REPAIR MAINTENANCE OF EXTERNAL BR NATURE WORK PLASTERING PLUMBING SANITARY FITTINGS AND PLINTH PROTECTION, ROOF POINTING SERVICE WATER TANK STAGING IN MD ACCN OF FODDER LINE CMP LINE CAPT LINE ORS BUTCHERY IN THE AREA OF AGE BR II UNDER G

Amount

Removal of Vegetation from approachable/unapproachable roof of block and surrounding walls by cutting shrubs, wild growth/tree not exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick walls and making good the disturbed surface with PCC 1:2:4 type B-0 or CM 1:3 as directed and disposing the rubbish beyond MD land complete all as specified and directed

M&L Raking out joints/pointing to brick or brick tiles, laid flat, in floors, surface channels, roofs, etc and including flush pointing to brick tile laid flat or brick tiles in pavings in cleaning and joints grouted flush in cement mortar 1:3 mixed with 5% cruide oil by weight of cement, complete all as directed and specified.

M&L PCC 1:2:4 type B0 (12.5 mm graded stone agg) as in roof padding etc complete all as specified and directed.

M&L for 40mm thick brick tiles terracing over and including bedding layer of cement mortar 1:6, 15mm thick, including jointed and grouted in cement mortar 1:6, flush pointing in cement mortar 1:3 mixed with 5% of crude oil by weight of cement and including dismantling of old brick tiles as on roof including removal of rubbish beyond MOD land complete all as specified and directed.

All as item No 4 but Except tiles

Demolition of cement concrete (unreinforced) in ground floor/sunken floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra etc complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and directed.

M&L 60 mm thick coloured cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade, laid dry including 50 mm thick sand cushing & vibrating the pavers and joints filled with dry sand including dismantling of old paver block complete all as specified and directed .

M&L for Coloured Machine pressed cement concrete chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment over 20 mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for sunken treatment as following over it complete all as specified and as directed:- (a) Rendering 10 mm thiick in CM 1:4, (b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures's instruction, surface finished even and smooth (c) Applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane

M&L for PCC 1:5:10 type E-2 (40 mm graded stone agg) as in sunken floors complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed.

S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 ( 20 mm graded stone aggre) as floors finishing surfaces even and smooth using extra cement.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm dia bore incl cutting chases if whereas required and including of taking down G I tubing complete all as specified and directed.

All as per item 17 but except pipes.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia bore incl cutting chases if whereas required and including of taking down G I tubing complete all as specified and directed.

All as per item 19 but except pipes.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed.

All as per item 21 but except pipes.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/trenches or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and directed.

All as per item 24 but 100mm bore

S&F CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and directed.

S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and directed.

All as per item No 27 above but 75mm bore.

Disconnecting exsiting water storage tanks of capacity exc 250ltr and n exc 500 ltr, removal of unusable tank from site complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. with necessary chemical / bleaching powder, capacity upto 500 ltrs including refixing in position complete all as specified and directed.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed.

S&F in repairs 20mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed

S&F in repair cover suitable for 500ltr capacity water storage tank complete all as specified and directed.

M&L for reinforced cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and including formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete and including demolition of reinforced cement concrete as in chajja, kitchen slab, chullah hood, chimney portion, manhole cover and similar work n.exc 15cm thick and removal of rubbish beyond MOD land complete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding and including dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

S&F with 3mm thick ordinary sheet glass fixed with beads fixed with metal panel pins clips complete in squares not exc 0.50 sqm each pane including hacking out old broken glass from any type of frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc including taking down cement plaster/grit plaster/rough cast plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 and including demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.

All as per srl item No 39 above but except brick.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L preparation of surfaces and applying two coats of cement base paint over a coat of primer on external surfaces of walls complete all as specified and directed.

M&L applying two coats of cement base paint over a coat of primer on walls and including complete removal of existing treatment and preparing the surface with sand papering of surface with the help of mechanized sanders (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) etc complete all as specified and directed.

M&L applying two coats of oil bound distemper over a coat of primer on wall/ceiling and including applying wall care putty not more than 1mm thick on wall / ceiling even and smooth surface including complete removal of existing treatment and preparing the surface with sand papering of surface with the help of mechanized sanders (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) etc complete all as specified and directed.

M&L applying two coats of oil bound distemper over a coat of primer on wall/ceiling and including complete removal of existing treatment and preparing the surface with sand papering of surface with the help of mechanized sanders (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) etc complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) finished even & fair on brick/concrete surfaces including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.

M&L 5mm thick rendering with ready mix mortar of approved make on ceiling surface finished even and smooth without using extra cement as whole or in patch including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of primer and including applying wall care putty not more than 1mm thick on wall / ceiling even and smooth surface complete all as specified and directed.

M&L applying two coat of weather proof exterior acrylic emulsion paint over a coat of primer of approved make & shade and including applying wall care putty not more than 1mm thick on wall and smooth surface and including complete removal of existing treatment and preparing the surface with sand papering of surface with the help of mechanized sanders (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) etc complete all as specified and directed.

M&L preparation of old Open APP Mebrane roof surface of any description over 10 cm width or girth and applying two coats of aluminium paint over a coat of primer complete all as specified and directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.

M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair 28mm dia MS drapery curtain rod with coloured PVC coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone Aggregate) as in bed blocks for gola, hold fast, coping bedding rounded or chamfered complete all as specified and directed.

Taking down wooden window/ventilator frames with shutters not exc 1.00 sqm each (without taking off shutters from frame) all as specified.

Taking down door/window/ventilator frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed.

M&L powder coated aluminium window and ventilator shutters, fixed type, aluminium section weighing 0.55 kg/m including power coated aluminium grill and necessary fittings etc complete all as specified and directed.

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.

S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.

M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 600mm x 600mm, 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

All as per item 62 but size 400mm x 400mm, 6 to 7mm thick

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of walls etc and including dismantling of plain or corrugated steel sheeting, any gauge, thickness, incl Nainital or similar patter roof coverage / wall cladding complete all as specified and directed.

All as per item 64 but except sheet

M&L for framed work such as grills, grating etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe - 410-0 or Fe - 310 - 0 including dismantling of mild steel work of any description complete all as specified and directed.

M&L for preparation of new steel surfaces, painting two coats of synthetic enamel paints over a coat of red oxide primer exc 10mm width or girth complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 137108.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

Chandramauli Engineers Pvt. Ltd.

GLOBAL DEVELOPERS COMPANY

M/S Ayub Khan

M/S DSSP Construction Co.

V r traders

B. S BUILDERS