Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹23.2 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹30.5 L+₹7.3 L (31.5%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹31.2 L+₹8.0 L (34.7%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹33.0 L+₹9.8 L (42.2%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹34.8 L+₹11.7 L (50.4%)Rejected-Finance F NO 117 GROUND FLOOR SUN RISE APARTMENT PLOT NO 6 DWARKA NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹40.7 L
EMD Value
₹81,400
Closing Date
27 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
PROVN OF GREASE TRAP IN OR COOK HOUSE AT AFSR AND DSC MESS AND CERTAIN MINOR WORKS AT DIFFERENT LOCATIONS OF AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_616395_1
GENP-50/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹81,400
Yes
5 Dec 2023
30 Aug 2023
28 Sept 2023
30 Aug 2023
27 Sept 2023
14 Sept 2023
Amount
S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets complete all as specified.
M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome including preparation of newly steel and iron surfaces of any description over 10 cm in width or girth complete all as specified.
M & L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making goog dismantalled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified.
S&F for rolled mild steel in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, ladders, walk way, railings and similar work including cutting, welding with proper overlapping & welding with angle iron bottom and conforming to Fe 410 -W (Gde E- 250) quality 'A' complete all as specified.
M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth surface without using extra cement all as specified .
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer using roller including necessary scaffolding complete all as specified.
M&L for 20 thick granite (jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like laid over 20mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including exposed edges to make half round complete all as specified.
M&L for non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including 15mm thick screed bed in cement mortar 1:6 all as specified.
M&L for non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm as in skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including 10mm thick rendering in cement mortar 1:4 all as specified.
S&F for wash hand basin, vitreous china, flat back of size 550mm x 400mm, white including CP waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of mild steel 35mm x 35mm x 6mm including one 15mm dia pillar tap, cast copper alloy chromium plated,one CP brass stop valve 15mm dia and one PVC connection15mm size with PTMT nuts of length 450mm all as specified.
S&F for 15mm dia tubes, 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified.
S&F for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position all as specified.
Dismantling of wall and ceiling boards ( fibre , pulp,insulation etc.) or insulation boards / slabs / blankets , any thickness including cover fillets complete all as specified.
S&F for 8 mm thick fire retarding ceiling with calcium silicate board of size 600mm x 600mm fixed with staples on snap grid etc with all hanging accessories, cut out to made for lighting, fixture and AC grills complete all as specified.
S&F for anodised aluminium powder coated (coating not less than 50 Micron) snap grid frame work of size 605mm x 605mm for false ceiling all as specified.
S&F for anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for door, windows, ventilators, partition wall etc with one or more rebates including joining cleat for fixing etc, and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia and size including neccessary filling up the gaps at junctions ie at top,bottom and sides with required EPDM rubber complete all as specified.
S&F for anodised aluminium powder coated (minimum thickness of power coating 50 micron) door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screw etc complete all as specified.
S&F for 19 mm thick prelaminated particle board, interior grade, prelaminated with decorative choice lamination & other side balancing white lamination fixed witrh screws to frame work in narrow widths not exc 15 cm each rebated or flat edge as in partition wall complete all as specified.
S&F for 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to aluminium / timber frame work complete all as specified.
S&F for mild steel mortic lock vertical type size 100mm 4 levers
S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed.
S&F for aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified.
S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified.
S&F for rolled mild steel framed work of angles or tees as in wall mounting board, frame etc cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, hooks ,riveting, etc conforming to Fe 410-0 or Fe 310-0.
S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 (Gde E165) complete all as specified.
S&F for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 15cm long and not exc 22.5cm long diameter of shank 11 to 15 mm complete all as specified.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.
M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) and set in cement mortar 1:4 as in landing cover slab,shelves troughs and the like including weathering slightly rounded or chamfered angles and throating all as specified.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.
M&L for providing reinforcement cement concrete type B-1,1:2:4 (nominal mix using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L for cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, bed plates etc including necessary form work including weathering, slightly rounded or chamfered angles and throating complete all as specified.
M&L for cutting holes in brick walls exc half brick but not exc one brick in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 type B-1 upto four storied building including necessary scaffolding and safety arrangement complete all as specified.
S&F for rolled mild steel as joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E165) upto G+3 storied building including necessary scaffolding and safety arrangement for cooler stand and similar works complete all as specified.
Supply, fixing and testing of armoured cable copper conductor 4 core 1.5 sqmm including steel saddles, screw for fixing of cable on wall /roof/ceiling/ ducts/ trenches etc including PVC heavy duty conduit ISI marked 25mm dia complete all as specified.
S&F for copper conductor cable of 2 core 1.5 sqmm FRLS suitale for power supply to UV/IR flame detector including PVC conduit heavy duty 25 mm dia with clamping arrangement complete all as specified.
Supply, installation, testing and commissioning of microprocessor based 4 Zone conventional fire alarm control panel robustly designed and easy to operate, fully compliant with and tested to BS EN 54-2 and BS EN 54-4, Compatible for use on BS5839, Part 1, 2002 installation, 2 wire repeaters and ancillary boards, fully programmable using simple menu options, simple, single board construciton, installer friendly, compatible with Hochiki, conventional range of devices, two monitored sounder outputs, 3 Amp power supply, auxiliary power output, The control must be EN 54 approved complete all as specified and as directed by Engr-in-Charge. Make : Ceasefire/siemens/honeybell
M&L for fire alarm sounder/siren electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5m with sound output variation of + 5 db of capacity 3500 mtr range all as specified. Make: National, Havells, Kheraj.
Supply, installation, testing and commissioning of Photo electronic smoke cum heat detector suitable for conventional panel conforming to IS-11360 -1985 having dual ionized chamber meant for easy detection of high carbonized fumes by means of light emitting principle complete with base, UL FM LPCB complete all as specified and directed. Make: Siemens/Honeywell/HOCHIKI.
S&F for addressable manual call point/pull station single action type with gold plated SPST contacts. Make: Siemens/Honeywall/ Ceasefire/ Hochiki/LTS/Agni.
S&F for UPS 1.0 KVA suitable for working on 230 volts 50 Hz AC supply complete. Make: Microtec/Sukam/APC.
Demolition of brickwork or stone/ boulder masonry built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris from site to outside MoD land.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removing the debris from site to outside MoD land .
Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc built in cement or cement lime mortar all as specified.
Demolition of reinforced cement concrete in shelves, slabs of any description and in any position including removing the debris from site to outside MoD land .
Demolition of concrete in ground floor and paveings not exc 15 cm thickness below or above ground level including removing the debris from site to outside MoD land .
M&L for cement concrete 1:4:8, type D-2 (Using 40mm graded stone aggregate ) as in foundation, mass concrete and filiing complete all as specified..
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including necessary scaffolding upto 8 Mtr height complete all as specified.
All as per item No 49 above but except bricks ( old serviceable bricks shall be re-used).
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 included finishing surface even and fair without using extra cement and with water proofing compound by weight as per manufacturer's instructions including necessary scaffolding upto 8 Mtr height complete all as specified (Note: WPC shall be measured and paid separately as supply only ).
M& L for flush pointing to brick walls in cement mortar 1:4 including necessary scaffolding upto 8 Mtr height complete all as specified.
Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels and simillar work rough finished surfaces of concrete all as specified.
M&L for reinforcement cement concrete (nominal mix) type B-1, 1:2:4 (20mm graded stone aggregate) as in beams, cantilevers, ressummers, lintels over 1.5m span etc including necessary scaffolding complete all as specified.
M&L for mild steel TMT bars 8mm dia and over as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.
Suppy only integral water proofing compound.
Removing loose sand and deposits at site including loading, unloading and stacking and transport etc and returning filling same sand and sieves after spreading in layers not exceeding 30cm thick watering, ramming and finishing to required shape, slope etc complete all as specified and directed by Engr-in -charge. (Note : Rate includes for distance not exc 100 m and depositing sand at site where directed at a level not exc 1.5 m above the starting point).
M&L for filling sand and saw dust mixture in ratio of 1:1 ( by volume) with proper sieving the sand of averaging size 1.18mm,100% passing through 2.36mm and 100% retained on 600 micron,spreading in layers not exceeding 30cm,thick,watering,ramming and finishing to required shape,slope etc complete all as specified and directed by Engr-in -charge. (Note : Prior approval for sand shall be taken from Engr-in-charge. Punned thickness of sand saw dust mixture shall be measured and paid).
M& L for complete removal of existing surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over 2mm thick (avg) wall care cement putty including preparation of surfaces.
M&L for preparation of newly plaster surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint complete all as specified.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified.
S&F for SFRC cover with frame of size 300mm x300mm x 50mm thick suitable for square gulley trap complete all as specified.
M&L for 15mm thick rendering by using manufactured sand in cement mortar 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all specified.
S&F for 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors or walls etc including CI bends and CI branch piece complete all as specifed.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified.
All as per item No 65 here-in-before but depth exceeding 1.50m and not exceeding 3mtr.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified.
Removing excavated materials/ soil from site to outside MOD land.
M&L for concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested.
M&L for 150 mm internal bore reinforced cement concrete drain pipes, Class NP-2 laid in trenches and jointed complete all as specified..
MS&F for SFRC Manhole cover of size 600mm x 600mm x 70mm thick laid with frame complete all as specified.
S&F for grease separator (nominal size : NS 10) made of polyethylene as per DIN EN 1825, proven stability of 50 years, for below ground installation. Overall dia 1320 mm : with ventilation provision, emptying via suction line DN 65 PN 10, counter flange with fire hose quick coupling 75B and 2(1/2)” blank cap and satisfy reaction to fire class A. Standard odour tight top cover of 600 mm dia. clear opening;frame made of concrete material and cover made of cast iron, with raising tube, load class B125 according to EN124, inlet and outlet dia. of pipe DN150, with grease storage capacity of 415 L, Sludge Storage 1010 L and overall capacity 2170 L including necessary excavation, returning, filling and removal of soil, 150 mm thick PCC in foundation 1:2:4 (type B-1) using 20mm graded stone aggregate all as per manufacturer's instructions and as specified and directed by Engr-in-Charge. (Make : Lipumax(ACO) , Kessel or its equivalent).
High Tech Metal India
ETERNITY PROJECT
Mahesh Enterprises
VDM GROUPS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .