MALVAN WATER SUPPLY SCHEME.UNDER SUVARNA JAYANTI NAGAROTHAN PROGRAMME OF GOVERNMENT OF MAHARASHTRA TALUKA- MALVAN DIST- SINDHUDURG

Amount

Subwork No 1 :- Designing, Providing , installing , comm.& testing of V.T.Pump set & allied works @ Dhamapur Jackwell

I/1:-V.T.Pump Set Providing, installing ,comm. With test & trial of V.T.Pump set Capable of discharging 137000 LPH Water against a total head of 154 mtr from all causes including bowl assembly, column assembly discharge head ,Sole plate, frame, Pressure gauge, channel iorn & as per detailed specifications etc comp.(Market Rate as per Rate Analysis)

I/2:-VHS Motor:- Providing, installing ,comm. With test & trial of 150 HP VHS motor suitable for above pump set in item No.1 & as per detailed specifications etc comp.(As per R.A)

I/3:- FCMA/ HFSR Electrical Soft Starter:- Providing, installing ,comm. With test & trial of F/A FCMA Starter suitable for 150HP & above motor in item No.2 & as per detailed specifications etc comp.(As per R.A)

I/4:-L.T.Panel board (Box type):- Providing, installing ,comm. With test & trial of floor mounting Box type L.T.Panel board including all acessories & as per detailed specifications etc comp.

I/5(a):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (3.5coreX1X240) sqmm (Double Run) etc.& as per detailed specifications etc comp.(From Transformer to L.T.Panel board)(As per R.A)

I/5(b):-Excavation:- Making the trench in hard murum/Tar road of suitable width & depth for laying provided L.T.Cable of 25 Sqmm & above & covered with half round hume pipe complete. (PWD DSR No.16-1-3,P.No.148 & Note 1&2) (As per R.A)

I/5(C):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (3 core X240) sqmm etc.& as per detailed specifications etc comp.(From Panel to Starter & Starter to motor)(As per R.A)

I/5(d):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (1X3 X50) sqmm etc.& as per detailed specifications etc comp.(For Capacitor)(As per R.A)

I/6(a):-Earthing Arrangement:- Providing, installing ,comm. With test & trial GI Earthing arrangement to the installation , motor,starter etc & as per detailed specifications etc comp.

I/6(b):-G.I.Strips:- Providing erecting G.I.Strip for earthing arrangement & as per detailed specifications etc comp.(As per R.A)

I/7(a): 200mmdia Sluice Valve(Cast steel) (Cl-300) Providing, installing ,comm. With test & trial of 200mm dia cast steel Sluice valve (Cl-300) with wheels etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(b):- 200mm dia Electric Valve Actuators:-Providing,erecting 200mm dia electric valave actuators totally enclosed ,weather-proof and dust proof construction with IP-67,protection class suitable for installation in any position without lubrication , leakage leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor & with 10 w single phase space heater and continuous local mechanical position indicator and individually replaceble counter gear assembly and with two torque and four limit switches with S.S.flap and operated with gear driven cams and of rating 250 volts, 5A, AC/ DC torque switch dial and with TEFC squirrel cage induction motor working on 440 volts +/-10%, 3ph, 50Hz,AC of intermittent duty rating S-2, insulation class F and temp rise restricted to class B with IP-67 protection class suitable for DOL starting and with three thermostst and 30% over load margin. The torque rating of reduction gear box shall at least 1.5 times max.torque required for opening and closing valve. (As per R.A) with TPI

I/7(c):- 200mmdia Reflux Valve (Cast steel) (Cl-300) Providing, installing ,comm. With test & trial of 200mm dia cast steel Non return valve (Cl-300) etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(d):- 300mmdia Reflux Valve:- (Cast steel) Providing, installing ,comm. With test & trial of 300mm dia cast steel Non return valve (Cl-300) etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(e):150mm dia Kinetic Air Valve(Cl-300) :- Providing, installing ,comm. With test & trial of 150mm dia Kinetic Air valve (C.S) etc comp. & as per detailed specifications etc .(As per R.A)

I/8(a):- M.S.Pipes & Specials:- Providing, erecting, jointing With test & trial of required size M.S.Pipes & Specials etc comp.(As per R.A)

I/8(b):- 200mm dia flanged Joints:- Providing, erecting, jointing With test & trial of 200mm dia flanged Joints with required material rubber packing & nut bolts etc comp.& as per detailed specifications etc comp.(As per R.A)

I/8(C):-200mm dia Dismentalling joints:- Providing, erecting, jointing With test & trial of 200mm dia dismentalling Joints with required material etc comp.& as per detailed specifications etc comp.(As per R.A)

I/9:-Internal Electrification:- Providing, installing ,comm. With test & trial of Internal Electrification arrangement in jackwell pumping station including 9 point, two plug, flouroscent tube-4, street light-4 , wall fan-2, Power point -2 with boards & switches etc. & as per detailed specifications etc comp.(As per R.A)

I/10:- Lifting equipement :- (Hand Operated) Providing, installing ,comm. With test & trial of Gantry arrangement suitable for 5 Ton capacity including C.P.Block , Travelling trolley, Square bar, gantry girder etc & as per detailed specifications etc comp.(As per R.A) with 50x50 Sqmm square bar of 19m and 255x110 track girder-0.31MT with TPI

I/11:-Tools:- Providing set of tools as per detailed specification & rate analysis & as per detailed specifications etc comp.(As per R.A)

I/12:-C.C.foundation:- Providing, installing ,comm. With test & trial of C.C.foundation block etc comp.(As per R.A)

I/13(A):Full Bore Electromagnetic flow meter: Providing,erecting,commissioning & testing 300mm Electromagnetic flow meter as per ISO-4064 for Raw /pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100mm -1000mm including sensor, transmitter, surge arrestor,cable GI duct of suitable size for 25mtrs built in GSM(with simcard and its charges valid for 36 months) including the pipe cutting levelling and installation of flow meter in the pipe lines with necessary tool tackles,cranes including 36 months guarantee etc comp. (As per R.A)

I/13:-(B) Providing,erecting,commissioning & testing 300mm dia. Mechanical joints etc comp.(As per R.A)

I/13:-(C)Making Gas cutting to the 406mm dia M.S. Pipes to both sides for installation of Flow meter etc comp. (As per RA)

I/13:-(D) BB Masonary Chamber for flow meter: Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.

I/14:-Test & Trial:- Testing, oprating & trial of pumping machinery & all allied equipment as per direction of engineer in charge etc comp.

I/15:-External Electrification to the approach road to well & Head works Area :-Providing, installing, comm. With test & trial of External Electrification arrangement treatment plant area,Sumpwell & Section Office including tubular pole=10 Nos, CC foundation= 10, FRP box=10Nos , LEDstreet light 75W=10Nos, Arm.cable coper 4CX10Sqmm=300 mtr, Arm.cable copper 3CX2.5 Sqmm=100mtr, Anchor type DP=10Nos, Earthing arrangement =05 Nos , street light bracket =10Nos, Quartz electronic time switch=1No. , 4 pole 40A Power switch=1No, gate light fitting=2Nos & LED flood light of fitting 30-40W=2Nos etc. & as per detailed specifications etc comp. (As per R.A)

I/16:-Providing, installing & commisssioning of 11 Kv/ 0.44 Kv outdoor substation alongwith 315 KVA power transformation & HT metering Kiosk etc. complete as per detailed specifications.

I/17:-Providing,installing and commissioning of SCADA Automation for operational control/Data Communication System as per RA

Sub work No-02 - RAW WATER RISING MAIN FROM DHAMAPUR JACKWELL TO CHOWKE BPT- A PIPE , SPECIALS & APPURTENANCES

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets. Corregundum N0-07 Dt. 07.03.2022

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to requried size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 350 mm dia (DI K9) Corregundum N0-07 Dt. 07.03.2022

Providing erecting Cast Steel/Spheroidal Graphite (S.G.) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware & packing) water works quality,having non-rising spindle with hand wheel & without bypass arrangement, spindle of stainless steel as per requirement, excluding C.C. foundation/ structural steel support. 350mm dia (MJP DSR-2021-22, Sec-I-(XII)-11 A-b, P No. 138)

Providing & fixing in position & jointing high performance C.I. Air valves for water combination type(Kinetic air valve along with automatic air valves) double ball,double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release & anti vaccum application designed for 16 kg.Per sq.cm. working pressure &tested for 20 for kg per sq.cm.pressure. (Rate to include cost of gaskets, bolt, nut & any other material required for jointing & its transportation etc. including all taxes & duties except octroi) 1. C.I. ARV FLFF PN 1.6 100mm Dia. (MJP DSR-2021-22, Sec-I-(XII)-22, P No. 143)

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. (MJP DSR-2021-22, It No. 10b, P No. 73)

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. (MJP DSR-2021-22, Sec-I-I-07, P No. 72)

Providing erecting Cast Steel/ Spheroidal Graphite (S.G) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware and packing) water works quality, having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, inspection charges, transportation upto departmental store, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. excluding C. C. foundation / structural steel support. For Rating class 150 (Working Pressure 20 kg/ sqcm and Test pressure 30 kg/sqcm) 350 mm dia (MJP DSR-2021-22, Sec-I-XII-11 A-a, P No. 138)

Air Cusion Valves (Rate from Quotations)

B Excavation and other labour part AVRAGE EXCAVATION QUNTITY AND AVRAGE AMMOUNT CONSIDERED excavation per foundation / pipe trenches in earth soil of all types sand graval and soft murum (BDA 1/259) mgp dsr 21-22 sec- E - 1 - pg n. 42 350 mm dia DI k9 hard murum (BDA 1/259) mgp dsr 21-22 sec- E - 2 - pg n. 42 350 mm dia DI k9 hard rock and concrit road by chiselling (BDA 1/259) mgp dsr 21-22 sec- E - 7 - pg n. 43 350 mm dia DI k9 laterite rock (BDA 1/259) mgp dsr 21-22 sec- E- 8 - pg n. 43 350 mm dia DI k9

Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. 350 mm dia (DI K9) (MJP DSR-2021-22, Sec-I-I-2(a), P No. 70)

Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified.350 mm dia (MS Pipe ID 5.6mm thk) (MJP DSR-2021-22, Sec-I-XVI-1, P No. 165)

Lowering, laying and jointing in position following C.I.D.F. reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 300 mm dia (MJP DSR-2021-22, Sec-I-(XII)-4a, P No.135)

Providing and fixing in position air valve shaft including providing and fixing GI Medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 Concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) A) Foundation on Murum and Hard Strata ii) 200 to 400 mm dia pipe line (MJP DSR-2021-22, Sec-I-XII-17a, Pg-140)

Providing and constructing BB masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation, BB masonry in CM 1:5 proportion 12mm thick cement plaster in CM 1:4 proportion on both sides and providing and fixing frame and cover etc. complete as directed by Engineer-in-charge Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 1.5 X 1.5 m internal size and depth up to 1.5 m (MJP DSR-2021-22, Sec-I-(XX)-3, P No.222)

Providing and laying in situ Cement Concrete of trap / granite / quatzite / gneiss metal for RCC works in foundation like raft, grillage strip foundation and footing of RCC columns and steel stanchions including normal dewatering formwork compaction, finishing and curing etc. complete. (By weigh batching and mix design for M 250 and M 300 only. Use of L and T, ACC, Ambuja, Birla gold, manikand, rajashree etc. cement is permitted ) RCC M 200 grade Rate analysis M-20 RCC (Raft & Foundation)

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footing, foundations, \slabs, beams, columns, canopies,staircase, newels, chajjas, lintels, pardies coping, fins, arches, etc as per detailed drawings and schedules; including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required, complete.(including cost of binding wire) Tor Steel Corregundum N0-09 Dt 06.05.2022

Welding in all position with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. Butt joints- 8 mm tk plate tk.

Lap joints with convex fillet welds Lap Lengths- 8 mm tk (MJP DSR-2021-22, Sec-XVI-7, Pg-169)

Transporting within 500 meters,laying in position to correct line and level M. S. specials pipes with / without any outcoating, such as distance pieces, straps, bends, tapers, etc. on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding, the same. The rate to include loading, unloading, hoisting, etc. complete as specified. 5 mm to 8 mm thk ii) 200 to 400 mm dia pipe line (MJP DSR-2021-22, Sec-XVI-5, IT No-6, Pg-168)

Gas cutting (either square cut or V cut) pipes, plates etc of thickness. above 5mm up to 10mm (MJP DSR-2021-22, Sec-XVI-12, Pg-170)

Providing and applying 3 layer polyethylene coating of minimum 1000 micron composite coating and internal fusion bonded epoxy lining as per IS 3589 annex Cof 400 micron thickness for underground laying M.S. Pipes, simil arly dual layer polyester coating of 400 micron externally and internal fusion bonded lining shall include cost of material coating and wrapping over the pipes handling charges, preparation of pipe surface, all labour, material, includingtransportationof pipes from site of works to factory and back to site of works after coating with including all satutory duties & taxes such as GST levied by GOI & GOM in all respect etc. complete. (The rate is for inside plus outside area both included)(MJP DSR-2021-22, Sec-H-19, Pg-67)

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 350mm dDI K-9 (MJP DSR-2021-22, Sec-XVI-12, Pg-74)

Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length up to 1 km, using reciprocating type pumps which should be able to provide specified test pressure gauges, and other equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. Upto 600mm dia (ID) (Extra work initial km) (MJP DSR-2021-22, Sec-XVI-17, Pg-171)

Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length up to 1 km, using reciprocating type pumps which should be able to provide specified test pressure gauges, and other equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. Upto 600mm dia (ID) (MJP DSR-2021-22, Sec-XVI-17, Pg-171)

Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil) (MJP DSR 2021-22, Sec-E-15, P No. 45)

Disposal of excavated stuff at 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge. MJP DSR-2021-22 Statement VI, Page No-23

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (MJP DSR-2021-22, Sec-E-14, Pg-45)

Manufacturing, providing and supplying spirally welded/ERW/SAW/ fabricated M.S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, track welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming 'V' edge on both ends of pipes including all taxes (Central & local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores/ site, unloading, stacking, etc, complete as per IS- 3589 and IS- 5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 800 mm dia ID (12 mm thk) Corregundum N0-07 Dt 07.03.2022

Pushing of M.S. Pipe of following dia. For road crossing & Railway Crossing by push through method in all types of strata by using hydraulic jack & drilling machine of required diameter below M.S. casing pipe lowering, laying, jointing of material, required welding machinery, tripod, chain pulley block, crane blower compressor, loading & unloading of machinery in to the trench etc. transportation & dewatering etc.complete as directed by Engineer-in-charge but excluding cost of M.S. pipes.b) 500 mm dia. To 1000 mm dia. M.S. pipe (MJP DSR-2021-22, Sec-H-14, Pg-63)

Subwork No:-3 : Designing, Providing , installing , comm.& testing of V.T.Pump set & allied works @ Dongurla Jackwell

I/1:-V.T.Pump Set Providing, installing ,comm. With test & trial of V.T.Pump set Capable of discharging 274000 LPH Water against a total head of 23 mtr from all causes including Channel iron frame,Pressure gauge & as per detailed specifications etc comp.(Market Rate as per Rate Analysis) with 13.5m column assembly

I/2:-VHS Motor:- Providing, installing ,comm. With test & trial of 40 HP VHS motor suitable for above pump set in item No.1 & as per detailed specifications etc comp.(As per R.A)

I/3:- F/A ATS Starter:- Providing, installing ,comm. With test & trial of F/A ATS Starter suitable for 40HP with air break contactor & above motor in item No.2 & as per detailed specifications etc comp.(As per R.A)

I/4:-L.T.Panel board (Cubical Box type):- Providing, installing ,comm. With test & trial of floor mounting Cubical Box type L.T.Panel board including all acessories & as per detailed specifications etc comp.

I/5(a):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium rmoured cable of type (3.5core X 95) sqmm etc.& as per detailed specifications etc comp.(From Transformer to L.T.Panel board PWSW & WTP)(As per R.A)

I/5(b):-Excavation:- Making the trench in hard murum/Tar road of suitable width & depth for laying provided L.T.Cable of 25 Sqmm & above & covered with half round hume pipe complete. (PWD DSR No.16-1-3,P.No.148 & Note 1&2) (As per R.A)

I/5(C):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (3.5 coreX25) sqmm etc.& as per detailed specifications etc comp.(From Panel to Starter & Starter to motor)(As per R.A)

I/5(d):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (1X3X4) sqmm etc.& as per detailed specifications etc comp.(For Capacitor)(As per R.A)

I/6(a):-Earthing Arrangement:- GI Iron Providing, installing ,comm. With test & trial Earthing arrangement to the installation , motor,starter etc & as per detailed specifications etc comp.

I/6(b):-G.I.Strips:- Providing erecting G.I.Strip for earthing arrangement & as per detailed specifications etc comp.(As per R.A)

I/7(a):-250mmdia DIDF Sluice Valve (PN-1.6) Providing, installing ,comm. With test & trial of 250mm dia cast iron Sluice valve (Glandless) with wheels etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(b):- 250mm dia Electric Valve Actuators:-Providing,erecting 200mm dia electric valave actuators totally enclosed ,weather-proof and dust proof construction with IP-67,protection class suitable for installation in any position without lubrication , leakage leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor and with 10 watt single phase space heater and continuous local mechanical position indicator and individually replaceble counter gear assembly and with two torque and four limit switchs with S.S.flap and operated with gear driven cams and of rating 250 volts,5A, AC /DC torque switch dial and with TEFC squirrel cage induction motor working on 440 volts +/-10%,3ph,50Hz,AC of intermittent duty rating S-2,insulation class F and temp rise restricted to class B with IP-67 protection class suitable for DOL starting and with three thermostst and 30% overload margin. The torque rating of reduction gear box shall at least 1.5 times max. torque required for opening and closing valve. (As per R.A)

I/7(c):- 250mmdia C.I. Reflux Valve(PN-10) Providing, installing ,comm. With test & trial of 250mm dia cast iron Non return valve with B.P.A. etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(d):- 250mmdia Reflux Valve:- Providing, installing ,comm. With test & trial of 250mm dia cast steel Non return valve etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(e):80mm dia Kinetic Air Valve(PN-1.0) :- Providing, installing ,comm. With test & trial of 100mm dia Kinetic Double orifice Air Valve with Sluice valve (CI) etc comp.& as per detailed specifications etc. (As per R.A) PN 1.0

I/8(a):- M.S.Pipes & Specials:- Providing, erecting, jointing With test & trial of required size M.S.Pipes & Specials etc comp.(As per R.A)

I/8(b):- 250mm dia flanged Joints:- Providing, erecting, jointing With test & trial of 250mm dia flanged Joints with required material rubber packing & nut bolts etc comp.& as per detailed specifications etc comp.(As per R.A)

I/8(C):-250mm dia Dismentalling joints:- Providing, erecting, jointing With test & trial of 250mm dia dismentalling Joints with required material etc comp.& as per detailed specifications etc comp.(As per R.A)

I/9:-Internal Electrification:- Providing, installing ,comm. With test & trial of Internal Electrification arrangement in Sumpwell pumping station including five point, two plug, flouroscent tube, street light, wall fan with boards & switches etc. & as per detailed specifications etc comp.(As per R.A)

I/10:- Lifting equipement :- (Hand Operated) Providing, installing ,comm. With test & trial of Gantry arrangement suitable for 3 Ton capacity including C.P.Block , Travelling trolley, sqare bar, gantry girder etc & as per detailed specifications etc comp.(As per R.A) with 50x50 mm square bar of 19m & TPI

I/11:-Tools:- Providing set of tools as per detailed specification & rate analysis & as per detailed specifications etc comp.(As per R.A)

I/12:-C.C.foundation:- Providing, installing ,comm. With test & trial of C.C.foundation block for panel board & Valves etc comp.(As per R.A)

I/13(A):Full Bore Electromagnetic flow meter: Providing,erecting,commissioning & testing 250mm Electromagnetic flow meter as per ISO-4064 for Raw /pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100mm -1000mm including sensor, transmitter, surge arrestor,cable GI duct of suitable size for 25mtrs built in GSM(with simcard and its charges valid for 36 months) including the pipe cutting levelling and installation of flow meter in the pipe lines with necessary tool tackles,cranes including 36 months guarantee etc comp. (As per R.A) with TPI

I/13:-(b) Providing,erecting,commissioning & testing 250mm dia. Mechanical joints etc comp.(MJP Civil DSR No.XIV.2(v), P.236)

I/13:-(D) BB Masonary Chamber for flow meter: Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.

I/14:-Test & Trial:- Testing, oprating & trial of pumping machinery & all allied equipment as per direction of engineer in charge etc comp. at WTP site

I/15:-External Electrification to the approach road to well & Head works Area :- Providing, installing ,comm. With test & trial of External Electrification arrangement Treatment plant area,Sumpwell & Section office including Tubular pole=10 Nos , CC foundation= 10 , FRP box=10Nos , LEDstreet light 75W=10Nos ,Arm.cable copper 4CX10Sqmm=300 mtr, Arm.cable copper 3CX2.5 Sqmm=100mtr, Anchor type DP=10Nos, Earthing arrangement =05 Nos , street light bracket =10Nos, Quartz electronic time switch= 1No. , 4 pole 40A Power switch=1No, gate light fitting=2 Nos & LED Flood light fitting of 30-40W=2Nos etc. & as per detailed specifications etc comp.(As per R.A)

I/16:-Providing, installing & commisssioning of 11 Kv/ 0.44 Kv outdoor substation alongwith 63 KVA power transformation & HT metering Kiosk etc. complete as per detailed specifications.

I/17:-Providing,installing and commissioning of SCADA Automation for operational control/Data Communication System as per RA

Sub Work No 4 : Restoration of Existing Head Work at Dongurla A jackwell

Part A Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with B. C. soil (in gunny bags if requried). Providing impervious / semipervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfaction of Engineer-in-charge, till the complection of work including dismantling coffer dam after complection of works and disposing off the material as directed by the Engineer-in-charge. (MJP DSR 2021-22, Sec-N- 1,P No. 228)

Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5M and lead of 150 M including barricading, guarding, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in?charge, etc. complete excluding refilling .Lift 0.00 to 1.50 (MJP DSR 2021-22, Sec-E- 14,P No. 44)

Providing & casting insitu cement concret in proportion M 15 of trap metal for foundation & bedding including bailing out water manually form work compecting & curing. M 15 for PCC (MJP DSR 2021-22, Sec-G- 1,P No. 49) RA

Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted. Excluding M.S. or Tor reinforcement). In RCC M-300 (MJP DSR 2021-22, Sec-G-2,P No.49) RA

Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, plywood form work, bully/ steel prop ups, compaction, finishing the formed surfaces with CM 1: 3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 & M-300 only. Use for L & T, A.C.C., Birla Gold, Ambuja, Manikgad, Rajashree, etc. cement is permitted.) R.C.C. M – 300 grade slabs/ Lndings/ Vertical Walls/ Waist Slabs/ Steps for staircase Lift 0-5.0 m (MJP DSR 2021-22, Sec-G- 5c, P No. 50) RA

Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be proviided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S, or Tor reinforcement) For RCC M-250 grade Slabs Deck Slab over Jack Well (MJP DSR 2021-22, Sec-G- 5, P No. 50) RA

Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel Corregundum No-07 Dt. 06.05.2022

Providing fusion bonded epoxy coating to reinforcement bars as per IS-13620-993 specificaion for a thickness of 175 (+50) microns including extra cost on account of careful extra cost on account of using PVC coated binding wire instead of G. I. wire, extra cost on account of touch-up material supplied by coating agency and repair work extra cost on account of transportation to and fro from steel yard at Kalamboli to plant at Daman and Plant at Daman to work site by trailer, loading, unloading, including all taxes (Central and Local), etc. complete. (for 8mm to 20 mm dia) (MJP DSR 2021-22, Sec-G- 9 b1), P No. 52)

Prvoding and fixing in position C.I. /M.S. rose pieces in intake wells including costof all materials and labour, painting with three coats of anti-corrosive oil paint , etc.complete as directed by Engineer-in-charge. (MJP DSR 2021-22, Sec-M-13 , P No. 230)

Providing and Supplying ISI mark D.I. S & S pipes (push on joints pressure pipes of D.I. K-7 of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutory duties and taxes levied by Gol and GoM in all respect, Education cess, VAT, Third party inspection charges of TPI agency approved by MJP including Transit insurance, Railway freight unloading from Railway wagon, loading into trucks, transportation to departmental stores / site of work, unloading stacking etc. completed as directed by Engineer-in-charge (IS:8329/2000 for pipee and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gasskets.450 mm DI K-7 Corregundum No-07 Dt. 07.03.2022

CC M100 (MJP DSR 2021-22, Sec-G- 1, P No. 49)

PART B Providing rubble stone paving 15cm thick in 1:3 cement mortar over a bedding of 15cm thick cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal including skirting joints and atering etc. complete. (PWD DSR 2021-2022, It. No. 11.06 CD-4, P No. 62)

Sub Work No 4(2): Pump house

PART A Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be proviided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S, or Tor reinforcement) For RCC M-250 grade Slabs Roof Slab over Pump House and columns (MJP DSR 2021-22, Sec-G-5 b, P No.50)

Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel Corregundum No-09 Dt. 09.05.2022

Providing fusion bonded epoxy coating to reinforcement bars as per IS-13620-993 specificaion for a thickness of 175 (+50) microns including extra cost on account of careful extra cost on account of using PVC coated binding wire instead of G. I. wire, extra cost on account of touch-up material supplied by coating agency and repair work extra cost on account of transportation to and fro from steel yard at Kalamboli to plant at Daman and Plant at Daman to work site by trailer, loading, unloading, including all taxes (Central and Local), etc. complete. (MJP DSR 2021-22, Sec-G- 9 b1), P No. 52)

Providing, errecting and commissioning single girder Electrically operated Rectangular Overhead Travelling Creane with 6m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP54, control panel & down pendant control box. 5 Tonnes Capacity (6 to 8m span) MJP ELECT MECH CSR 21-22 LF 4-1-1 P NO. 15

PART B Providing second class burnt brick masonry with conventional I/S type bricks in cement mortar 1:6 in superstructure, including striking joints, racking out joints, watering and scaffolding etc. complete. Vertical Brick wall (PWD DSR 2021- 2022 It. No. 27.05 Bd-G 5, P No. 144)

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (PWD DSR 2021- 22, BDT-55, It.No.39.24, P No. 181)

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) (PWD DSR 2021- 22,It. No.39.20 BDT-53 , Pg No.180)

Providing internal cement plaster 12mm thick in a single coat without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing etc. complete In Cm 1:5 (PWD DSR 2021-22, It. No. 32.03, BDL-2, P No.153) RA

Providing sand face plaster externally in two coats using approved screened sand including providing base coat of 15mm tk in CM 1:4 mixing approved water proofing compound @ 1kg/50kg of cement including preparing the surface and scaffolding etc. complete In Cm 1:4 (PWD DSR 2021- 22, It.No. 32.11 BDL-5, P No.201) RA

Providing and applying washable OBD of approved colour, shade and quality to new /old surface in including scaffolding, preparing the surface including primer etc. complete Two Coats (PWD DSR 2021-22, It.No. 36.11 BDP-5A, P No.167)

Providing and applying of water proof cement paint of approved manufacturer & colour to the plastered surface, including scaffolding, preparing the surface including primer etc. complete (PWD DSR 2021-22, It.No. 35.14 BDO-8, P No.164)

Sub Work No 4(3): APPROACH BRIDGE

PART 1 Excavation for foundation in hard rock by chiselling & wedging including shoring and strutting as necessary and disposal of excavted stuff excluding dewatering and as directed etc. complete (PWD SSR 2021- 22, It.No. 12.11 BR 3F, P No.63)

Dewatering on BHP basis by using water pumps 10 HP for foundation and other parts of the work and bailing out and pumping out water during and after exavation as required etc. complete (PWD SSR 2021-22, It.No. 12.24 BR 4B, P No.65)

Providing and laying insitu PCC-M15 cement concrete of trap/granite/quartzite/gneiss metal in foundation including necessary bailing out water, compactin, curing etc. complete (MJP DSR 2021-22, Sec-G- 1,P No. 49) MJP RA

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. mjp ssr 2021-22 I-sec F-5 , pn-48

Providing and laying insitu RCC - M 30 cement concrete for trap/ granite/ quartzite/gneiss metal for cast insitu RCC solid peir and foundation , column etc. including provision for "V" shaped false joint to form suitable panels on the faces to approve design with compacting by vibrating and curing complete. 7825*1.04+(0.425*231.44)+(0.90*341.06)=8543.32 PWD SSR 2021-2022, 17.49, P No. 103

Providing and laying insitu RCC - M 30 cement concrete for trap/ granite/ quartzite/gneiss metal for cast insitu RCC caps over peir and abutments including necessary scafolding, formwork, compacting by vibrating, finishing and curing etc. complete. 8318*1.04+(0.425*231.44)+(0.90*341.06)=9056.04 PWD SSR 2021-22 ,17.54, P No. 104

Providing and laying insitu RCC - M 30 cement concrete for trap/granite/quartzite/gneiss metal for cast insitu RCC abutments and dirt walls including necessary scafolding, formwork, compacting by vibrating, finishing and curing etc. complete. 7783*1.04+(0.425*231.44)+(0.90*341.06))=8494.64 PWD SSR 2021- 22,17.41, P No. 100

Providing and laying insitu RCC - M 30 cement concrete for trap/granite/quartzite/gneiss metal for cast insitu RCC solid slab, T-beam, slab, girder including necessary scafolding, formwork, compacting by vibrating, finishing and curing etc. complete. 10284*1.04+(0.425*231.44)+(0.90*341.06)=11083.62 PWD SSR 2021- 22, 14.17, P No. 94

Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel Corregundum No-09 Dt. 09.05.2022

Supplying, fitting and fixing in position true to line and level elastomeric bearing including all accessories as per drawing and technical specifications and IRC:83 (Pt-II) section IX and clause 2005 of MoRTH specifications etc. complete. PWD DSR 2021-22, 13.07 BR 448, P No.70

Providing railing of mild steel angle post 2.0m center to center of section 75mm x 75mm x 10mm or equivalent I/C section of height 1.05 above bridge surface with minimum anchor length of 30cm including hold fast of 25mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with three rows of 40mm B class GI pipe provided at 30cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete. PWD DSR 2020- 2021,40.08, P No.192

Providing 100 dia GI pipe drain water spout as per drawing etc. complete (PWD DSR 2021-22, It.No. 14.50 BR 55, P No.74)

Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete with fully automatic micro processor PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) as per drawings and technical specifications etc. complete. (concrete blocks of size 0.30x 0.30x0.30m in CC M15 grade) (PWD DSR 2021-22, I-14.73 Morth BR-495, P No.76

Providing and laying cement concrete wearing coat M30 grade with batch mix type concrete mixer with SCADA including reinforcement as per drawings and technical specifications etc. complete. PWD DSR 2021-22 ,BR-508, P No. 76 i-14.86

Sub Work No 5 : - RAW WATER RISING MAIN (300 MM DIA D.I. MAIN K-9)-From Dongurla Jackwell to Kumbharmath WTP

Providing and Supplying ISI mark K-9 S & S pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutory duties and taxes levied by Gol and GoM in all respect, Education cess, VAT, Third party inspection charges of TPI agency approved by MJP including Transit insurance, Railway freight unloading from Railway wagon, loading into trucks, transportation to departmental stores / site of work, unloading stacking etc. completed as directed by Engineer-in-charge (IS:8329/2000 for pipee and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gasskets. 300 mm dia DI K-9

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete. As per IS 9523 For all types of specials, bends, tees 80 to 300 mm dia

Providind erecting Cast Steel/Spheroidal Graphite (S.G.) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware & packing) water works quality,having non-rising spindle with hand wheel & without bypass arrangement, spindle of stainless steel as per requirement, excluding C.C. foundation/ structural steel support. 300 mm dia

Providing and fixing in position and jointing high performance C. I. Air valves for water combination type ( Kinetic air valve along with automatic air valves ) double ball, double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release and anti vacuum application designed for 16 Kg. Per sq. cm. working pressure and tested for 20 for kg per sq. cm. pressure. ( Rate to include cost of gaskets, bolt, nut and any other material required for jointing and its transportation etc. excluding GST levied by GOI & GOM in all respect. 1. C.I. ARV FLFF PN 1.6 100mm Dia.

AVERAGE Excavation and other labour part excavation per foundation / pipe trenches in earth soil of all types sand graval and soft murum (BDA 1/259) mgp dsr 21-22 sec- E - 1 - pg n. 42 300 mm dia DI PIPES laterite rock masses mechanically including lift upto 1.5 M including trimming and leveling the bed , removing the excavated material upto a distance of 50M beyond the area and lift as below, stacking as directed by engineer-in charge ,etc. complete. mgp dsr 21-22 sec- E - 8 - pg n. 43 300 mm dia DI PIPES

Cutting and chamfering of pipes of following dia including cost of all materials and labour involved etc. complete as directed by Engineer in charge (For all class of pipes) 300 mm dia

Lowering laying and jointing with SBR ruber gaskets C.I. S / S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from s tore s to site of work, including cost of jointing materials and rubberrings labour etc complete. CI LA class/ DI K-7 & K-9 class 300 mm dia

Lowering, laying and jointing in position following C.I.D.F. reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. CI LA class/ DI K-7 & K-9 class

providing and laying in position cement concrit of specifide grade M15 for PCC

Providing and constructing BB masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation, BB masonry in CM 1:5 proportion 12mm thick cement plaster in CM 1:4 proportion on both sides and providing and fixing frame and cover etc. complete as directed by Engineer-in-charge Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 1.2 X 1.2 m internal size and depth up to 1.5 m

Providing and fixing in position air valve shaft including providing and fixing GI Medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 Concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) A) Foundation on Murum and Hard Strata ii) 200 to 400 mm dia pipe line

Providing and laying in situ Cement Concrete of trap / granite / quatzite / gneiss metal for RCC works in foundation like raft, grillage strip foundation and footing of RCC columns and steel stanchions including normal dewatering formwork compaction, finishing and curing etc. complete. (By weigh batching and mix design for M 250 and M 300 only. Use of L and T, ACC, Ambuja, Birla gold, manikand, rajashree etc. cement is permitted ) In RCC M 200 grade

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footing, foundations, \slabs, beams, columns, canopies,staircase, newels, chajjas, lintels, pardies coping, fins, arches, etc as per detailed drawings and schedules; including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required, complete.(including cost of binding wire) Tor Steel

Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil)

Disposal of excavated stuff at 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Sub Work No 6 : - RAW WATER GRAVITY MAIN FROM CHOWKE BPT TO KUMBHARMATH WTP

Providing and Supplying ISI mark K-9 S & S pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutory duties and taxes levied by Gol and GoM in all respect, Education cess, VAT, Third party inspection charges of TPI agency approved by MJP including Transit insurance, Railway freight unloading from Railway wagon, loading into trucks, transportation to departmental stores / site of work, unloading stacking etc. completed as directed by Engineer-in-charge (IS:8329/2000 for pipee and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gasskets. 300 mm dia (DI K-9)

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to requried size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 300mm dia ID 6mm thk

Providind erecting Cast Steel/Spheroidal Graphite (S.G.) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware & packing) water works quality,having non-rising spindle with hand wheel & without bypass arrangement, spindle of stainless steel as per requirement, excluding C.C. foundation/ structural steel support. 300mm dia

Providing & fixing in position & jointing high performance C.I. Air valves for water combination type(Kinetic air valve along with automatic air valves) double ball,double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release & anti vaccum application designed for 16 kg.Per sq.cm. working pressure &tested for 20 for kg per sq.cm.pressure. (Rate to include cost of gaskets, bolt, nut & any other material required for jointing & its transportation etc. including all taxes & duties except octroi) 1. C.I. ARV FLFF PN 1.6 80mm Dia.

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete

Air Cusion Vales

B AVERAGE Excavation and other labour part excavation per foundation / pipe trenches in earth soil of all types sand graval and soft murum (BDA 1/259) mgp dsr 21-22 sec- E - 1 - pg n. 42 300mm dia ID 6mm thk hard murum (BDA 1/259) mgp dsr 21-22 sec- E - 2 - pg n. 42 300mm dia ID 6mm thk hard rock and concrit road by chiselling (BDA 1/259) mgp dsr 21-22 sec- E - 7 - pg n. 43 300mm dia ID 6mm thk laterite rock (BDA 1/259) mgp dsr 21-22 sec- E- 8 - pg n. 43 300mm dia ID 6mm thk

Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified. 300mm dia ID 6mm thk

Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete.

Lowering, laying and jointing in position following C.I.D.F. reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 300mm dia ID 6mm thk

Providing and fixing in position air valve shaft including providing and fixing GI Medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 Concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) A) Foundation on Murum and Hard Strata ii) 200 to 400 mm dia pipe line

Providing and constructing BB masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation, BB masonry in CM 1:5 proportion 12mm thick cement plaster in CM 1:4 proportion on both sides and providing and fixing frame and cover etc. complete as directed by Engineer-in-charge Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 1.5 X 1.5 m internal size and depth up to 1.5 m

Providing and laying in situ Cement Concrete of trap / granite / quatzite / gneiss metal for RCC works in foundation like raft, grillage strip foundation and footing of RCC columns and steel stanchions including normal dewatering formwork compaction, finishing and curing etc. complete. (By weigh batching and mix design for M 250 and M 300 only. Use of L and T, ACC, Ambuja, Birla gold, manikand, rajashree etc. cement is permitted ) RCC M 200 grade

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footing, foundations, \slabs, beams, columns, canopies,staircase, newels, chajjas, lintels, pardies coping, fins, arches, etc as per detailed drawings and schedules; including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required, complete.(including cost of binding wire) Tor Steel

Welding in all position with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. Butt joints- 8 mm tk plate tk.

Lap joints with convex fillet welds Lap Lengths- 8 mm tk

Transporting within 500 meters, laying in position to correct line and level M.S. pipes with / without any out coating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified. 5 mm to 8 mm thk 300mm dia ID 6mm thk

Gas cutting (either square cut or V cut) pipes, plates etc of thickness.

Providong and applying 3 layer polyethylene coating of minimum 1000 micron composite coating and internal fusion bonded epoxy lining as per IS 3589 annex Cof 400 micron thickness for underground laying M.S. Pipes, similarly dual layer polyester coating of 400 micron externally and internal fusion bonded lining shall include cost of material coating and wrapping over the pipes handling charges, preparation of pipe surface, all labour, material, includingtransportationof pipes from site of works to factory and back to site of works after coating with including all satutory duties & taxes such as GST levied by GOI & GOM in all respect etc. complete. (The rate is for inside plus outside area both included)

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 350mm dDI K-9

Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length up to 1 km, using reciprocating type pumps which should be able to provide specified test pressure gauges, and other equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. Upto 600mm dia (ID)

Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil)

Disposal of excavated stuff at 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Manufacturing, providing and supplying spirally welded/ERW/SAW/ fabricated M.S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, track welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming 'V' edge on both ends of pipes including all taxes (Central & local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores/ site, unloading, stacking, etc, complete as per IS- 3589 and IS- 5504 as applicable as per specifications (No negative tolerance in thickness is permissible). 700 mm dia ID (12 mm thk)

Pushing of M.S. Pipe of following dia. For road crossing & Railway Crossing by push through method in all types of strata by using hydraulic jack & drilling machine of required diameter below M.S. casing pipe lowering,laying,jointing of material,required welding machinery,tripod, chain pulley block, crane blower compressor, loading & unloading of machinery in to the trench etc. transportation & dewatering etc.complete as directed by Engineer-in-charge but excluding cost of M.S. pipes. b) 500 mm dia. To 1000 mm dia. M.S. pipe

Subwork No: 7 - Providing , installing , comm. & testing of Sub.(Mono)Pump set & allied works for Zone-4 ESR, Tal :Malvan,Dist:-Sindhudurg (AS per DSR MJP(M&C)

Item No.l :- Providing, installing, commissioning with testing Sub. (Mono) pump set capable of 31080.85 LPH water aginst a total head of 27 mtr. from all causes when running @ 2900 rpm etc. complete. (HP 7.5)

Item No.2 :- Providing, erecting, commissioning with test & trial floor mounting L.T.Panel board (Cubical Box type)with required accessories etc. complete.

Item No.3 (a) :- Providing erecting & testing of 100mm dia sluice valve (PN-1) with hand wheel etc. complete.

Item No.3 (b) :- Providing erecting & testing of 100mm dia Reflux valve (PN-1) etc. complete.

Item No.4 (a) :- Providing erecting & testing of 100mm dia G.I..D./F Vertical drop pipes etc. complete.

Item No.4 (b) :- Providing erecting & testing of 100mm dia flanged joints to G.I./M.S./D/F pipes etc. complete.

Item No.5:- Providing , erecting , jointing & testing of required size M.S.D/F pipes & Specials etc comp.

Item No. 6 :- Providing,installing, commissioning with test & trial pressure guage arrangement etc. complete.

Item No. 7(a) :- Providing, laying, jointing & testing of PVC waterproof Sub. cable (1x3x2.5) sqmm etc. complete.

Item No. 7 (b) :- Providing, laying, jointing & testing of PVC armoured cable (1x4 x 6) sqmm etc. complete.

Item No.7(c):-Excavation of trenches in any type of strata of suitable width , depth for laying providing cable & refilling the same with excavated material etc comp

Item No.7(d):-Supply of PVC conduit pipe etc comp.

Item No. 8) :- Providing, installing commissioning with testing of earthing arrangement to the installation of motor, panel etc. complete.

Item No.9 :- Providing, erecting & testing tripple spur gear type chain pulley block suitable for (1 ton) capacity etc. complete.

Item No. 10 :- Testing, operating & tjrial of pumping machinery & allied equipments etc. complete.

Item No. 11:_ Providing, installing ,comm. With test & trial of C.C.foundation block etc comp.(As per R.A)

Item No. 12 :- Providing set of tools as per detailed specifications etc.

Item No. 13 :- Providing, installing, commissioning with test & trial internal electrification arrangement with suitable size wire laying in PVC conduit with one plug, fluorescent tube, street light board & switches etc. complete.

Item No. 14 :- Providing & fitting T.W. varnished plank 20mm thick fixed to wall for M.S.E.B. connection etc. complete.

I/15:AMR Bulk flow meter: Providing,erecting,commissioning & testing of 150mm in line battery operated ultrasonic bulk type flow meter as per ISO-4064 with built in data logger and GSM/ GPRS modem for transfer of data communication to remote central computer as per working on following condition and specifications. The meter shall be suitable for 50 degree centigrade and provided with IP-68 protection class with complete immersion of water.The meter shall have battery life of min-10years should be able to detect the reverse flow volume and tampering .The accuracy of meter shall be +/- 1% of measured value including 36 months guarentee etc comp (with simcard and its charges valid for 36 months) (As per R.A)

Item No. 16 :-150 mm dia Mechanical Joints:-Providing,erecting,commissioning & testing 80mm dia Mechanical joints for fixing meter to pipeline etc.(As Per RA)

I/17:- Automatic Control unit:- Providing,erecting,commissioning & testing Automatic Control unit (Robocop) suitable for two pumps (1+1 Standbye) etc comp.& as per detailed specifications. (As per RA)

Subwork No: 8 - Providing , installing , comm. & testing of Sub.(Mono)Pump set & allied works for Zone-5 GSR, Tal :Malvan,Dist:-Sindhudurg (AS per DSR MJP(M&C) 2021-22/PWD 2020-21)

Item No.l :- Providing, installing, commissioning with testing Sub. (Mono) pump set capable of 35264.73 LPH water aginst a total head of 15 mtr. from all causes when running @ 2900 rpm etc. complete. (HP 5.0)

Item No.2 :- Providing, erecting, commissioning with test & trial floor mounting L.T.Panel board (Cubical Box type)with required accessories etc. complete.

Item No.3 (a) :- Providing erecting & testing of 100mm dia sluice valve (PN-1) with hand wheel etc. complete.

Item No.3 (b) :- Providing erecting & testing of 100mm dia Reflux valve (PN-1) etc. complete.

Item No.4 (a) :- Providing erecting & testing of 100mm dia G.I..D./F Vertical drop pipes etc. complete.

Item No.4 (b) :- Providing erecting & testing of 100mm dia flanged joints to G.I./M.S./D/F pipes etc. complete.

Item No.5:- Providing , erecting , jointing & testing of required size M.S.D/F pipes & Specials etc comp.

Item No. 6 :- Providing,installing, commissioning with test & trial pressure guage arrangement etc. complete.

Item No. 7(a) :- Providing, laying, jointing & testing of PVC waterproof Sub. cable (1x3x2.5) sqmm etc. complete.

Item No. 7 (b) :- Providing, laying, jointing & testing of PVC armoured cable (1x4x6) sqmm etc. complete.

Item No.7(c):-Excavation of trenches in any type of strata of suitable width , depth for laying providing cable & refilling the same with excavated material etc comp

Item No.7(d):-Supply of PVC conduit pipe etc comp.

Item No. 8) :- Providing, installing commissioning with testing of earthing arrangement to the installation of motor, panel etc. complete.

Item No.9 :- Providing, erecting & testing tripple spur gear type chain pulley block suitable for (1 ton) capacity etc. complete.

Item No. 10 :- Testing, operating & tjrial of pumping machinery & allied equipments etc. complete.

Item No. 11:_ Providing, installing ,comm. With test & trial of C.C.foundation block etc comp.(As per R.A)

Item No. 12 :- Providing set of tools as per detailed specifications etc.

Item No. 13 :- Providing, installing, commissioning with test & trial internal electrification arrangement with suitable size wire laying in PVC conduit with one plug, fluorescent tube, street light board & switches etc. complete.

Item No. 14 :- Providing & fitting T.W. varnished plank 20mm thick fixed to wall for M.S.E.B. connection etc. complete.

I/15:AMR Bulk flow meter: Providing,erecting,commissioning & testing of 150mm in line battery operated ultrasonic bulk type flow meter as per ISO-4064 with built in data logger and GSM/ GPRS modem for transfer of data communication to remote central computer as per working on following condition and specifications. The meter shall be suitable for 50 degree centigrade and provided with IP-68 protection class with complete immersion of water.The meter shall have battery life of min-10years should be able to detect the reverse flow volume and tampering .The accuracy of meter shall be +/- 1% of measured value including 36 months guarentee etc comp (with simcard and its charges valid for 36 months) (As per R.A)

Item No. 16 :-150 mm dia Mechanical Joints:-Providing,erecting,commissioning & testing 150mm dia Mechanical joints for fixing meter to pipeline etc.(As Per RA)

I/17:- Automatic Control unit:- Providing,erecting,commissioning & testing Automatic Control unit (Robocop) suitable for two pumps (1+1 Standbye) etc comp.& as per detailed specifications. (As per RA)

Sub work- 9 PURE WATER FEEDER MAINS

Providing and Supplying ISI mark D.I. S & S pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutory duties and taxes levied by Gol and GoM in all respect, Education cess, VAT, Third party inspection charges of TPI agency approved by MJP including Transit insurance, Railway freight unloading from Railway wagon, loading into trucks, transportation to departmental stores / site of work, unloading stacking etc. completed as directed by Engineer-in-charge (IS:8329/2000 for pipee and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gasskets. DI K-9 150 mm dia

DI K-7 200 mm dia

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete. As per IS 9523 For all types of specials, bends, tees etc. 80 to 300mm dia

Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. PN-1.0 with bypass araengement 150 mm dia

200 mm dia

Providing & fixing in position & jointing high performance C.I. Air valves for water combination type(Kinetic air valve along with automatic air valves) double ball,double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release & anti vaccum application designed for 16 kg.Per sq.cm. working pressure &tested for 20 for kg per sq.cm.pressure. (Rate to include cost of gaskets, bolt, nut & any other material required for jointing & its transportation etc. including all taxes & duties except octroi) 1. C.I. ARV FLFF PN 1.6 50mm Dia.

Designing, supplying, installing, commisioning & testing of Flow Control Valve on the pipeline 100 mm dia

150 mm dia

B AVERAGE Excavation and other labour part excavation per foundation / pipe trenches in earth soil of all types sand graval and soft murum (BDA 1/259) mgp dsr 21-22 sec- E - 1 - pg n. 42 hard murum (BDA 1/259) mgp dsr 21-22 sec- E - 2 - pg n. 42 laterite rock (BDA 1/259) mgp dsr 21-22 sec- E- 8 - pg n. 43

Cutting and chamfering of pipes of following dia including cost of all materials and labour involved etc. complete as directed by Emgineer in charge (For all class of pipes) 150 mm dia

200 mm dia

Lowering, laying and jointing with SBR rubber gasket CI S/S pipes of various class with CI/ MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from store to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete. CI LA class/ DI K-7 & K-9 class 150 mm dia

200 mm dia

Lowering, laying and jointing in position following C.I.D.F. reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 150 mm dia

200 mm dia

Providing and fixing in position air valve shaft including providing and fixing GI Medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 Concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) A) Foundation on Murum and Hard Strata i) Upto 150 mm dia pipe line

ii) 200 to 400 mm dia pipe line

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 for PCC

Providing and constructing BB masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation, BB masonry in CM 1:5 proportion 12mm thick cement plaster in CM 1:4 proportion on both sides and providing and fixing frame and cover etc. complete as directed by Engineer-in-charge Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 1.2 X 1.2 m internal size and depth up to 1.5 m

Providing and laying in situ Cement Concrete of trap / granite / quatzite / gneiss metal for RCC works in foundation like raft, grillage strip foundation and footing of RCC columns and steel stanchions including normal dewatering formwork compaction, finishing and curing etc. complete. (By weigh batching and mix design for M 250 and M 300 only. Use of L and T, ACC, Ambuja, Birla gold, manikand, rajashree etc. cement is permitted ) RCC M 200 grade Foundation

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footing, foundations, \slabs, beams, columns, canopies,staircase, newels, chajjas, lintels, pardies coping, fins, arches, etc as per detailed drawings and schedules; including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required, complete.(including cost of binding wire) Tor Steel

Road crossing Manufacturing, providing and supplying spirally welded/ERW/SAW/ fabricated M.S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, track welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming 'V' edge on both ends of pipes including all taxes (Central & local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores/ site, unloading, stacking, etc, complete as per IS- 3589 and IS- 5504 as applicable as per specifications (No negative tolerance in thickness is permissible). (9mm Thck - 9343, 10 mm thk - 10406 , differance - 1063, for 1 mm - 1063 Rs. 1x 6 =1063x 6= 6378; 6378+10406=16784 Rs.) 400 mm dia ID (16 mm thk)

Pushing of M.S. Pipe of following dia. For road crossing & Railway Crossing by push through method in all types of strata by using hydraulic jack & drilling machine of required diameter below M.S. casing pipe lowering,laying,jointing of material,required welding machinery,tripod, chain pulley block, crane blower compressor, loading & unloading of machinery in to the trench etc. transportation & dewatering etc.complete as directed by Engineer-in-charge but excluding cost of M.S. pipes. a) 200mm to 499 mm dia. M.S. pipe

Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil)

Disposal of excavated stuff at 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Sub work 10 - RAW WATER GRAVITY MAIN FROM CHEMBER TO DHAMAPUR JACKWELL

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi tion/revision with amendments for Rubber Gaskets. 400 MM DIK-7

Providind erecting Cast Steel/Spheroidal Graphite (S.G.) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware & packing) water works quality,having non-rising spindle with hand wheel & without bypass arrangement, spindle of stainless steel as per requirement, excluding C.C. foundation/ structural steel support. 400mm dia

Providing & fixing in position & jointing high performance C.I. Air valves for water combination type(Kinetic air valve along with automatic air valves) double ball,double orifice with stainless steel ball, tamper proof air vents rolling seal mechanism for air release & anti vaccum application designed for 16 kg.Per sq.cm. working pressure &tested for 20 for kg per sq.cm.pressure. (Rate to include cost of gaskets, bolt, nut & any other material required for jointing & its transportation etc. including all taxes & duties except octroi) 1. C.I. ARV FLFF PN 1.6 100mm Dia.

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc.

Air Cusion Vales

B AVERAGE Excavation and other labour part excavation per foundation / pipe trenches in earth soil of all types sand graval and soft murum (BDA 1/259) mgp dsr 21-22 sec- E - 1 - pg n. 42 400 MM DIK-7 hard murum (BDA 1/259) mgp dsr 21-22 sec- E - 2 - pg n. 42 400 MM DIK-7 laterite rock (BDA 1/259) mgp dsr 21-22 sec- E- 8 - pg n. 43 400 MM DIK-7

Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. 400 MM DIK-7

Lowering, laying and jointing in position following C.I.D.F. reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 400mm dia

Providing and fixing in position air valve shaft including providing and fixing GI Medium class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 Concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) A) Foundation on Murum and Hard Strata ii) 200 to 400 mm dia pipe line

Providing and laying in situ Cement concrete of trap/ granite/ quartzite/ gneiss metal for PCC work below foundation and footing including normal dewatering, plywood form work, compaction, finishing and curing, etc. complete. M15 for PCC

Providing and constructing BB masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation, BB masonry in CM 1:5 proportion 12mm thick cement plaster in CM 1:4 proportion on both sides and providing and fixing frame and cover etc. complete as directed by Engineer-in-charge Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 1.5 X 1.5 m internal size and depth up to 1.5 m

Providing and laying in situ Cement Concrete of trap / granite / quatzite / gneiss metal for RCC works in foundation like raft, grillage strip foundation and footing of RCC columns and steel stanchions including normal dewatering formwork compaction, finishing and curing etc. complete. (By weigh batching and mix design for M 250 and M 300 only. Use of L and T, ACC, Ambuja, Birla gold, manikand, rajashree etc. cement is permitted ) RCC M 200 grade

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footing, foundations, \slabs, beams, columns, canopies,staircase, newels, chajjas, lintels, pardies coping, fins, arches, etc as per detailed drawings and schedules; including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required, complete.(including cost of binding wire) Tor Steel

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 400 MM DIK-7

Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil)

Disposal of excavated stuff at 3 Km lead including all labours, loading and unloading and as directed by Engineer-in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Sub Work 10(1) collecting chamber

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259)

Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264)

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)

Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)for Raft 300

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete brick masonary

Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) M 250 beam

Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S or Tor reinforcement) slab M 25

Providing hoisting and fixing in position inverted j type CI caul ventilater alluminium mesh at top in including applying 2 coats of anti-corrosive paint, etc complete as directed by engineer incharge, weight not less than 35 kg

Providing and fixing in position M.S. ladder 0.50 M wide consisting of 75 x 10 mm M.S. flats as stringers and 16 mm dia M.S. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coats of anticorrosive paint, etc. complete as directed by Engineer-in-charge.

Sub Work 10(2) Pumping Station

Submersible Monoblock Pump set :- H=10 mtr, Q= 31080.85LPH, HP=10

Sub Work 10(3) Jackwell Repair And Maintance

Desilting the Supply Well, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A?9/261)

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc, complete

Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications. As directed by Engineer in charge.

Providing and fixing in position U.P.V.C. (Unplasticized Poly Vinyl Chloride) having multi?chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x 60) mm with steel reinforcement, multi?chambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including alluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets,silicon sealent,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. complete.

Providing and laying 18 mm thick ADONI BROWN LEATHER FINISH stone for flooring, In Rs. machine cut in required size, approved shade, color and texture laid using white cement slurry over 20 mm (average) thick base of cement mortar 1:4 followed by laying, fixing and jointed with white cement slurry mixed with matching pigment, including rubbing and curing moulding and polishing to edge to give high gloss finish etc complete. The application rate for tile adhesives shall be as per manufacturer's recommendations. as per detail drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels and as directed by Engineer in charge. Complete. a) Flooring

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear)

Providing and fabricating structural steel work for Sakav Decking in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC / CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water system. The cost shall include testing of all materials, Inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete as specified and directed. for flexible hose pipe 315 mm PN 10 (SDR 13.6)

Sub work no-11 PROVIDING AND CONSTRUCTING ESR

Designing (aesthetically), and constructing RCC elevated service rservoir of following capacity with RCC staging consiting of columns, internal and extranal bracings, spaced vertically not more than 4.5 meters c/c for ESR having capacity 500 Cum and not more than 6 m c/c for ESR having capacity above 500 Cum including excavtion in all type of starata , founation, concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposal of surplus stuff with in a lead of 50 m , all lablours and material charges including lowering, laying , erecting hoisting and jointing of pipe assembly of inlet, outlet, washout , overflow and bypass arrangement as per approved design. Providing and fixing accessries such as Statinless Steel ladder, CI manhole frame and covers, water level indicator, lighting conductor, GI pipe riling around walkway and top slab, providing spiral stairecase from GL to roof level MS grill gate of 2.0m height with locking arrangement of approved design, BB masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylic emulsion with silicon additives paint to the structure including roof slab epoxy painting to the internal surface & anti termite for undrground parts of the structure and giving satisfactory water tightness test as per IS code etc complete as per the direction of enginneer in charge.The job to include painting the name of the scheme and other details on the reservoir as per the direction of Engineer-in-chage Zone-3, 610000 L 20 mt height Note- 1) The design of the structure be in accordance with relevant IS 3370-1965 or revised code 2) The design shall satisfy the stipulations as per IS 1893/1984 & IS 13920/1993 for seismic force & IS 11682/1985 for RCC stagging of overhead tanks 3) For design having more than 6 columns, provision of internal bracing is obligatory. External bracing is also obligatory 4) The entire structure shall be constructed in M300 only 5) Plain round mild steel bars grade-I confirming to IS 432, part-I or high yield strength deformed bars confirming to IS 1786 or IS 1139 shall be used. Grade-II mild steel bars will not be allowed 6) Irresctive of the type of foundation proposed in the design, one set of bracing be provided at the ground level as per detailed estimate

Zone-4, 210000 L 20 mt height

Providing & supplynig ISI standard C.I. double flanged pipes including all statutory duties and taxes such as GST levied by GOI & GOM in all respect, railway, freight, insurance, unloading from railway wagon oading into truck transport to stores/ site, unloading etc. complete as directed by Enginnerin-charge. CI Double Flanged Pipe 150 mm dia

CI Double Flanged Pipe 200 mm dia

Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. D.I. Pipe D/F 150 mm

D.I. Pipe D/F 200 mm

D.I. Pipe D/F 300 mm

Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. PN-1.0 Sluice valves - PN -1.0 (With by pass arrangement) 150mm dia

Sluice valves 200 mm

Sluice valves 300 mm

Providing and supplying ISI Standard CI Flanged / S&S specials including all taxes (Central & Local), Railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store/ site, unloading stacking etc. complete,D/ F Specials 80 mm to 300 mm dia

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete. As per IS 9523 For all types of specials, bends, tees etc.80 to 300mm dia

Providing fusion bonded epoxy coating to reinforcement bars as per IS - 13620-993 specification for a thickness of 175 (+_ 50) microns including extra cost on account of careful handling,extra cost on account of using PVC coated binding wire instead of GI wire extra cost on account of touch-up material supplied by coating agency and repair work extra cost on account of transportation to and fro from steel yard @ kalmaboli to plant at Daman and Plant at Daman to work site by trailer, loading, unloading including all taxes (Central and Local) etc. complete. For @ Zone-3 ESR 0.61 ML 20 Mt Ht

For Zoe-3 ESR 0.21 ML 20 Mt Ht

Lead Charges i) Sand (For 21 km) For @ Zone-3 ESR 0.61 ML 20 Mt Ht

For Zoe-3 ESR 0.21 ML 20 Mt Ht

ii)Metal (For 29 km) For @ Zone-3 ESR 0.61 ML 20 Mt Ht

For Zoe-3 ESR 0.21 ML 20 Mt Ht

Sub Work No-12 PROVIDING AND CONSTRUCTING GSR FOR ZONE-5

Designing (aesthetically), and constructing RCC ground service Reservoirs/ RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab/ or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./M.S. D/F. pipes specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti termite treatment shall be given for underground portion of the structure. The designing shall be in accordance with various relevant I.S. specification (I.S. 456/1978, I.S. 875 - 1987, I.S. 3370-1965 or revised.) and other Detailed note as per estimate Seismic zone III Zone-5, 240000 L & water depth 3 mtr

Providing & supplynig ISI standard C.I. double flanged pipes including all statutory duties and taxes such as GST levied by GOI & GOM in all respect, railway, freight, insurance, unloading from railway wagon oading into truck transport to stores/ site, unloading etc. complete as directed by Enginnerin-charge.CI Double Flanged Pipe150 mm dia

CI Double Flanged Pipe 200 mm dia

Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. PN-1.0 150 mm dia

200 mm dia

Providing and supplying ISI Standard CI Flanged / S&S specials including all taxes (Central & Local), Railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store/ site, unloading stacking etc. complete,D/ F Specials 80 mm to 300 mm dia

Providing fusion bonded epoxy coating to reinforcement bars as per IS - 13620-993 specification for a thickness of 175 (+_ 50) microns including extra cost on account of careful handling,extra cost on account of using PVC coated binding wire instead of GI wire extra cost on account of touch-up material supplied by coating agency and repair work extra cost on account of transportation to and fro from steel yard @ kalmaboli to plant at Daman and Plant at Daman to work site by trailer, loading, unloading including all taxes (Central and Local) etc. complete. For @ Zone-5 GSR 0.24 ML

Lead Charges i) Sand (For 21 km)

Lead Chargesii)Metal (For 29 km) For @ Zone-5 GSR 0.24 ML

Sub Work No-13 WATER SUPPLY DISTRIBUTION SYSTEM

Providing and Suplying in standard lengths Polyethylene pipes, confirming to IS: 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechnaical connectores i.e. thread / Insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes, transportation & freight charges, conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains, etc. Class- PE-100 (6 Kg/Sq.Cm) 110 mm dia

Class- PE-100 (6 Kg/Sq.Cm) 160 mm dia

Providing and Supplying ISI mark D.I. S & S pipes (push on joints pressure pipes of D.I. K-7 of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) including all statutory duties and taxes levied by Gol and GoM in all respect, Education cess, VAT, Third party inspection charges of TPI agency approved by MJP including Transit insurance, Railway freight unloading from Railway wagon, loading into trucks, transportation to departmental stores / site of work, unloading stacking etc. completed as directed by Engineer-in-charge (IS:8329/2000 for pipee and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gasskets. DI K-7 200 mm dia

300 mm dia

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading, unloading including all taxes, etc. complete. As per IS 9523 For all types of specials, bends, tees etc. 80 to 300mm dia

Providing & Supply of Electro Fusion Fittings in accordance with B EN 12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded with PE80/ PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central, state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Couplers Couplers 110

Couplers 160

Equal Tee 110

Equal Tee 160

Elbow 90 Deg. 110

Elbow 90 Deg. 160

Elbow 45 Deg. 110

Elbow 45 Deg. 160

Reducer 110X75

Reducer 110X90

Reducer 160X90

Reducer 160X110

End Cap 110

End Cap 160

Ferrule tapping tee 110 x 1/2"

Ferrule tapping tee 110 x 3/4"

Ferrule tapping tee 110 x 1"

Ferrule tapping tee 110 x 1 %"

Ferrule tapping tee 100 x 1^"

Ferrule tapping tee 110 x 2"

Ferrule tapping tee 160 x 1/2"

Ferrule tapping tee 160 x 3/4"

Ferrule tapping tee 160 x 1 "

Ferrule tapping tee 160 x 1%"

Ferrule tapping tee 160 x 1^"

Ferrule tapping tee 160 x 2"

Providing double flange sluice valve confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. PN-1.0 80 mm dia

100 mm dia

150 mm dia

200 mm dia

300 mm dia

Providing and Supplying Pressure Reducing Valves (PRV) confirming to IS / BIS and as per detailed specification including all fixtures etc., complete as per drawings and specifications and as directed by Engineer. 100 mm dia

200 mm dia

B - AVERAGE Excavation and other labour part Excavation for foundation / pipe trenches in all types of starta by mechanical or manual means including, blasting, trimming and leveling the bed where necessry and removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259) sec- E - 1-42 hard murum (BDA 1/259) mgp dsr 21-22 sec- E - 3 -42 hard rock and concrit road by chiselling (BDA 1/259) mgp dsr 21-22 sec- E - 7 - pg n. 43 laterite rock (BDA 1/259) mgp dsr 21-22 sec- E- 8 - pg n. 43

Lowering, laying and jointing HDPE / MDPE pipes in proper position including all specials by compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as per relevent IS Code complete with all materials for jointing procedures like Electrofusion machine, Electric mirror/heater /But fusion welding machine with hydraulic jack, top loading clamp etc pump and accessories for hydraulic testing and all labours as directed by Engineer-in-charge as per IS-7634 Part II. 110mm dia

160 mm dia

Cutting and chamfering of pipes of following dia including cost of all materials and labour involved etc. complete as directed by Engineer in charge (For all class of pipes) 200 mm dia

300 mm dia

Lowering, laying and jointing with SBR rubber gasket CI S/S pipes of various class with CI/ MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-Charge including conveyance of material from store to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete. 200 mm dia

300 mm dia

Lowering, laying and jointing in position following C.I.D.F. reflux valves, butterfly valves and sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 80 mm dia

100 mm dia

150 mm dia

200 mm dia

300 mm dia

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 for PCC

Providing and constructing BB masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation, BB masonry in CM 1:5 proportion 12mm thick cement plaster in CM 1:4 proportion on both sides and providing and fixing frame and cover etc. complete as directed by Engineer-in-charge Valve chamber with precast steel fibre reinforced concrete (SFRC) frame and cover 90 X 60 cm internal size and depth up to 1.2m

1.2 X 1.2 m internal size and depth up to 1.5m

Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, surcharging, etc. complete. Compaction should be at least 95% of M.D.D. Total excavation - (pipe volume + loose soil)

Disposal of excaveated stuff within 3 Km lead including all labours, loading and unloading and as directed by Engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 encasing for road crossing

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.

Sub work No-14 Bulk Meters To Water Supply System

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259)

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M

Cutting and chamfering of pipes of following dia including cost of all materials and labour involved etc. complete as directed by Engineer in charge (For all class of pipes)100 mm dia Nominal Dia

200 mm dia Nominal Dia

Supply of CI Mechanical compression collar coupling suitable for C.I. spun pipes (as per IS-1536/2001) and complete with sealing rubber gasket of SBR, C.I., follower giands and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538/1993)100 mm dia Nominal Dia

200 mm dia Nominal Dia

Providing and supplying ISI standerd M.S. specials of required thickness with 3 coats of approved make epoxy paint ( Shalimar, Ciba or Mahindra & Mahindra Make) from inside and outside including all taxes (Central and Local) octroi inspection charges transportation to stores / site & stocking etc. complete. Plain ended specials or socketed branch flanged specials.(MS tail piece and flange)

Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S, or Tor reinforcement). For RCC M-200 grade Foundation AMR Bulk Meters

Providing, installing testing & commissioning of line battery operated ultrasonic bulk type water meters ISO 4064 with built in data logger and GSM/ GPRS modern for transfer of data communication to remote central computer as per working on following conditions and specifications. The meter shall be suitable for 50 degree C and provided with IP 68 protection class with complete immersion of water. The meter shall have battery life of min. 10 years should be able to detect the reverse flow volume and tampering. The accuracy of the meter shall be +/- 1% of measured value including 36 months guarantee etc complete.I) Supply only (With simcard & its charges, valid for 36 months) a)100mm Nominal diameter flow Mt

ii) Erection only a)100mm Nominal diameter flow Mt

Manufacture supply and commission of Electromagnetic flow meter(EMF) for row/ pure water with accuracy 0.5% of measured value and protection as per given specifications for size 10mm - 1000mm. Including sensor, trasmitter, surge arrestor, 25mtere sensor/ transmitter cable, GI duct of suaitable size for 25 mtrs/ each flow meter including pipe cutting, levelling and installation of flow meter in pipe lines with necessary tool tackles cranes etc. as may be required at site and based on technical specification etc. as per attached I) Supply only c)200mm Nominal diameter flow Mt

ii) Errection only c)200mm Nominal diameter flow Mt

Pressure tranducer, which should be connected to the pressure lead of dual channel loggers. The pressure transducer shall be compactible with dual path channel loggers.

Coil cable of following specifications: 3*0.75mm2 PVC cable with common, braided copper shield (-7mm dia) Conductor resistance : </=37 Ohm/Km- Capacitance : core / core, shield grounded :</=120 P F/m- permanent operating temprature: -20+/-80 Deg C

Pressure Transmitter cable of following specifications: 3*0.75 mm2 PVC cable with common,braided copper shield (-7 mm dia) Conductor resistance : </=37 Ohm/Km- Capacitance : core / core, shield grounded :</=120 P F/m- permanent operating temprature: -20.....0+80 Deg C

GI duct of 100mm with suitable rating for laying under ground with all necessary fittings

Flow meter chamber works 1.2 X 1.2 X 1.2m

Sub Work No-15 AUTOMATION & SCADA

MBR/ESR (5 ESR+0MBR) Ultrasonic Level Transmitter Designing, Supplying, installing, commissioning & testing of following equipments with satisfactory test & trial etc. Medium- Water Range- 0-5 mtrs Output- 4-20mA Power Supply- 24V DC ext. Display- Large LED Accuracy - +/- 0.25% of full scale or better Enclosure- IP 65

Solar Panel with Battery Designing, supplying, installing, commissiong & testing of photovoltaic solar panel with its charger suitable to water level transmitter ( for continuous functionary) including supplying and M.S. mounting clamps with hardware for transmitter. Supplying and erecting of M.S. stand for mounting solar panel so as to have maximum exposure of sunlight for desired location and maintenance free battery of 12 VDC @ 18 Ah suitable to transmitter etc.

ESR management System (RMS) Designing, supplying, installing, commissiong & testing of flow control valve for inlet with flow measuring, flow controlling, pressure monitoring & web based isolating valve with solar panel, Antenna with cable etc. 150 mm dia

200 mm dia

SCADA Software Supply, installation, testing, terminating & interfacing software Design to PLC and commissioning of SCADA software: Development version with unlimited tags etc.

Interfacing Centralize Computer Stations Supply, installation, testing, terminating & interfacing centralised computer station centralised computer station etc.

46" LCD monitor Supply, installation, testing, Intgeration & commissioning of 46" LCD monitor at Conf. Room for display of total water system (online)

SUBSTATION Supplying and erecting ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394.00 kg/km) as per specification No. OH-CON/ACSR Rate quotation from MSCDCL

Sub Work No-17 Micro Hydro Power Plant at WTP Campus (40.4Kw)

Providing and installing Micro Hydro Power Plant at WTP Campus of 40.40 KW.with following data.

Sub Work No-18 ROAD REINSTATING BT road

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means -Grading I (Using Screening Type B (11.2 mm) Aggregate)

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates)

Sub Work No- 18 (1) Road Restoration CC Road

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast insitu/Ready Mix cement concrete M-15 of trap/granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast insitu / Ready Mix cement concrete in M20 of trap / granite / quartzite / gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying /pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic microprocessor based PLC without SCADA enabled reversible Drum Type mixer etc. complete, With fine aggregate (Crushed sand VSI Grade)

Sub Work No-19 TRIAL RUN

Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessar personel such as operator, valveman, etc. as per requirements f the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Note: Required chemicals to be supplied by Department free of cost and electricity bill also be paid by the department. for regional scheme upto 3 villages trial period shall be 3 months with raw water pumping, one treatment plant with pumps, raw water pumping main, leading main, ESR, BPT and distribution system, etc. (For one year) (For 12 Months) without WTP.

Sub Work No-20 Construction of bridge At over Nalla

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.

Providing dry / trap / granite / quartzite / gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc.(RA)

Providing and laying Cast insitu / Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for steps including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finish in gun even and honey combed surf ace and curing etc. complete. The Cement Mortar 1:3 plaster is consider ed for rendering uneven and honey combed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tar pau lin etc. (Wooden centering will not be allowed.), with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast insitu / Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. column sand steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fullyautomatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) M 25 Foundation

Providing and laying insitu / ready mix control led grade of M25 of trap / granite / quartzite / gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic microprocessor based PLC with SCADA enabled with reversible drum type mixer / concrete batch mix plant (pan mixer) with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc), excluding reinforcement) M 25 Wall

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footing, foundations, \slabs, beams, columns, canopies,staircase, newels, chajjas, lintels, pardies coping, fins, arches, etc as per detailed drawings and schedules; including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required, complete.(including cost of binding wire)

Providing sand faced plaster externally incement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using water proof ing compound at 1kg percement bag curing the same for not less than 2 day sand keeping the surface of the base coat rough to receive the sand face d treatment 6 to 8 mm thickince ment mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and ofa pproved colour to the plastere d surfaces including cleaning, preparing the plaster surface, applying prime rcoat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE:For Item No.15 to18 prior approval of Superintending Engineer will be necessary same as plaster

Providing structural steel work in trusses, other similar trussed purlin sand member swith all bracing, gusset plates etc. as per detailed design sand drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted / bolted / welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing and applying two coats of lead / zinc base oil paint / bituminious paint of approved colour to new structural steel work and iron work in buildings ncluding scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat).

Providing and fixing 45cm wide mild steel ladder of 40mm x 6mm mild steel flat stringer sand steps of 18mm dia. Mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (AntiCorossive Paint)

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bund setc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle por- tion with B. C. soil (in gunny bags if requried). Providing imper- vious / semipervious materials on both side of B.C. soil (in gunny bags if required) including ramming, compacting to the satisfac- tion of Engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the Engineer-in-charge.

Subwork No-21 : Shifting of Utilities

Providing ISI mark G.I.pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below. MEDIUM 25 mm

Providing ISI mark G.I.pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below. MEDIUM 40 mm

Providing ISI mark G.I.pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004. Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below. MEDIUM 50 mm

Providing and supplying ISI mark C.I. S & S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance ,Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work, unloading, stacking etc. completed as directed by Engineer–in-charge (IS 1536/2001 for pipes and IS158 / 1969 and IS12820/1989 or latest edition / revision with amendments for Rubber Gaskets. Class LA 80 mm

Providing and supplying ISI mark C.I. S & S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance ,Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work, unloading, stacking etc. completed as directed by Engineer–in-charge (IS 1536/2001 for pipes and IS158 / 1969 and IS12820/1989 or latest edition / revision with amendments for Rubber Gaskets. Class LA 100 mm

Providing and supplying ISI mark C.I. S & S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance ,Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work, unloading, stacking etc. completed as directed by Engineer–in-charge (IS 1536/2001 for pipes and IS158 / 1969 and IS12820/1989 or latest edition / revision with amendments for Rubber Gaskets. Class LA 150 mm

Providing and supplying ISI mark C.I. S & S pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GoI and GoM in all respect, Third party inspection charges of TPI Agency approved by MJP including Transit insurance ,Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work, unloading, stacking etc. completed as directed by Engineer–in-charge (IS 1536/2001 for pipes and IS158 / 1969 and IS12820/1989 or latest edition / revision with amendments for Rubber Gaskets. Class LA 200 mm

Providing and supplying ISI standard CI flanged / S& S specials including all statutory duties & taxes such as GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store /site, unloading stacking etc. complete. 80 to 300 mm

Providing and supplying ISI standard CI flanged / S& S specials including all statutory duties & taxes such as GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store /site, unloading stacking etc. complete. 350 mm and above

Dismentling brick masonary in lime or cement morter and stacking the materials as directed with all leads, lifts complete. Spec.No.: As directed by Engineer in charge.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5 core,35 sq.mm.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5 core,70 sq.mm.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5 core,95 sq.mm.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5 core,120 sq.mm.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5 core,150 sq.mm.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5core,240 sq.mm.

Supplying &Erecting XLPE/PVC Insulated, armoured cable 22000 V Grade with ISI mark three core,solid/standrad aluminium conductor with 6 mm thick 25 mm wide M.S. Spacer with G.I. Earth wire 6 sq.mm. complete erected on wall/on pole with x+C289 mm clamps or in provided trench in an approved manner. 3.5 core,300 sq.mm.

Providing cable joining kit with cable joining compound for straight through joint for 22 KV XLPE screened 3 core cable 25-50 sq mm.

Providing cable joining kit with cable joining compound for straight through joint for 22 KV XLPE screened 3 core cable 70-95 sq mm.

Providing cable joining kit with cable joining compound for straight through joint for 22 KV XLPE screened 3 core cable 120-185 sq mm.

Providing cable joining kit with cable joining compound for straight through joint for 22 KV XLPE screened 3 core cable 185-240 sq mm.

Providing cable joining kit with cable joining compound for straight through joint for 22 KV XLPE screened 3 core cable 300-400 sq mm.

Providing and fixing Retro Reflectorised 600 mm. Cautionary warning sign boards made out of retro reflective sheeting of high intensity prismatic grade confirming to IRC_67 2012 & type IV standards of ASTM D4956.09 specifications fixed over 2 mm thick A1/4 mm. thick ACP SHEET supported with back support frame of 25 X 25 X 3 mm. M. S. angle as approved, supported on a M. S. angle iron post of size 75 X 75 X 6 mm. 3.5 M hight, long duly pointed with synthetic enamel paint alternate black and white band of 25 cm. of including G.I fixtures, fixing the board in 1:4:8 concrete block of size 45 X 45 X 60 cm. including transportation etc. complete. 7 years Warrenty for Retro Reflective Sheet mandatory boards of 60 cm. Diameter.

Supplying & Erecting Jelly field armoured telephone cable 20 pair with 0.5 mm. dia laid in provided trench as per specification number WG TW

Supplying & Erecting Jelly field armoured telephone cable 50 pair with 0.5 mm. dia laid in provided trench as per specification number WG TW

Supplying & Erecting Jelly field armoured telephone cable 100 pair with 0.5 mm. dia laid in provided trench as per specification number WG TW

Optical Fibre Supplying & Erecting LSZH armoured multimode optical fiber cable with 12 fibres, with core dia of 50/125 micrometre (OM4) suitable for 1 GBPS with ethernet distance 850 mm. of wavelength on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC

Supplying & Erecting LSZH armoured multimode optical fiber cable with 24 fibres, with core dia of 50/125 micrometre (OM4) suitable for 1 GBPS with ethernet distance 850 mm. of wavelength on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC

ARIHANT CONSTRUCTIONS

M/s. Dipak J Bhivare