liquid water proofing compound all as specified & as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian ( TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH).

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian ( TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH).

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian ( ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR).

S&F factory made flush shutters 35mm thick, confoirming to IS : 2202 (part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneer on both faces of shutters compete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC celuka Board wooden finish pre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F stainless steel tubing of 25 mm dia chromium plated 1 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets fency type, stops etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

M&L for anti-skid Premium (1st) quality colour tiles 400 x 400 mm and 7-8 mm thick, as in floor etc. in any pattern of light and dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in skirting etc.over and including 10mm thick screed in cement mortar (1 :4) over pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid Premium (1st) quality colour tiles 400 x 400 mm and 7-8 mm thick, as in floor etc. in any pattern of light and dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc.over and including 20mm thick screed in cement mortar (1 :4) over pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F vitreous china premium/1st quality wall hung wash basin white, flat back, size 500x400 mm screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F vitreous china premium/1st quality wash down water closet Pan (Pedestal pattern / EWC) S/P trap white colour of size 520 x 360 x 390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe, etc., with flush pipe 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing including taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) / Hindware (Slick) / Equivalent from Parryware.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) / Cera (Corona) / Prayag (Vintage).

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified. Make PRAYAG / POLYTUFF / SHAKTI

S&F 6mm thick looking mirror beveled edge fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish, etc.complete fixed in position all as specified and directed.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F PTMT 450 mm long shelf for wash basin , fixed in position complete all as specified.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F sink cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series) / Hindware (Contessa Plus Series) / Cera (Ocean Series) / Prayag ( Neptune Series)

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 914mm x460/203mm with bowl size 405x 354x203 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Prayag / Neelkanth / Nirali / Diamond

Disconnecting existing water tanks of 300 to 500 ltrs capacity, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting, reconnecting and incl S&F PVC water tank cover & 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the water tank complete all as specified and directed.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. Note : The extra area of 300mm around the actual affected area will be checked and repaired and only repaired portion will be taken for measurement.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

S&F cast iron 4 way junction for 100 mm bore with access door as in repair complete all as specified.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified.

M&L for Dummy joints/construction joints 8mmx10mm as in PCC floors filled with polyurethane elastic adhesive/sealant (white/grey colour) of aprrox density 1.3 kg/litre complete all as specified.

S&F stainless steel grating of size 150 x150 mm square in shape with waste hole complete all as directed by Engineer in Charge.

S&F pre-laminated PVC solid board as in frame for cupboard shutters 40mm thick (double sandwiched of 20mm) prelaminated on one side with wooden finished complete all as directed by Engineer in Charge.

S&F piano hinges, stainless steel 304 grade finished and fixed (size of hinges in 30mm) complete all as specified and directed.

S&F factory made pre-laminated PVC solid board 18-20 mm thick pre-laminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutter complete fixed in position in all respect all as specified and including supply and fixing of following items :- (a) Stainless steel (304 Grade) finished Tower bolt 200mm long- 01 Nos per leaf (b) Stainless steel (304 Grade) finished Handles 200mm - 01 Nos per leaf (c) Stainless steel (304 Grade) finished magnetic catchers - 02 Nos per leaf

S&F Modular metal box 10 module and complete all as specified & directed by Engr-in-Charge.

S&F LED tube light fitting single with LED tube 1x 20W 230 Volts complete all as specified and directe. Make : Havells/Philips/CG

S&F in replacement MCB TPN 40 Amprs 10 KA 'c' series 240 Volts ISI marked complete all as specified & directed by Engr-in-Charge. Make : Legrand/Schineder/ABB

S & F LED lamp 8 Watt retrofit complete all as specified. Make : Havells/Philips/CG

S&F in replacement of MCB SP upto 6-32 Amp 10 KA 'c' series 240 V ISI marked all as specified and directed.

S&F in replacement mirror light fitting LED 10W 230 V 2 ft all as specified and directed. Make : Legrand/Schineder/ABB

Swami Enterprises

SS BUILDERS