WELCOME MAINT INCL PETTY REPAIRS AT SECT D UNDER AGE B/R-I AT DINJAN MIL STN

M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by complete removal of existing treatment including chalk whiting on wall etc and applying two coat of distemper oil emulsion over a coat of chalk whiting primer for distemper including 1.5mm thick wall care putty complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or untreated surfaces of wood of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint all as specified and as directed. Note for Ser Items No 1 to 9 : Rates have been deemed to be included for Ladders, Brushes/Rolers, Buckets etc. and no building furniture will be used while working failing whicj Rs 1000/-/Per day/Per Qtr will be deducted from contractor due payment . Floor/Wall area have to be cleaned after completion of work.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10mm thick and 5mm thick) in cement mortar in (1:4) using water proofing compound in top layer and finished even and smooth without using extra lime or cement complete all as specified and directed. Note: Water Proofing Compound will be measured and paid separately.

M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings (sunshed, chajja, fins etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid Water Proofing Compound of approved make compile all as specified and directed

M&L for preparation of plastered surfaces of wall and applying 3 mm thick wall care putty to a smooth surface complete all as specified and as directed.

M&L for preparation of plastered surfaces of ceiling and applying 3 mm thick wall care putty to a smooth surface complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over one coat of alkali resistent primer complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls, etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over chalk whiting complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling etc and applying three coats of white wash complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, removing rubbish off the premises etc incl cutting of reinforcement to facilitate demolition complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4) (Nominal Mix) (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, etc complete all as specified and as directed. Note : Reinforcement will be measured and paid seperately

M&L for form work to soffits of suspended slabs such as roof slab landings and similar works not exceeding 200mm thick (horizontal or slopping) for fair finished surfaces of concrete flat complete all as specified and as directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks well burnt straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' well burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Refixing of shutters in existing location/ opening not exceeding 1 sqm each including resecuring or easing & adjusting also refixing existing serviceable builders hardware complete all as specified and directed.

Refixing of shutters in existing location/ opening exceeding 1 sqm but not exceeding 2sqm each including resecuring or easing & adjusting also refixing existing serviceable builders hardware complete all as specified and directed.

Dismantling of unframed timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.

M&L for Second class wrought hard wood well seasoned as in scantlings wrought timber fixed well seasoned complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue, pinned at joints duly treated with one coat of tar or coal tar Black paint, complete all as specified and directed.

M&L for 35 mm thick second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

Supply and fixing 30mm thick second class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauze etc, (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), complete all as specified and directed.

Supply and fixing 35mm thick second class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauze etc, (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), complete all as specified and directed.

S&F for 8 mm thick aluminuim duco grill size 75x75 mm fixed to windows or ventillators with aluminium flat 30x3mm complete all as specified and as directed.

Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete all as specified and directed.

M&L in repairs 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4 mm thick, figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 5.5 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including timber bead complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F 150 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F in repair 150 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F 100 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F in repairs 100 mm long, aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and as directed.

S&F 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F in repair 75 mm long, butt hinges, medium weight, cold rolled mild steel fixed to chowkats complete all as specified and directed

S&F 100 mm size, butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.

S&F in repair 100 mm size, butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.

S&F 100 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F in repairs 100 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F in repair 150 mm size, aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and as directed.

S&F in repairs 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers, etc as in curtain rail complete all as specified and as directed.

M&L for providing pelmet boxes in repair using 12mm thick particle board, medium density, flat pressed, single layer type with BWR type adhesive, fixed with screws complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl CM bedding (but not baking), removing serviceable tile to store and rubbish of the premises complete all as specified and directed

M&L for glazed, ceramic, coloured tiles of size 450mm x 350mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing coat in cement mortor (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing coat in cement mortor (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, including 15 mm thick screed bed or bedding in cement mortor (1:6) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for vitrified, ceramic, coloured (light shade) tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc, including 15 mm thick screed bed or bedding in cement mortar (1:6) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for vitrified, ceramic, coloured (light shade) tiles 10mm thick (square/ rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc, including 10 mm thick backing coat in cement mortar (1:4) and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for 20mm thick granite (of any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixure of pigment to match the shade of granite complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, footpath, etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) making impressions of expanded metal whilst the concrete is green complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and as directed.

M&L for 40 mm thick, plain cement concrete (1:2:4) type B-1 (using 12.5 mm graded stone aggregate) as in sub base finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe and incl 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe and incl 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repairs 20 mm bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks exc.250 Ltrs not exc. 500 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed.

M&L for cleaning and removing all scale and dirt, etc, from tanks exc.500 Ltrs not exc. 1000 Ltrs and from mouths of circulating pipes, etc. complete all as specified and as directed.

S&F in repair 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.

S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe providing 110mm PVC WC connector etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and as directed.

S&F in repairs plastic water closet, seat and cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repairs 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repairs 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail, D type, 60cm long, 20mm dia with brackets complete all as specified and as directed.

S&F in repairs soap dish vitreous china coloured approximate size(160X160X90mm) complete all as specified and as directed.

S&F in repairs vitreous china wash basin, size 550 x 400mm, white, flat back, excluding waste pipe, waste coupling, chain, plug and porcelean stopper & backets but including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

All as per item No 95 above but 20mm bore.

S&F in repairs 15 mm bore stop valves (concealed type), cast copper alloy, chromium plated with long shank and cup, screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

All as per item No 97 as above but 20mm bore.

S&F in repairs 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs, 15mm cromium plated bib taps, cast copper alloy with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15mm bore Brass CP single lever wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead Shower) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs brass cast copper alloy chromium plated shower rose, 125mm size with shower arm 15mm size, 195mm long with bend of 45 degree with flange complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed.

Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for re-use at same site or other site complete all as specified and as directed.

Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239(Part -2):2011 and fixtures complete fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.

S&F in repair toilet paper holder of vitreous china, fixed to walls with chromimum plated brass screws complete all as directed.

M&L in repair 75 mm dia outlet , PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F for grating doom, circular type, 100mm dia of PTMT, (mimimum weigh 25 gms) complete all as specified and as directed.

S&F for sink made of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia flexible PVC waste pipe, overall size 495X420 and bowl size 410X330X160mm all as directed.

S&F for sink with drainage board made of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia flexible PVC waste pipe, overall size 915X460 and bowl size 410X330X160mm all as directed.

M&L for cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed.

S&F for 375mm mild steel ordinary rat rail, rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches, floor complete all as specified and as directed.

S&F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches, floor complete all as specified and as directed.

S&F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) branch piece single (single Y) 110mm bore with access door complete as required and as specified and as directed.

S&F PVC (SWR) branch piece double (double Y) 110mm bore with access door complete as required and as specified and as directed.

S&F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) branch piece double (double T) 110mm bore with access door complete as required and as specified and as directed.

S&F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair PTMT(half or full threaded) waste coupling 32 mm for sink (min weight 32mm - 45gms/40mm - 60gms) complete all as specified and as directed.

All as per item No 128 here-in-above but 40mm

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings with ridges complete all as specified and as directed.

M&L for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with 'L' type or 'J'-type or cranked hook bolts, complete all as specified and as directed.

M&L for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with 'L' type or 'J' type hook or cranked hook bolt with washer complete all as specified and as directed.

S&F in repair 15 mm bore, self cleaning water jet, universal type, chromium plated with fixing accessories complete all as specified and as directed.

S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed.

S&F for 15mm dia angle stop cock with flange all as specified and as directed.

S&F for PVC corner shelf complete all as specified and as directed.

S&F for flexible PVC waste pipe of 32mm dia and 1.2 metre long each, fitted to basin or sink all as directed.

S&F in repair PVC mirror cabinet of size 440x325x120mm and fixed to wall complete all as specified and as directed.

S&F wall mixer 3-in-1 complete all as specified and directed (Cat Part No G0617A1) of Parryware or equivalent make as specified in PS.