Providing light weight shed over shops and garage at GSL officers Enclave and cladding work at Shipyard Sadan, Chicalim

Amount

BOQ 2- Amount excluding applicable tax

BOQ 3 - Applicable GST

Description of Work / Item(s)

Amount

Cladding for shipyard sadan shed, (item no.1 to 3) Structural steel work using TATA/ SAIL/ VIZAG/ TISCO/ JSW by Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with paint of approved brand and manufacture

Providing and fixing precoated galvanised iron profile sheets (TATA/JINDAL)(size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.All tools, plants, Scafolding,labour and materials.

Providing light weight shed over Shops and Garage at GSL officers Enclave, (item no.4 to 6) Structural steel work using TATA/SAIL/VIZAG/TISCO/JSW by Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with paint of approved brand and manufacture

Providing and fixing precoated galvanised iron profile sheets (TATA/JINDAL)(size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.All tools, plants, Scafolding,labour and materials.

Description of Work / Item(s)

Applicable GST (18% of BoQ 2)

deepak engineers and Contractors

GOA AEROMARINE AND ENGINEERING SERVICES PVT LTD

deepak engineers and Contractors

GOA AEROMARINE AND ENGINEERING SERVICES PVT LTD

deepak engineers and Contractors

GOA AEROMARINE AND ENGINEERING SERVICES PVT LTD