Construction and Beautification of Ajit Stadium at Village Dhanwapur Ward no.12, Zone-I, MCG, Gurugram, Haryana. Recall

Amount

Contraction / Transverse and Longitudinal Joints wherever required

SUB HEAD - VI: UPS system Supply, installation, testing and commissioning of UPS system comprising of 1 Nos. 5 kVA ( 1 Phase input and 1 Phase output) units . The UPS should be double conversion: online DSP Technology based IGBT Rectifier and inverter with 30 min backup. The UPS should have internally fitted with SNMP interface that will provide real time status information. The batteries should be sealed maintenance free The package shall include battery bank, stands, cables between UPS and battery bank, interconnecting links and related accessories as per specifications 5 kVA ( 1 Phase input and 1 Phase output) with 30 min backup

Supply and Plantation of Shrubs Height 1 m minimum Supplied in unit packs and plantation in complete, digging,manuring , watering, pruning, dressing with maintenance for 3 months (NS) 01 Allamanda nerifolia BUSH ALLAMANDA 02 Caesalpinia pulcherrima PEACOCK FLOWER 03 Calliandra brevipes PINK POWDEPUFF 05 Cestrum nocturnum NIGHT JASMINE 10 Hibiscus rosa - sinensis CHINA ROSE 11 Ixora sps IXORA / RKMANI 12 Jasminum grandiflorum CHAMELI / JUHI / MALTI 19 Laltana camara LALTANA 20 Laltana montevidensis TRAILING LALTANA 21 Murraya paniculata ORANGE JASMINE 22 Poinsettia pulcherrima POINSETTIA 25 Tecoma stans TECOMA

` Supply, Installation ,Testing and Commissioning of IP Camera Dome ½.8`` Progressive Scan, Backlight illuminated CMOS Sensor 5 Megapixel (2592 x 1944) H.265 and H.264 Four – stream encoding Shutter speed 1/15s-1/100000s, WDR(120dB), Day/Night Camera Switching , Motion detection, View Tamper Detection, Tripwire detection, object Intrusion, 2 DNR, 3 DNRAWB, AGC, BLC 4 mm fixed lens, IR Range of 50 Mtrs, POE (802.3af/at), 12 V 2A, SD Card. UL, CE, FCC, EN/IEC, IP66, IK10, BIS. complete as per specifications as required Make :- Bosch/ Axis/Panasonic/Avigilon/ Pelco/Honeywell/Matrix`

` ACOUSTIC LINING Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.`

`Boom Barrier Automatic 620 Rapid- Boom Barrier upto 3 meters beam for car Parking. -hydraulic motor with pistons -100% duty cycle - control board 624BLD: - patented electronic slow down: -opening time 1.5- 2.5 Sec . ( at all Entry and Exits ) `

`Giraffe Slide (FRP Plastic Body): `11’L x 2’W. Body is made of molded fiberglass reinforced plastic of 3mm thick with 450 grade fiberglass and ISO resin and also mix with cobalt and catalyst to give body good strength. Slide is 8’long x 6mm thick which connected with m.s platform is of m.s angle 40 x 5mm which laid with FRP chequered sheet of 5mm thick with suitable PU Primer and PU Paints with artistic painting. Complete item with GST, Transportation, Installation with C.C and labor at site. `

`INLINE FAN Supply, installation, testing and commissioning of Inline fan suitable for following capacities complete with sheet metal casing, electric motor and centrifugal fan suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, 15 Amp plug and wiring between the fan and the socket and accessories like gravity louvers , wire guard, bird screen and canvas connection etc. ` 1200 CFM, 15mmwg static

`INSULATION Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class ``O``) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. Insulation as per CPWD-2017 specification. 13mm`

`PROPELLER FAN Supplying, installation, testing and commissioning of Propeller type fans for following capacities complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, 15 Amp plug and wiring between the fan and the socke, mountings, frames, louvers and bird screen etc.` 225 mm dia

`PROPELLER FAN Supplying, installation, testing and commissioning of Propeller type fans for following capacities complete with electric motor suitable for operation on 220 V ± 10%,50 Hz, 1 phase AC supply fitted with speed regulator, 15 Amp plug and wiring between the fan and the socke, mountings, frames, louvers and bird screen etc.` 150 mm dia

`Providing and Fixing Wooden Flooring made of Maple wood 20mm thick, 56-100 mm wide laid over wooden runners 35mm x 60mm which rest on 11mm rubber air pads, which in turn rest on a PE moisture barrier. The maple wooden pieces are joined together in a tongue-and-groove fashion. Nailing is done on the tongue of the plank, so that the nails are not exposed. The runners are Deodhar/Pine or similar wood. The wood may be of varying width and length but each line will be of the same width. All wood will be anti-termite treated. The runners are laid horizontally across the court (21 ft) from wall to wall and rubber cushions are fixed under them `

`Providing and fixing chain link fencing around, the tennis court complete with required shade of paint over primer with, below mentioned specification 1. 2” x2” GI Chain Link jaali, 12 gauge 2. All Vertical pipes are 50 NB, 14 gauge 3. All Horizontal pipes are 40 NB, 14 gauge 4. 10’ fencing all around, pipes at base, middle and top All Complete as per Satisfaction of Engineer In Charge. `

`Providing and fixing Set of 3.2m Basketball Poles with 8” round pipes and 25mm Acrylic sheet, complete with rings and net, including installation: transportation extra on actuals. All Complete as per Satisfaction of Engineer In Charge

`Providing and fixing standerd volleyball net post with garware net and all required fixing accessories. All Complete as per Satisfaction of Engineer In Charge

`Supply of Photocell based safety device to avoid closing of the barrier when a Vehicle is crossing the barrier. ( Anti Fall Protection ) `

`Supply and installation of Be 12MM BOX UP series cubicles of width and depth as per specifications/ site drawings. DESCRIPTION Made from solid grade compact high pressure laminate as per IS:2046 manufactured under high specific pressure ) 5 MPa and temperature )120oC with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti and moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. Panel thickness min 12 mm. Design no. as specified by Arch. / Engr. in suede finish. Size of panels to be as per drawing. Wall joinery section with hamming profile made from Stainless steel grade 304. Surface finish to be brush type. A thin plastic film pasted for surface protection. Size to be 21mmx16mmx0.8 mmT. • Fixed front panel to be anchored to floor with L Bracket of SS and covered with SS 316 Grade Box Type plate from all directions with 100mm clear Height from ground. Surface finish to be matt type.• Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.• Conical shape Coat hook with rubber stopper made from Stainless steel grade 304. Surface finish to be matt type.• Round Door knob diameter 30 mm with grooves for better hand grip made from Stainless steel grade 304. Surface finish to be matt type.• Rotating Thumb-turn locking system with privacy indicator made from Stainless steel grade 304. Surface finish to be matt type.• Anti-noise rubber padding of thickness 2 mm and width 10 mm • Stainless steel grade 304 screws. • Anti-rotation Nylon polyamide grade-6 expandable wall plugs.`

`Supply of a set of Entry/Exit push buttons for manual open and closing of barriers etc. complete as required.(for Gate Entry/Exit) `

`Supply of 45W IP66, IK07, 5700K, 45W LED Streetlight with 4500 lm System Lumen Output. The luminaire shall have Pressure die-cast aluminum alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, Low Voltage and High Voltage cut-off, separate optical and control gear compartment and Bottom Opening for easy maintenance. Luminaire shall have High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED )140 lm/W. Luminaire shall have Tempered protective toughened glass, thermal shock and impact resistant fixed to the housing with SS screws. Asymmetrical batwing light distribution. The luminaire shall have Powered by built-in potted LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Low Voltage and High Voltage cut-off, Surge Voltage protection upto 6 kV and other safety test as per IS 15885 Part-2/Sec 13. Operating temperature: -10 °C to plus 50 °C, Operating voltage range: 100 V - 300 V, Average life L70B50: 50000 hours. Power Factor=0.95 and THD(=10. CRI (Ra)=70. Havells Sundown 45W TG SL, Endo, LT `

`Supply of 45W IP66, IK07, 5700K, 45W LED Streetlight with 4500 lm System Lumen Output.The luminaire shall have Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, Low Voltage and High Voltage cut-off, separate optical and control gear compartment and Bottom Opening for easy maintenance. Luminaire shall have High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED )140 lm/W. Luminaire shall have Tempered protective toughened glass, thermal shock and impact resistant fixed to the housing with SS screws. Asymmetrical batwing light distribution. The luminaire shall have Powered by built-in potted LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Low Voltage and High Voltage cut-off, Surge Voltage protection upto 6 kV and other safety test as per IS 15885 Part-2/Sec 13. Operating temperature: -10 °C to plus 50 °C, Operating voltage range: 100 V - 300 V, Average life L70B50: 50000 hours. Power Factor=0.95 and THD(=10. CRI (Ra)=70. Havells Sundown 45W TG SL, Endo, LT `

`Supply of Loop detector for closing of the barrier when a Vehicle crosses the barrier. `

`Supply, Installation ,Testing and Commissioning of 64 Channel Network Video Recorder with 4K Support and 8HDD Slots, 64 IP Channel Inputs: Display: 1 x VGA and 2 x Display Port, Dual Input Hot Swap Redundant (1 plus 1) Power Supply,8 Hot Swap 3.5``/2.5`` SATA HDD/SSD Drive Bay (10TB Capacity, Hard Disk Not Included), 4x 1 GbE Network throughput for Recording, Streaming and Storage Unit Network Connections, Onvif and Major Brand Camera Support with 12MP, 8MP, 5MP,3MP, 2MP, 1080P, D1 and CIF Recording. Multi-stream Support, Real Time Notification using SMS and Email, 1 x 4k/4 x 3MP/9 x 1080P/12 x 720P/16 x D1 Local Decoding, H.265/H.264/MJPEG Video Compression, Save Storage Additionally using Adaptive Recording and 3 Level, Remote and Centralized Viewing and Management and Mobile Clients, Cert: BIS, FCC, CE, complete as per specifications as required Make :- Bosch/ Axis/Panasonic/Avigilon/ Pelco/Honeywell/Matrix`

`Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.`

AC panel Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 plus 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections and indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. Incoming: 1 No. of 125Amp 4P MCCB of 25 kA (Ics=Icu) Breaking capacity thermal based release with On Indicating Lamp with 2A SP MCB back-up. Bus Bars: Electrolytic high conductivity aluminium three phase and neutral (full rated)busbars rated at 433V,50 Hz., 160 amps, 25kA, insulated with heat shrinkable coloured PVC sleeves and clip on shrouds for joints. Outgoing: 32A 4P MCB `10kA` - 5 nos. (1 no. spare) 63A 4P MCB `10kA` - 5 nos. (1 no. spare)

AC panel Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 plus 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections and indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. Incoming: 1 No. of 63Amp 4P MCCB of 16 kA (Ics=Icu) Breaking capacity thermal based release with On Indicating Lamp with 2A SP MCB back-up. Bus Bars: Electrolytic high conductivity aluminium three phase and neutral (full rated)busbars rated at 433V,50 Hz., 80 amps, 16kA, insulated with heat shrinkable coloured PVC sleeves and clip on shrouds for joints. Outgoing: 40A 4P MCB `10kA` - 5 nos. (1 no. spare) AC panel

ACTIVATED CARBON FILTER (for Domestic) Supply, installation, testing and commissioning of vertical self supporting Activated Carbon Filter (ACF) fabricated from FRP as per IS : 2825, ASMI code, complete with pressure gauges at inlet and outlet, sample cock, PVC face piping with ABS multiport valves and all accessories, with initial charge of filter media for activated carbon filter, lining inside with PP and FRP wounded outside, testing and commissioning complete. Capacity : 100 LPM Filtration rate : 15-17 M³/M²/hr Max. operating pressure : 3.5 kg/Sq.cm Test pressure : 5.5 Kg/Sq.cm

Aluminium Torsion Spring Perf. 600 x 1200 Ceiling System with NWT :Supply and Fixing of torsion spring Tile Ceiling System comprising of Tile of 600 mm wide and 1200mm long manufactured out of 0.6mm thick Aluminium perforated 2.3mm dia 2.15/4.3mmc/c. With 22% openarea. The metal ceiling panels shall be downward accessible with a minimum of four(4) torsion springs perpanel. The Tile will be manufactured on advanced CAD/CAM equipment that includes several stages of manufacturing process, and special process of six roller sheet levelling to achieve flat panels. Torsion Spring panel with two side legs die formed and two end legs die formed and punched to receive torsion springs (min two springs each end or side) for secure engagement into Tee Grid main runners which are factory punched to receive torsion springs. Tiles willbe square edged. The metal ceiling panels shall be downward accessible with a minimumof four(4) torsion springs perpanel. TheTile shall bePolyester powder coated in white colour. Main Runners: 24x38x3600x.35(RAL9010), inverted “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on center spacing to match panel length. Cross Runners : 24x26x600x.35 (RAL9010)mm, inverted “Tee” sections designed to interlocking to web of main tee section on designated spacing. Cross tee length to match panel length.Cross tees are spaced spacing 1200mm on center maximum Suspension System: As per manufacturer standard considering type of plenum and its height. Paintfinish–The panels will be pretreated in latest nanotechnology process and electrostatically powdercoated with automatic Carona system and cured with gas catalytic

Arm Wheel/ Shoulder Wheel:- Providing, and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe

Badminton Court Panel Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 plus 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections and indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. Incoming: 1 No. of 160Amp 4P MCCB of 25 kA (Ics=Icu) Breaking capacity thermal based release with On Indicating Lamp with 2A SP MCB back-up. Bus Bars: Electrolytic high conductivity aluminium three phase and neutral (full rated)busbars rated at 433V,50 Hz., 160 amps, 25kA, insulated with heat shrinkable coloured PVC sleeves and clip on shrouds for joints. Outgoing: 125A 4P MCCB `16kA` - 2 nos. (1 no. spare) 63A 4P MCB `10kA` - 3 nos. (1 no. spare) 63A DP MCB `10kA` - 2 nos. (1 no. spare)

BUTTERFLY VALVE WITH ON/OFF TYPE MOTORIZED ACTUATOR Single phase 220V with limit switches, C I body and PN 1.6 pressure rating SS Disc and shaft of Feedback, BMS Compatible for overhead tank filling as specified duly insulated of following sizes as per specification and drawings. Cost should include necessary control wire (minimum size 1.5 sq.mm) 40 mm dia nominal

BUTTERFLY VALVE WITH ON/OFF TYPE MOTORIZED ACTUATOR Single phase 220V with limit switches, C I body and PN 1.6 pressure rating SS Disc and shaft of Feedback, BMS Compatible for overhead tank filling as specified duly insulated of following sizes as per specification and drawings. Cost should include necessary control wire (minimum size 1.5 sq.mm) 50 mm dia nominal

Chimney support Providing, designing, welding, fixing and painting (two coats of primer and two coats of synthetic enamel paint of approved shade) with suitable sizes of angle iron / MS channels supports along with a wall / water piping support and free standing structure on roof of terrace along with lightening arrester / aviation light for DG fume pipes as per CPCB approved norms and complete as required. (support details shall be got approved before execution).

Constructing Brick masonry percolation pit 3m dia and 5m deep with bricks of class designation 7.5 in cement mortar 1:6, base concrete 1:3:6 below the brick wall, including cost of necessary excavation in any type of soil, back filling as required in 20cm thick layers, dewatering if any, shuttering and shoring and disposal of surplus excavated material within the plot. 2 nos. 300mm dia borings to a depth of 50 metre (to be measured from the bottom of the percolation pit), provisioning and fixing 160 O.D. PVC pipes, tested to 6kg/sqcm, in each bore and upto the height of 300mm above the RCC top slab. The PVC pipe shall be slotted except 3.0 metres at the top and 3.0 metres below from the bottom of the percolation pit, which shall be blind. Top of the PVC pipe shall be covered with PVC Socket and plug. Each bore around the PVC pipe shall be filled with pea gravels. The percolation pit shall be filled with river stone/pebbles as per drawing and direction of Engineer in charge.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1 :4 (1 cement : 4 coarse sand) including 500x450 mm pre­ cast R.C.C. horizontal grating with frame complete as per standard design :

Constructing Silt trap of size 1500mm x 3000mm x 2000mm deep in brick masonry with bricks of class designation 7.5 in cement mortar 1:6 (1 cement: 6 coarse sand) including necessary excavation and foundation concrete 150mm thick in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate of 40mm nominal size), inside plaster 12mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement, C.C. floor, RCC slab in mix 1:2:4 and RCC baffle wall including reinforcement, centering and shuttering etc. and SFRC manhole cover and frame 610 x 455 mm heavy duty HD 10 conforming to IS: 12592 complete in all respects as per drawing and direction of Engineer in charge .

Corded Remote with control wiring (Approx. 8mtr.) with conduit for ductable split unit

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set

DUCTABLE SPLIT UNIT (Inverter Compressor_5 Star) Supplying, fixing, testing and commissioning of following capacity Ductable split air-conditioning unit suitable to operate from 415 plus 10% volt, 50 Hz, 3 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with Inverter compressor (with R-410a/R-32/R-134a) including first charges of gas, condenser coil, propeller fans controls, inter connection control panel. Compressor should be protected with inbuilt thermal protector, internal pressure reflief valve, high pressure cutout and low pressure cutout. Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. Necessary supporting arrangement for indoor unit, M.S. frame duly Powder Coated/ Epoxy painted as per approved shade by architect to locate Outdoor Unit with necessary vibration isolation arrangement as per site condition etc.The capacity guarantee should be ensured by the vendor. The minimum EER value of the units should be as per ECBC-2017. 3.3 TR

DUCTABLE SPLIT UNIT (Inverter Compressor_5 Star) Supplying, fixing, testing and commissioning of following capacity Ductable split air-conditioning unit suitable to operate from 415 plus 10% volt, 50 Hz, 3 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with Inverter compressor (with R-410a/R-32/R-134a) including first charges of gas, condenser coil, propeller fans controls, inter connection control panel. Compressor should be protected with inbuilt thermal protector, internal pressure reflief valve, high pressure cutout and low pressure cutout. Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. Necessary supporting arrangement for indoor unit, M.S. frame duly Powder Coated/ Epoxy painted as per approved shade by architect to locate Outdoor Unit with necessary vibration isolation arrangement as per site condition etc.The capacity guarantee should be ensured by the vendor. The minimum EER value of the units should be as per ECBC-2017. 5.5 TR

DUCTABLE SPLIT UNIT (Inverter Compressor_5 Star) Supplying, fixing, testing and commissioning of following capacity Ductable split air-conditioning unit suitable to operate from 415 plus 10% volt, 50 Hz, 3 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with Inverter compressor (with R-410a/R-32/R-134a) including first charges of gas, condenser coil, propeller fans controls, inter connection control panel. Compressor should be protected with inbuilt thermal protector, internal pressure reflief valve, high pressure cutout and low pressure cutout. Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. Necessary supporting arrangement for indoor unit, M.S. frame duly Powder Coated/ Epoxy painted as per approved shade by architect to locate Outdoor Unit with necessary vibration isolation arrangement as per site condition etc.The capacity guarantee should be ensured by the vendor. The minimum EER value of the units should be as per ECBC-2017. 8.5 TR

EXHAUST FANS -AXIAL FLOW TYPE Supply, installation, testing and commissioning of tube/Vane axial flow type exhaust air fan of suitable capacity with powder coated MS/ GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the impeller directly driven by TEFC induction motor (IE-2) and `H` class insulation suitable for 3 Phase, 50 Hz, 415±10% Volt, ac supply, Suitable capacity of TP isolator within M.S enclosure box with suitable length of cable for connection with fan from isolator complete as required and as per specifications. Fans should be AMCA certified and should be statically and dynamically balanced.The sound pressure should not exceed 80 db(A) at a distance of 3 Mts. Fan and Motor for Fire exhaust fans shall be suitable for operation at minimum 250 deg C for 2 hrs. Fan should be complete with all accessories including fire rated canvas connection with metallic flange, vibration isolators, gravity louvers, bird screen as specified in the specification. Fan total efficiency should not be less than 60%. 14000 CFM-30 mm static

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing and commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 1 Zone

FRP Dustbin (Tilting Type) of capacity 60 LTR. Body is made of moulded fiberglass re-inforced plastic of 2mm thick having its lid with handle. It fitted with m.s square pipe 1.25” x 1.25” x 14 gauge and m.s flat 50 x 5mm, 30 x 5mm base structure with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site.

HI WALL TYPE DX SPLIT UNIT ((Inverter Compressor_5 Star)) Supply, Installation, testing and commissioning of following capacity Hi-wall type split air-conditioning unit suitable to operate between 180-260 volt, 50 Hz, 1 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with Inverter compressor (with R-410a/R-32/R-134a), condenser coil, propeller fans controls, control panel, including control wiring, cordless remote, Necessary supporting arrangement for indoor unit, M.S. frame duly Powder Coated/ Epoxy painted as per approved shade by architect to locate Outdoor Unit with necessary vibration isolation arrangement as per site condition etc. The Unit should be at least 5 Star rated (on the date of procurements, the minimum EER value of the units should be as per ECBC-2017). The Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. The capacity guarantee should be ensured by the manufacturer. The provided unit should have inbuilt automatic voltage stabilizer with time delay realy. Civil Work such as wall hole making , wall chisling ,refilling of chiseling part with mortar etc as per site condition. Nitrogen pressure testing for leakages and flushing during installation and after commissioning between IDU and ODU with flare nuts The Outdoor unit Compressor must be provided with 5 Year Warranty Period. 1.0TR

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment,colour on metal, seat and base cover plate and fixing of equipment etc.

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped

Main LT Panel Assembling,loading,unloading,shifting,erecting,testing and commissioning of 415V, 3 Phase, 50 Hz., 4 wire system, sheet steel clad, dust and vermin proof cubical and Indoor type floor mounted, free standing extendible type Main LT Panel compartmentalized design and fabricated out of 2 mm CRCA sheet steel complete with suitable size of Aluminium Bus bars, Electrical interlocks as per the various status of all the equipments indicated on the drawings. Providing and Fixing of base plate / channel, P/F the following Switchgears, complete with earth Bus bar throughout the length of the panel, terminal arrangement for Incomings / Outgoings cables and also outgoing terminations for various sizes of cables, The incoming and outgoing feeders shall be accommodated in a modular multi-tier arrangement, adequate size bus duct/ cable alley, Painting, Earthing, Numbering, Danger plate etc. complete as required as per specifications and drawing attached. (Panel should have proper arrengments for future expension, etc. complete as required.) Transformer Incomer: Incoming: 1 No. of 315Amp 4P MCCB microprocessor release of 25 kA Breaking capacity with On Indicating Lamp with 2A SP MCB back-up. Set of Digital flush type class - 1 accuracy multifunction meters 0- 315A, showing V, A, PF, Hz, KW, KWH, KVAR, etc. with 3 Nos. cast resin current transformers of 315/5 Amp ratio, 15 VA Class 1 metering. 1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup protection. All necessary Control MCB`S, control terminals and control wiring, interlocking etc. required with FRLS copper wires ISI marked complete as required. Under/ Over voltage, earth fault ,Master trip relays along with current transformers of 315/5A ratio, 15 VA class-5P10 protection - 1 set Suitable arrangement to receive incoming armoured XLPE aluminium cables. D.G. Incomer: Incoming: 1 No. of 250Amp 4P MCCB microprocessor release of 25 kA Breaking capacity with On Indicating Lamp with 2A SP MCB back-up. Set of Digital flush type class - 1 accuracy multifunction meters 0- 250A, showing V, A, PF, Hz, KW, KWH, KVAR, etc. with 3 Nos. cast resin current transformers of 250/5 Amp ratio, 15 VA Class 1 metering. 1 Set of three phase R,Y,B indicating lamps along with 2A SP MCB backup protection. All necessary Control MCB`S, control terminals and control wiring, interlocking etc. required with FRLS copper wires ISI marked complete as required. Under/ Over voltage, earth fault ,RPR relays along with current transformers of 250/5A ratio, 15 VA class-5P10 protection - 1 set Suitable arrangement to receive incoming armoured XLPE aluminium cables. Outgoings: 1 No. - 125 Amp. 25ka three pole thermal release, MCCB (Ics=lcu=Icw) with O/L, S/C and modular earth fault protection. Cap. Panel 2 Nos. - 160 Amp. 25ka four pole thermal release, MCCB (Ics=lcu=Icw) with O/L, S/C and modular earth fault protection. 1no.Badminton hall plus 1no. Spare 4 Nos. - 63 Amp. 25ka four pole thermal release, MCCB (Ics=lcu) with O/L, S/C and modular earth fault protection. 1no. Fire plus 1no. Exsiting building plus 1No. Plumbing plus 1no. Spare 3 Nos. -40 Amp. 25ka four pole thermal release, MCCB (Ics=lcu) with O/L, S/C and modular earth fault protection. 2nos. Exyernal light plus 1no. Spare Each outgoing breaker shall have the following accessories- Extended rotary operating mechanism, terminal extension spreaders, LED indication lamps with 2Amp control MCB for breaker `ON/OFF` for all MCCB`s. Necessary interlocking/ controlling etc. complete as required.

merry go round 4 seater 5dia main frame is m s sq pipe round pipe centrel pipe which further pipe supports with pipe ball bearing assembly chair made of molded frp plastic pu primer and pu paints

Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5`H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog and Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no Including Trans portion and Fixing and all type of taxes .

MULTIGRADE SAND FILTER (for Domestic ) Supply, installation, testing and commissioning of vertical self supporting Dual Media Filter (DMF) fabricated from FRP as per IS : 2825, ASMI code, complete with pressure gauges at inlet and outlet, sample cock, PVC face piping with ABS multiport valves and all accessories, with initial charge of filter media for Dual media filter with multi grade quartz sand and anthracite, lining inside with PP and FRP wounded outside, testing and commissioning complete. Capacity : 100 Lpm Filtration rate : 18-20 M³/M²/hr Max. operating pressure : 3.5 Kg/Sq.cm Test pressure : 5.5 Kg/Sq.cm Suggested Diameter : 1600 mm

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. 65 mm diameter pipes

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 100 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 150 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 50 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 65 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 80 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 40 mm dia

Providing and fixing 20 mm X 3 mm size of copper strip in 32 mm dia `B` class G.I. pipe from earth electrode as required

Providing and fixing 25 mm X 6 mm size of G.I. strip in 40 mm dia `B` class G.I. pipe from earth electrode as required

Providing and applying back coat sealer of approved make (as per drawing or as directed by project In charge)on back side and four edges of the stone and allowing it to cure for 24 hours before laying stone for flooring, application as per manufacture’s installation methodology. The sealer should be applied at the rate of 2 ltr per 150 sqft of surface area complete as per direction of Engineer in Charge.

Providing and applying High performance top coat sealer of approved make (as per drawing or as directed by project incharge) on the exposed surface on stone to form invisible barrier by allowing vapour to escape for resistance against water alklies, acid staining and freeze thaw damages. The sealer should be applied at the rate of 2 ltr per 285 sqft of surface area complete as per direction of Engineer in Charge.

Providing and fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 ` BSP bottom entry on Pump Delivery Line complete with Ball valve

Providing and fixing 6”-9” wide open saucer drain in all courts with all required provisions

Providing and fixing floor stop half dome with 50mm dia with fixing accessories, in satin stainless steel of approved quality

Providing and fixing (ABC Dry Chemical Powder ) type Fire Extinguisher of Capacity 6 kg Confirms to IS 15683, bearing ISI mark complete with brass forged squeeze grip type valve fitted with pressure gauge , pressurize with dry Nitrogen gas filled, with discharge nozzle with wall mounting bracket complete with internal charges. Capacity 6 Kg.

Providing and fixing 20mm X 3 mm copper strip on surface or in recess for connections etc, as required

Providing and fixing 25 mm X 6 mm G.I. strip on surface or in recess for connections etc, as required

Providing and fixing 4 layer synthetic floor court with all required items. All Complete as per Satisfaction of Engineer In Charge

Providing and fixing 4 layer synthetic floor over Basketball court with all required items. All Complete as per Satisfaction of Engineer In Charge

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing 9 layer synthetic floor(3mm) over volley ball court court with all required items. All Complete as per Satisfaction of Engineer In Charge

Providing and fixing brass Clean out Plug (COP) / Floor Cleanout (FCO) and manufacture with suitable insert keys for opening, male threaded joint with G.I. socket caulked to spun soil pipe including drip seal joint etc. per drawing complete as per approval of the Engineer-In-Charge. 100 mm dia

Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming to IS 15683, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. Capacity 4.5 kg

Providing and fixing Chain Swing - 2 seater ( Swing). Specifications Attached.

Providing and fixing Davis Cup Standard tennis Net Posts, as approved, per international Sports federation. Complete in all respectes as per Satisfaction of Engineer in charge.

Providing and fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. 100 mm dia

Providing and fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. 150 mm dia

Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).White sand stone

Providing and fixing fiberglass Geogrid Mesh applied over the concrete with elastomeric glue

Providing and fixing G.I. Inlet fitting with maximum 3 inlets 32,40 and 50 mm size fabricated from 100 mm dia G.I. pipes and welded G.I. sockets as per site locations, fixed to C.I. Trap and set with proper sealing compound as per drawing complete as per approval of the Engineer-In-Charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Exposed on Wall 65 mm dia nominal bore

Providing and Fixing G.I. Reducing elbow of 100 x 50 mm in cement concrete 1:2:4 at all levels for floor drains (excluding grating) for connection to floor traps in sunken portions, complete as per drawings and as per approval of the Engineer-In-Charge.

Providing and fixing Heavy Class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT. Size 100 mm X 100 mm

Providing and fixing in position 25 mm dia lawn hydrants consisting of 25 mm dia Ball valve, GI nipple and threaded hose receiver complete as required.

Providing and fixing in position CI grating over surface drain complete as required for the following sizes :- for 30 cm wide drain sleeve size 75cm x 60cm and 7cm thick

Providing and fixing in position Vane Type mechanical water flow meter for following pipe size : 50 mm dia

Providing and fixing international quality glass back wall, warranted for 5 years. 4 panels and one door of 12mm thick tempered glass with 4 fins, complete with fixtures and fittings. all provision like niche for door panels and 1 ½’ CC flooring outside the court, in case civil work (SQUASH SINGLES SINGLES)

Providing and fixing international quality glass back wall, warranted for 5 years. 4 panels and one door of 12mm thick tempered glass with 4 fins, complete with fixtures and fittings. all provision like niche for door panels and 1 ½’ CC flooring outside the court, in case civil work (SQUASH DOUBLES SINGLES)

Providing and fixing lever handle suit to 8mm follower with rosettes and escutcheon of approved quality with all necessary fixing accessories

Providing and fixing mortice sash lock with 45mm backset, 23mm square forend and 8mm follower with 72mm centers and prepared for euro profile cylinder including strike plate in SSS with latch bolt projection of 15mm and double bolt throw dead bolt of 18mm projection of approved quality with necessary screws.

Providing and fixing normal keys, 5 Pins Euro Profile cylinder with key to knob operation standard length 60mm in SS/ gold finish with 3 keys of approved quality with necessary screws and Master key .

Providing and fixing normal keys, Euro Profile half cylinder 45mm length of gold finish with 5 normal keys of approved quality with necessary screws.

Providing and fixing of designer Victorian steel sitting Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and Back rest 59” long total 12 Nos, is of MS rectangular pipe 65*25mm*14 Gauge complete with Epoxy Primer (INTERSEAL 670 HS) and PU finish (INTERTHANE 990) paints and INTERTHANE 1027 clear coat make Akzo Nobel India Ltd. (Protective coating Division) approx. weight of each Bench is 83 KG. The bench should have designer shade of different picture or design as approved by engineer in charge The rates are inclusive of all taxes like GST, transportation and Installation complete in all respect to full satisfaction of engineer-in-charge.

Providing and fixing of Fire Axe

Providing and Fixing of Premium 18mm Door Metal Locker Cupboard Storage Cabinet with Staple Locking |for School, Gym, Home, Office Employee Locker Box | (75 X 36 X 19 Inch Powder Coated, Light Grey), complete in all respects

Providing and fixing public information board consisting of 75 mm G.I. Pipe of size 2.45 metre x 1.15 metre with 900 mm x 900 mm G.I. Sheet 16 gauge connected/welded with 5 mm thick steel plate of 50 mm duly painted as per column mention in drawing and fixing at site in 60 x 60 x 75 cms cement concrete in 1:2:4 block complete in all respect

providing and fixing Pull Handle (425X 25) with Extended Spindle of Material-SS-304 of approved quality with all necessary fixing accessories

Providing and Fixing SS grating with frame and SS Screws casted heavy duty 125 mm dia including cutting and making good the walls and floors wherever required complete in all respects.

Providing and fixing Tower Bolt( 6`) -SS304 of approved make with all fixing accessories

Providing and fixing, testing and commissioning of C.P Copper connection 450 mm long including nuts and washers and making connection to fixtures and fittings complete as required.

Providing and Laying 9 layer synthetic floor(2.5mm) over tennis court with all required items. Complete as per satisfaction of engineer in charge

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 200 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 250 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 300 mm dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 450 mm dia

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 450 mm dia R.C.C pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 150 mm dia R.C.C pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 250 mm dia R.C.C pipe

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coal tar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm dia

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 nominal bore (class C)

Providing, fixing and testing and commissioning of GI pipes Class `C` (heavy duty) of approved make conforming to IS 1239-1982 complete with G.I. fittings such as tees, crosses, plugs, sockets, elbows, reducers, unions, sleeve pieces, check nuts etc including jointing with C.I. pipes (wherever required), cutting and making holes ,making good the walls, floors, R.C.C. work etc. including filling the same. (Pipe running pump room Level for drainage Sump pump Discharge header Pipe). 80 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 100 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 150 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 40 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 50 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 65 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 80 mm dia

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 90 mm OD

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 110 mm OD

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 40 mm OD

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 50 mm OD

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 63 mm OD

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 75 mm OD

Providing, fixing, testing and commissioning of C.P. brass single hole sink mixer with CP wall flange, swinging spout complete as required and making good.(15 mm nominal dia)

Providing, Fixing, testing and commissioning of shower including necessary wall chases and making good. With Single lever wall mixer with spout, adjustable OH shower with arm and wall flange complete with wall flange diverter assembly with Non-return Valves.

Providing, Fixing, testing and commissioning of two way CP brass Bib Cock with CP brass stop cock and ABS Health Faucet (complete with hook and flexible SS tube min. Length 1.0 m) as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings 150 mm dia pipe

Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. 150 mm dia

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required 300 mm dia

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: 200 mm diameter

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: 250 mm diameter

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete: 150 mm diameter

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm nominal bore (class C)

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm nominal bore (class C)

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm nominal bore (class C)

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be` made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix theequipment on to it and cover nuts and bolts with the baseplate cover, all complete as per direction

PUMPS Supply, assembly, erection, testing and commissioning of pumping system comprising the following: Vertical/ Horizontal centrifugal pumps with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) Pump Capacity 100 lpm, at 35 m head (1 Working plus 1 Stand-by) Filter Feed Pumps. (for Dom. Use)

PUMPS Supply, assembly, erection, testing and commissioning of pumping system comprising the following: Vertical/ Horizontal centrifugal pumps with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) Pump Capacity 100 lpm, at 35m head (1 Working plus 1 Stand-by) Garden Hydrant Pump.

REFRIGERANT PIPING WITH CABLE Supply, Installation, Testing and Commissioning including pressure testing as per specifications of copper refrigerant piping complete with all copper fittings for the split units along with connecting control/ power cable required for IDU to ODU. Piping associated with the units to be insulated with 13 mm thick closed cell elastomeric nitrile rubber insulation in tubing form as required. Piping along with connecting cable shall be laid on proper slotted angle trays and cost for the same shall be included. Cost of sealant to be included for sealing all refrigerant sleeves after installation of pipes with insulation and pressure testing. Pair of Hard copper refrigerant piping for Ductable type split unit. Price shall be inclusive of all fittings (elbows, bends, reducers etc.).

REFRIGERANT PIPING WITH CABLE Supply, Installation, Testing and Commissioning including pressure testing as per specifications of copper refrigerant piping complete with all copper fittings for the split units along with connecting control/ power cable required for IDU to ODU. Piping associated with the units to be insulated with 13 mm thick closed cell elastomeric nitrile rubber insulation in tubing form as required. Piping along with connecting cable shall be laid on proper slotted angle trays and cost for the same shall be included. Cost of sealant to be included for sealing all refrigerant sleeves after installation of pipes with insulation and pressure testing. Pair of soft copper refrigerant piping for 1.0 TR Hi wall type split unit. Price shall be inclusive of all fittings (elbows, bends, reducers etc.) along with required size of control/power cable.

Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipments to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate A.I complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

SITC weather proof M.S Door and glass fire door size 2100 mm x 900 mm or as per arch. Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - `a) Gunmetal single headed Hydrant valve - 1 No. b) Fire Hoses 63mm, 15 M long with accessories - 2 Nos. c) Short branch - 1 No. d) First Aid hose Reel - 1 No. e) Fire Extinguisher - 2 Nos. f) Fireman`s Axe - 1 No. g) Pressure Gauge - 1 No. The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.`

SUB HEAD - I - DG-Sets Providing, Installing, Testing and Commissioning of `Silent Type` Diesel Generating set having Prime Power Continuous Rated 140 KVA` 415 volts at 1500 RPM, 0.8 lagging power factor at 433 V suitable for 50 HZ, 3 phase system and consisting of the followings: Diesel Engine Diesel engine 4 stroke with water radiator cooled , electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 1500 RPM suitable for above output of alternator at 40 Degree C, 50%RH and at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories Engine mounted Instrument Panel fitted with and having the for following: Start-Stop switch with key Battery charging indication RPM indication Over speed indication Low lub. Oil trip indication Engine Hours indication Alternator: Alternator shall be self excited, self regulated, self ventilated in brushless design rated at 140 KVA, 415 volts at 1500 RPM, 3 phase 50 HZ, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH and at 1000 Meter MSL. The alternator shall be suitably derated to give continuous output of 140KVA at 40 degree C. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-regulated through AVR conforming to BS: 2613 or BS: 5000 and with class F or better insulation. Base Frame and Foundation: Both the engine (Built in Diesel Tank 290 ltr). and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendation of manufacturer. Fuel Piping: Fuel piping between fuel tank and diesel engine with MS class `C` pipes of suitable dia. Complete with valves, level indication and accessories as required as per specifications. Exhaust System: Dry exhaust manifold of suitable dia, welded black MS B Class pipe confirming to IS:3589 cut to required lengths max. 2 meters and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral wool/Rockwool 50mm thick, wire mesh stainless steel exhaust flexible below and aluminium cladding etc. as required as per specifications with residential type exhaust silencer and catalytic convertor. Starting System: 24V DC Starting system comprising of starter motors: Voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 Plates, 160 Amp. Hour capacity lead acid type) as required as per specification. 1 No. of 250 Amp. Rating, spring charged 4 pole MCCB , complete with metering, indications and relays/releases as required.

Supply and fixing of following GI strip/ wire including all necessary fixing accessories and effecting connections as required and approved by the Engineer Incharge. 25 x 3 mm GI strip

Supply and laying of 125 micron thick imperble plastic sheet of make IPCL, Shivalik or equivalent make, over the surface of DLC/ M10 Complete in all respects as per entire satisfaction of engineer in charge

Supply installation testing and commissioning of 43`` Full HD (1920X1080p) LED professional monitor 24x7 Display with all HDMI input, USB, audio input/output, control, RJ -45 Ethernet, inbuilt speaker etc. and necessary accessories, VGA and HDMI Connectivity complete etc. as reqd. Make :Panasonic/Samsung/LG

Supply Installation, testing and commissioning of following fittings/ luminaires/ ceiling fans complete with necessary starter/s and copper wound/ electronic ballasts, capacitors, lamps, louvers and all other accessories, down rods of suitable length, connections with 1.5 sq.mm. PVC insulated FRLS, copper conductor, single core cable including loop earthing with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable etc. complete as required. 1X25W BRACKET LIGHT

Supply Installation, testing and commissioning of following fittings/ luminaires/ ceiling fans complete with necessary starter/s and copper wound/ electronic ballasts, capacitors, lamps, louvers and all other accessories, down rods of suitable length, connections with 1.5 sq.mm. PVC insulated FRLS, copper conductor, single core cable including loop earthing with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable etc. complete as required. 20W LED SURFACE MOUNTED LIGHT

Supply Installation, testing and commissioning of following fittings/ luminaires/ ceiling fans complete with necessary starter/s and copper wound/ electronic ballasts, capacitors, lamps, louvers and all other accessories, down rods of suitable length, connections with 1.5 sq.mm. PVC insulated FRLS, copper conductor, single core cable including loop earthing with 1.5 sq mm FRLS PVC insulated copper conductor, single core cable etc. complete as required. Supply of IP20, 21W, 5700K Surface mounted LED downlighter with System Lumen Output 2200 lm. Luminaire shall have Spun aluminium housing and spun CRCA sheet steel mounting plate, white powder coated after phosphochromate treatment. Luminaire shall have High efficiency long life LED package in integral module with lumen efficacy of )140 lm/W and viewing angle of 120° to ensure better uniformity. Luminaire shall have The circular housing white painted inside also act as reflector. The luminaire shall have High quality methacrylate opal diffuser and CRCA white powder coated outer ring to give glare free uniform light distribution. Luminaire shall have Built-In Potted electronic LED driver with APFC, lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection and other safety test as per IS 15885 Part-2/Sec 13, IEC60598-1. Luminaire shall have Operating temperature: -10 °C to plus 45 °C, Operating voltage range: 140 V - 270 V, Average life L70B50: 50000 hours.Power Factor 0.9, THD (%)(=10, CRI=80. Havells ENDURA NEOHE SURFACED LS21W LED 857S, ENDO, LT

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3-½ x 185 Sq.mm.

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3 x 4 Sq.mm. copper

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3 x 6 Sq.mm. copper

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3-½ x 120 Sq.mm.

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3-½ x 35 Sq.mm.

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3-½ x 50 Sq.mm.

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 3-½ x 70 Sq.mm.

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 4 x 10 Sq.mm. copper

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 4 x 16 Sq.mm. copper

Supply of following sizes of PVC sheathed LT XLPE armoured, aluminium/copper 1.1KV grade, as required of the following sizes. 4 x 6 Sq.mm. copper

Supply of IP20 Aesthetically designed 34W 5700K 4x1 LED flat panel for surface mounting with System Lumen Output 3740 lm. Luminaire shall have CRCA powder coated white after phosphochromate treatment. Luminaire shall have High transmittance polystyrene opal diffuser for glare free symmetric light distribution. Luminaire shall have High efficiency long life LED package in integral module with lumen efficacy of )140 lm/W and viewing angle of 120° to ensure better uniformity. Luminaire shall have Powered by built-in Isolated, SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection and other reliability test as per IS:15885 Part 2/Sec 13. Operating temperature: -10 °C to plus 40 °C, Operating voltage range: 140 V - 270 V, Average life L70B50: 50000 hours. Power Factor 0.95 and THD(10. CRI=80. Havells PLUTOSURFACE4X1PLS34WLED857S, ENDO, LT

Supply of IP66, IK07 120 W 5700K NB LED Floodlight with System Lumen Output 13800 lm. Luminaire shall have Epoxy powder coated Pressure die cast aluminium housing in grey finish with aesthetically designed heat sink for efficient thermal management, sturdiness and excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout. Floodlight shall have High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED )140 lm/W and viewing angle of 120° to ensure better uniformity. Floodlight shall have PC Lens with Narrow/Wide beam light distribution and Toughened glass fixed to housing with 06 Nos screws. Luminaire shall have Built-in potted, electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with built In SPD and other safety test as per IS 15885 Part-2/Sec 13. Operating temperature: -10 °C to plus 45 °C, Operating voltage range: 140 V - 270 V, Average life L70B50: 50000 hours. Luminaire shall have Power Factor)=0.95 and THD(=10, CRI)=70. Havells JETAIRISFL120WLED757ARNBLTG, ENDO, LT

Supply of IP66, IK07, 5700K, 400 W Floodlight with System Lumen Output of 40000 lm. The luminaire shall have Pressure die-cast aluminium housing (heat sink) for efficient thermal management, sturdiness and excellent corrosion resistance. SS Hardwares, silicon gasket for maintaining ingress protection. The luminaire shall have High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED )145 lm/W and viewing angle of 120° to ensure better uniformity. Luminaire shall have UV Stablized narrow/wide beam distribution polycarbonate lens. Tempered protective toughened glass 4 mm, thermal shock and impact resistant (IK-07) fixed to the housing with aluminium frame and SS screws. The floodlight shall have Built-In IP 67 Potted, electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection and other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15 complied. Operating temperature: -10 °C to plus 45 °C, Operating voltage range: 140 V - 270 V, Average life L70B50: 50000 hours, Surge Protection: 10kV with built-in SPD. Power Factor=0.95 and THD=10%, CRI=70...Havells JETAVALOURLEFL400W3MLED757PINTNMBLTG, ENDO, LT

Supply, Installation and Testing of collar damper of galvanised steel sheet, provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of air distribution as per approved shop floor drawings and specifications.

Supply, assembly and laying of under floor trunking made out of 1.6mm thick GI sheet complete with jointing sleeve, horizontal bends, floor junction box, vertical bends, level adjustment components and closer, vertical elbow, covers, access outlet. etc. complete with all other accessories under floor installation including cutting and chasing the floor/ or on surface, making good the same, placing in position and cleaning from inside complete etc. as required. 100 mm x 38 mm (2 compartment)

Supply, assembly and laying of under floor trunking made out of 1.6mm thick GI sheet complete with jointing sleeve, horizontal bends, floor junction box, vertical bends, level adjustment components and closer, vertical elbow, covers, access outlet. etc. complete with all other accessories under floor installation including cutting and chasing the floor/ or on surface, making good the same, placing in position and cleaning from inside complete etc. as required. 150 mm x 38 mm (2 compartment)

Supply, assembly and laying of under floor trunking made out of 1.6mm thick GI sheet complete with jointing sleeve, horizontal bends, floor junction box, vertical bends, level adjustment components and closer, vertical elbow, covers, access outlet. etc. complete with all other accessories under floor installation including cutting and chasing the floor/ or on surface, making good the same, placing in position and cleaning from inside complete etc. as required. 250 mm x 38 mm (3 compartment)

Supply, assembly and laying of under floor trunking made out of 1.6mm thick GI sheet complete with jointing sleeve, horizontal bends, floor junction box, vertical bends, level adjustment components and closer, vertical elbow, covers, access outlet. etc. complete with all other accessories under floor installation including cutting and chasing the floor/ or on surface, making good the same, placing in position and cleaning from inside complete etc. as required. 50 mm x 38 mm (1 compartment)

Supply, assembly, erection, testing and commissioning of SS / CI submersible non-clog pumps, suitable to handle basement drainage having the following capacities with vortex impeller / grinder type, complete with 3 phase squirrel cage submersible motor of required HP for 415 ± 10% volts, 3 phase, 50 Hz. A.C. supply cooled by surrounding liquid, submersible cable upto main panel within the plant room, dry running preventor, G.I. guide pulling chain, all the necessary piping and accessories, valves, delivery header etc. as required complete in all respects. The rate will include electrical panel with cyclic operation as supplied by the manufacturers) The above installation shall be complete with sump pump lifting assembly, ready made electro – galvanized MS lifting chain, GI pipe header complete with discharge manifold, flanges, tee, elbow etc. complete including GI pipe upto the top of sump and including GI union. Header shall be sized for both pump working under delivery velocity of 1.5 m/sec. Capacity of 250 lpm against a total head of 18 m (solid handling 10-12 mm) ( pump room Drainage sump) (1 Working plus 1 Stand by) (SS / CI Body and SS / CI Impeller and shaft)

Supply, Installation ,Testing and Commissioning of 1/ 2.8” CMOS, PAL/ NTSC, Color:0.001 [email protected],BW 0 lux with IR, Shutter Speed 1s – 1/100000s, Triple Stream Supported, IR Cut Filter with Auto Switch, 140dB, Optical Zoom 25x Digital Zoom 16x, Pan Range 360°, Pan Manual Speed:0.1°/s-200°/s: Pan Preset Speed 240°/s, Tilt Manual Speed:0.1°/s-120°/s: Tilt Preset Speed:180°/s, IR Range Up to 150m, H.265/H.264/M-JPEG, Built-in 1/1 alarm in/out, 6 Piece IR Array LEDs,Lightning Protection, and Surge ProtectionMotion Detection, Network Disable Alarm, IP Conflict, MAC Conflict Detection, BLC/3D DNR/HLC, DC 12V/POE, CE, FCC, IP66/67, BIS, IK10, UL Micro SD support. with all mounting accessories. Make :- Bosch/ Axis/Panasonic/Avigilon/ Pelco/Honeywell/Matrix

Supply, Installation ,Testing and Commissioning of IP Camera Bullet ½.8` Progressive Scan, Backlight illuminated CMOS Sensor 5 Megapixel (2592 x 1944) H.265 and H.264 Four – stream encoding Shutter speed 1/15s-1/100000s, WDR(120dB), Day/Night Camera Switching , Motion detection, View Tamper Detection, Tripwire detection, object Intrusion, 2 DNR, 3 DNRAWB, AGC, BLC 4mm fixed lens, IR Range of 50 Mtrs, POE (802.3af/at), 12 V 2A, SD Card. UL,CE, FCC, EN/IEC, IP66, IK10,BIS. complete as per specifications as required plus B5 Make :- Bosch/ Axis/Panasonic/Avigilon/ Pelco/Honeywell/Matrix

Supply, installation, testing of extruded aluminium powder coated linear grill without volume control damper as per drawings.

Supply, installation, testing and commisioning of cable termination of above cables with copper lugs and flameproof brass compression glands on both the ends with inhibting compound etc. complete as required. 3 X 4 sq. mm (25mm)

Supply, installation, testing and commisioning of cable termination of above cables with copper lugs and flameproof brass compression glands on both the ends with inhibting compound etc. complete as required. 3 X 6 sq. mm (19mm)

Supply, installation, testing and commisioning of cable termination of above cables with copper lugs and flameproof brass compression glands on both the ends with inhibting compound etc. complete as required. 4 X 6 sq. mm (25mm)

Supply, Installation, Testing and Commissioning of 45 Watt Solar Street Light luminaire with inbuilt SCC made IP66 and with MPPT (Maximum Power Point Tracking) which provides about 25% more charging efficiency by utilizing maximum energy harvested by solar PV modules. System should designed to withstand highly corrosive atmosphere and heavy wind loads. The modules are certified for industry standards IEC61215, IEC61730 (safety class 1 and 11), IEC61701 along with 8 Mtr. octagonal pole with 200 (100x2) AH lead acid battery and 240 (120x2) Wp solar panel Total lumen output should not less than 6300 lumen Complete with all Accessories and Control Gears etc.

Supply, Installation, testing and commissioning of pressure switches for Hydrant / Diesel Engine Driven Pump / Jockey Pumps, diaphragm type, adjustable range from 0-9 bar and a regulation range of 0.1 - 1.5 bar direct mounted SNAP acting type made from die cast aluminium with epoxy powder coated finish and SS316 diaphragm and other wetted parts, including necessary wiring upto control panel and other materials as required as per specifications.

Supply, installation, testing and commissioning of tanker inlet connection complete with 80 mm dia GI inlet piping, hose inlet connection, MS cabinet enclosure (epoxy painted after fabrication), pad locking arrangement, inlet flexible hose complete with all necessary arrangement.

Supply, Installation, Testing and commissioning of wall hanging drinking online water cooler with bottle filler facility, made by stainless steel top and heavy duty galvanized steel frame. With cooling capacity, ADA Compliant, size 472 mm Depth X 447mm width, flexible bubbler guard , operated between 50 to 120 PSI, Chiller unit Suitable to R134a Refrigerant, Adjustable thermostat control, suitable for 220-230v/50-60 hz A/C Supply Complete with all accessories which include MD-CU29, which is an EPA registered antimicrobial copper that fights off microorganisms which include MRSA and e-coli. The water Fountain shall possess NSF-USA, Green building, energy star saving certification, and to be placed at different location of buidling. Agency has to execute all civil work for installing the Water Fountain for proper functioning and aesthetic view as directed by the engineer-in-charge without any extra cost. WITH 50 LPH RO System with 60 ltr HTP Storage tank

Supply, installation, testing, commissioning of Wall Mount - 12U - 600W - 500D - Double Fan Provision - Pastal Fine Tex. Single Fan For WallMount, Metal Cable Manager - 01U - Plastic Cable Loop`s Mountable - Black Fine Tex. - Assembly, Power Distribution Unit - 06 Amp Universal - 06 Socket - 16 Amp Switch with Indicator - 06 Amp Fuse - 06 Amp 3 Pin Plug with Power Cable 0.75 sq.mm 1.5 meter Length - Black Fine Tex. - Assembly, Mounting Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set. complete as per specifications as required Make :Rittal/APC/ Legrand/Panduit

Supply, installation, testing, commissioning of 6U outdoor rack IP54 A, Filter with Fan , Filter with Hood, Canopy, Gland cover Plate, Metal Cable Manager - 01U - Plastic Cable Loop`s Mountable - Black Fine Tex. - Assembly, Power Distribution Unit - 06 Amp Universal - 06 Socket - 16 Amp Switch with Indicator - 06 Amp Fuse - 06 Amp 3 Pin Plug with Power Cable 0.75 sq.mm 1.5 meter Length - Black Fine Tex. - Assembly, Mounting Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set Make :Rittal/APC/ Legrand/Panduit

Supply, installation, testing, commissioning of 8 Port GiGA POE Switch with 2 SFP Module (120W) Make :-Cisco/Netgear/D-LINK/ AECONNECT

Supply, installation, testing, commissioning of hard disk for NVRS – 8TB Hard Disk Sata Make :- WD/Seagate

Supply, installation, testing, commissioning of Power backup Device 3KVA pure sinwave Online UPS with 30 minutes Backup time 2400VAH, single phase with ground 3000VA/2400W, Nominal voltage 200/208220/230/240VAC. Input voltage range 140VAC or 160-280 VAC (based on load at 100%), output voltage 200/208/220/230/240 VAC, frequency range 47-53 Hz or 57-63 Hz with power Cabling and accessories Make :Pegasus/Emerson/APC/Numeric/Hitachi

Supply, installation, testing, commissioning of Wall Mount - 06U - 600W - 500D - Double Fan Provision - Pastal Fine Tex., Single Fan For WallMount, Metal Cable Manager - 01U - Plastic Cable Loop`s Mountable - Black Fine Tex. - Assembly, Power Distribution Unit - 06 Amp Universal - 06 Socket - 16 Amp Switch with Indicator - 06 Amp Fuse - 06 Amp 3 Pin Plug with Power Cable 0.75 sq.mm 1.5 meter Length - Black Fine Tex. - Assembly, Mounting Hardware Packet { Containg 1 Nos Each Of 3 } - 20 Set complete as per specifications as required Make : Rittal/APC/ Legrand/Panduit

Supplying and drawing co-axial TV cable following grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. RG-11

Supplying and drawing co-axial TV cable following grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. RG-6

Supplying and drawing of 4-pair Unshielded twisted pair with a cross filler ( plus ), meeting Category 6 standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke and Zero-Halogen as per IEC 60332-1, IEC 61034-2 and IEC 60754-1 respectively. in the existing surface/ recessed steel /PVC conduit as required. Make :- Systimax/Panduit/ Legrand

Supplying and drawing of 2 core 1.5 sqmm cable in the existing surface/ recessed steel /PVC conduit as required.

Supplying and drawing of OS1, OS2 Single mode Loose tube Outdoor / Corrugated steel tape – 6 Core Fiber, Attenuation: (of cable with fibres) - IEC 60793-1-40, Armouring: 0.15 mm corrugated steel tape, Sheath: Should be 1.5 mm black MDPE (Drop resistance and shock resistance, less sensitive and higher stress -cracking resistance) sheath, IEC 60811, IEC 60708 in the existing surface/ recessed steel /PVC conduit with all accessories etc. as required. Make :- Systimax/Panduit/ Legrand

Supplying and fixing Fire Brigade Connection of CI body with Gun Metal male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required of following way : 2 Way (for Drawout )

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Providing and fixing of standard short size GM branch pipe with nozzle of 20mm nomnal bor outlet with instaneous type 63 mm dia coupling complete IS marked and TAC approved.

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia male and female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 (type-A) as required.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Supplying and fixing First Aid Box of 18 S.W.G. M.S sheet,painted as approved and prescribed by Indian Red Cross Society and as per attached specifications.

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 30 m

Supplying and fixing of caution Boards of 16 S.W.G. , M.S. sheet of 300 mm x 150mm size, duly painted and having `MAN ON LINE` and `DO NOT SWITCH ON` written in Red complete with hanging arrangement as required.

Supplying and fixing of fire buckets 5 Nos.in each set of approved quality, red painted from outside and white from inside conforming to IS : 2546/1974 with additional handle at the bottom, filled with fine sand and fixed on an angle iron frame including MS pedestal stand suitable for supporting five buckets as per the requirement of local authorities.

Supplying and Fixing of following dia M.S. Pipe with all accessories for DG Exhaust as per relevant IS:3589 including LRV rock wool insulation having 100 kg per m3 density 75 mm thick for 450/350 mm , chicken wire mesh and cladding with 24 gauge aluminium sheet, for exhaust of smoke of D.G. Sets including fixing the M.S. cladded pipes on the existing structure (including fixing of silencers, flexible bellows to be supplied by the owner as part of standard D.G. Supply) on the wall/ ceiling including cutting, welding primer coating and painting cost of suitable sizes of angle iron / MS channels supports along with a wall etc. complete as required 125 mm dia x 4.85 mm nominal thick

Supplying and fixing of following sizes of medium class HDPE along with accessories in surface/underground including cutting the wall/road and making good the same in case of recessed conduit as required. (a) 32 mm in existing surface/ recessed steel /PVC conduit as required. Make :-Sudhakar /Reliance/ ISI Mark

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 25 mm Make :-AKG/Precision/PCG/Atul/ Anchor

Supplying and fixing of powder coated extruded aluminum Return/Exhaust Air Grills with louvers but without volume control dampers complete as required.

Supplying and fixing of powder coated extruded aluminum Supply Air Grills with aluminum volume control dampers as per specifications.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated pre-painted M.S. cable trays Tee`s with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm. Width x 50mm. Depth x 2.0 mm. Thickness.

Supplying and installing following size of perforated pre-painted M.S. cable trays Tee`s with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Supplying and installing following size of perforated pre-painted powder coated GI cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 300 mm. Width x 50mm. Depth x 2.0 mm. Thickness.

Supplying and installing following size of perforated pre-painted powder coated GI cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts, painting suspenders etc as required. 150 mm. Width x 50mm. Depth x 1.6mm. Thickness.

Supplying and laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring and LSZH outer sheath complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 20 sq. mm (42mm)

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 3½ X 35 sq. mm (32mm)

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 3½ X 50 sq. mm (35mm)

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 3½ X 70 sq. mm (38mm)

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 4 X 10 sq. mm (25mm)

Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 4 X 16 sq. mm (28mm)

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. 3½ X 185 sq. mm (45mm)

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 150 to 185 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 150 to 185 sqmm

Supplying of following size of Al conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per technical specifications 3Cx150 sq.mm. XLPE insulated Al. Ar. Cable

Supplying, assembly, erection, testing and commissioning of magnetic level sensors and controllers, CPVC probe tube, PP actuating float and all other equipment required for the performance of the system to the satisfaction of the engineer in charge complete including providing and fixing wiring from control junction box near the UG tank to probes of required length, interconnection wiring between level controller and the concerned contactor in the starter panel as required. The level controller will perform the following functions. To switch on the pumps (including raw water pumps (Domestic Water Treatment, Softening Plant etc.) when the level of water in the supply water tank is low and to cut off the pump when the level in the receiving water tank is high and switch off the pumps when the level of water in the supply water tank is low. To indicate 5 levels of water in all tanks through a control panel with LEDs To start the pumps in a cyclic order. The system shall be complete to ensure automatic quotation of pump in accordance to water level in respective tanks. The Contractor will include all the under ground and over head tanks and all the pumps as required for level control in this item

Supplying, erection, testing and commissioning of following tap off / splitter as per specification in 1.6 mm thick CRCA sheet steel enclosure for CATV system. 4 Way splitter box

Supplying, fixing and testing of approved make of integral type bollard cyclindrical shape housing cast aluminium dome shape top cover fixed with cylindrical shape poly carbonate cover having base plate with holes for direct mounting complete with all accessories and control gear box (with 1x 10watt LED lamp) including preparatoion of foundation including fixing with connection and all required material as require

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring and removable core.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring and removable core.

Supplying, fixing, testing and commissioning of following capacity Ductable split air-conditioning unit suitable to operate from 415 plus 10% volt, 50 Hz, 3 phase power supply, with air-cooled evaporator with coil, fan, and fan motor, air-cooled condenser with Inverter compressor (with R-410a/R-32/R-134a) including first charges of gas, condenser coil, propeller fans controls, inter connection control panel. Compressor should be protected with inbuilt thermal protector, internal pressure reflief valve, high pressure cutout and low pressure cutout. Refrigerant pipe size and gas quantity should suit to the copper pipe length at actual. Necessary supporting arrangement for indoor unit, M.S. frame duly Powder Coated/ Epoxy painted as per approved shade by architect to locate Outdoor Unit with necessary vibration isolation arrangement as per site condition etc.The capacity guarantee should be ensured by the vendor. The minimum EER value of the units should be as per ECBC-2017. 4.0 TR

Supplying, installation, testing and commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc. complete as required

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for n closure, horiziontal foot mounted type with Class-`F` insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head

Supplying, Installation, testing and commissioning of following sizes of 0.5 mm dia annealed tinned copper conductor PVC insulated and PVC sheathed unarmoured telephone cable on surface/ existing cable tray complete as required. 10 Pair

Supplying, Installation, testing and commissioning of following sizes of 0.5 mm dia annealed tinned copper conductor PVC insulated and PVC sheathed unarmoured telephone cable on surface/ existing cable tray complete as required. 100 Pair

Supplying, Installation, testing and commissioning of following sizes of telephone distribution board in M.S. hinged type box duly painted complete with Krone type tag block etc. including terminations of cable as required. 10 Pair

Supplying, Installation, testing and commissioning of following sizes of telephone distribution board in M.S. hinged type box duly painted complete with Krone type tag block etc. including terminations of cable as required. 100 Pair

Supplying, installation, testing and commissioning of Indoor type floor mounted matel clad, 11KV VCB Panel made up of 2.5 mm thick CRCA Sheet with 2Nos. VCB,s (1 Incoming plus 1 outgoings) totally enclosed and fully interlocked horizental isolation, draw out type breaker as per IS 13118, as amended up to date and as per additional specifications, having capacities as mentioned below, single break trip free mechanism, manually charged and manullay closing breaker suitable for use on 11KV, 3-Phase, 50 Hz A.C. supply with short circuit fault level of 350 MVA, complete with self contained fully interlocked, rack out mechanism, air insulated but encapsulated copper bus bar of 630 Amp, capacity , breaker featured with mechanical ON/OF indicator with hand trip device, spring release coil shunt trip coil and auxiliary switch of 4 NO plus 4 NC and equipped with following switchgear and accessories i/c connections suitable for 3C x 50 Sq. mm, XLPE 11 KV grade cable (cable entry from bottom), end terminations with heat shrinkable jointing material etc. as required other details shall be as per Technical Specification and SLD. (Extra NO and NC shall be provided through multiplication relay OR through auxiliary contactor). Incoming :- 1Nos. 11 KV, 630 A, VCB , 350 MVA , 18.4 KA for 1 sec. Spring charging Motor voltage 230 V AC tripping /closing coil voltage, 24 /30V/110V DC Current Transformers 3 Nos. - 50/5/5, Core I - 15VA, CL. 1.0 (CT-1) 3 Nos. - 50/5/5, Core II - 15VA, 5P10 (CT-2) Breaker operated auxiliary switch N/O and N/C 1 No. Cast resin type Single Phase PT 11kV /v3 / 110Vv3 , 100 VA , C1.1 Ammeter ( 0-150 Amp) with ASS (96 sqmm) Voltmeter (96 sq.mm) plus VSS 2xO/C plus 1xE/F Relay type CDG 31 O/C 50%-200%, E/F 20-80% Master Trip Relay VAJH 13 Trip circuit supervision relay –VAX-31 IDMT Relay Control Switch (TNC) Lamps (ON/OFF/ TCH/ Auto trip/ RYB Indication) Spring charged electrical indication lamp. Hooter Trivector meter Emergency push button 1 No. Surge suppressor as per standard fitment of panel manufacturer. 1 No. Grid phase relay to indicate correct phase sequance and trip incoming supply in case of phase reversal. All metering and protection devices, interconnections, necssary control wiring, cabling and all other accessories shall be provided as required as per specifications and technical particulars. Outgoings:- 1Nos. 11 KV, 630 A, VCB , 350 MVA , 18.4 KA for 1 sec. Current Transformers 3 Nos. - 100/5/5, Core I - 15VA, CL. 1.0 CT 3 Nos. - 100/5/5, Core II - 15VA, 5P10 CT Breaker operated auxiliary switch N/O and N/C 2 Nos. Auxillary relay for transformer IDMT Relay 2xO/C plus 1xE/F Relay type CDG 31 O/C 50%-200%, E/F 20-80% Ammeter ( 0-150 Amp) with ASS (96 sqmm) Voltmeter (96 sq.mm) plus VSS Master Trip Relay VAJH 13 Trip circuit supervision relay –VAX-31 Control Switch (TNC) Lamps (ON/OFF/ TCH/ Auto trip/ RYB Indication) Spring charged electrical indication lamp. Emergency push button All metering and protection devices, interconnections, necssary control wiring, cabling and all other accessories shall be provided as required as per specifications and technical particulars. Power pack unit SITC of power pack with 220V AC input and 24V DC continuous output suitable for closing / tripping / indication of HT panel boards with 2 nos. 12V each maintenance free batteries ofsuitable of 100AH each, charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of Ammeter and Voltmeter including connections with 2.5 Sq. mm FR PVC insulated copper conductor cable etc as required.

Supplying, installation, testing and commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain and hammer assembly complete with glass and push button etc. as required.

Supplying, Installation, testing and commissioning of Supplying and Fixing of Fiber Optic LC to SC style Patch Cord fiber complete as per specifications as required Make :- Systimax/Panduit/ Legrand

Supplying, Installation, testing and commissioning of Supplying and Fixing of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19` Rack Mount ,Shall have all accessories including coupler plates pre loaded with 24 Nos of LC couplers SM with all accessories complete in all respect. Pigtails Should Complie to ITU-G657.B-Bend insestive fiber complete as per specifications as required Make :- Systimax/Panduit/ Legrand

Supplying, installation, testing and commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob and speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

The Frogg Hard Plaster system for the walls consists of cement based plaster with chemical modifiers, fine graded sand, fiberglass and resins. The plaster is 25mm thick and assumes a level brick wall. The front wall bears the maximum impact so is under laid with chicken mesh and finally coated with a epoxy based cement putty. This ensures a crack free, hard and even playing surface which is resistant to breakage, flaking and cracks. The walls are finished with a primer and two coats of high quality washable oil based acrylic paint. The walls above the playing area are covered with normal plaster and paint, which the client will provide in case civil work is carried out by them: we would require plain brick wall for the playing area. If the wall is uneven then more material may be required and the cost will go up.

TRANSFORMER (11KV/.433KV,160 KVA) `Supply, installation, testing and commissioning of 160 kVA, 11/.433 volts Deta/Star, vector group DYN11, outdoor mounting, oil cooled, ONAN transformer with OFF Load Tap Changers having suitable for incoming voltage variation of plus 5% to –15% in steps to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz oil temperature alarm/trip protection in LV chamber complete as per specifications and as required. The transformer shall be provided with arrangement to terminate XLPE cable on HT side and to connect Cable on LT side, complete as required. The losses of the Transformer should be as per latest ECBC guideline.As per Latest IS:1180 and Transformer efficiency type -2. Necessary items as required to form part of transformer. % Impedance : 5% ( Subj. to IS Tol.) Temp. Rise : 40/45 Deg C ( Oil/Winding)` The above transformer shall have losses as per ECBC compliant. The acceptable tolerances in regard to transformer shall be as per relevant IS Code.

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mmb make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary

Bidder Name

Amount

Ashok Kumar Garg(GSTN-06ABTPG1118P1ZC)

M/s Tech Sphere Infrastructures(GSTN-06AQAPS2700D2ZE)

Sanjay Kumar, Contractor(GSTN-NA)

M / S DAYANAND CONTRACTOR(GSTN-NA)

Ashok Kumar Garg

Sanjay Kumar, Contractor

M / S DAYANAND CONTRACTOR

M/s Tech Sphere Infrastructures

Sanjay Kumar, Contractor

M / S DAYANAND CONTRACTOR