Improvement of Road Safety through providing traffic calming measures.

Amount

Providing and applying tack coat with emulsion pressure distributor at the rate of 0.20kg per sqm on the prepared surface/ granular surface cleaned with mechanical brooms for Fresh laid surface

Providing and laying bituminous concrete with 60- 90 TPH hot mix plant producing an average output of 75 ton per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6% of mix and filler transporting the hot mix to work site, laying with a hydrostatic Paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause 509 complete in all respect

Road marking with Hot applied thermoplastic compound with Reflectorising Glass beads as per clause no.803.1, 803.2, 803.4.1, 803.4.2, 803.4.4, 803.6 to 803.8 of specification of MoRT&H and as per direction of the Engineer-in-charge

Providing retro-reflectorised cautionary, Mandatory and Informatory sign boards as per IRC. 67 made of high intensity grade sheeting vide clause no. 801.3 fixed over aluminum sheeting 1.5mm thick supported on a mild steel angle iron post 75 x 75mm x 6mm size firmly fixed to the ground by means of properly designed foundation with M 15 cement concrete 45 x 45cm x 60cm 60cm below ground level as per drawing as per approved drawing

Solar Blinking red light

90CM equiltriangles

60Cm Circular

Hazard marker

Providing & fixing at site cat's eye/Raised pavement marker (NMC nail lens:- made out of Acrylic-strene-Acrylonitril of Hi Impact polystyrene fitted with moulded methacrylate (NMC) reflector cube corner reflector design; filled with tightly potting compound as per ASTM D 788 size etc complete as per direction of the Engineer-in-charge

Cat's eye / RPM

Median marker