GE (AF) MC/CHD/T-34/2026-27

M&L for Vitrified (selected quality) Ceramic tiles 8 to10 mm thick (square/ rectangular) polished including selective/dark colour motiff, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm over & including 15mm thick Screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes or chemical adhesive pating, set and jointed in neat cement slurry and pointed in white or coloured cement to match dismantling existing tile and removing the debris outside the defence land complete all as specified and as directed.Make:Orient ceramic/Sunflora Vertified /Kajaria etc.

Supply and fixing high quality decorative wall panelling using Charcoal panels 12 to 16mm thick solid, including necessary framework/back support, adhesives, edge finishing, cutting, alignment, and complete installation as per approved design and site requirements. The scope includes supply of all materials, accessories, hardware, transportation, tools, labour and incl taking down existing wall paneling required for a complete finished installation. Make : Mega Star/ ARISO Charcoal Wall Panels/ Euro Pratik or equivalent.

Taking down old aluminium door/window area exc 4.00 Sqm not exc 8.00 sqm complete all as specified and as directed by Engr-in-Charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions frames (Fixed portions)of any dark/wooden colour with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws. all complete as per architectural drawings and the directions of Engineer-in-Charge. Make:Jindal/ Saint Govind/ Ozone.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames,aluminium frame, steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 10mm thick toughened glass, fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed. Make : Glass: Saint Govind/ Ozone/ Modiguard.

Supply and fix 8mm thick toughened glass, fixed to frame/shutter for Aluminium door/window/partition etc including aluminium powder coated snap beading and rubber gasket, complete all as specified and directed. Make : Glass: Saint Govind/ Ozone/ Modiguard.

Material and labour, installing a fixed and openable frameless glass door system incl 10 mm thick toughened glass with etched panels without aluminium framing, including patch fittings, floor spring, hinges, handles, locking arrangement, necessary hardware, silicone sealant, cutting, alignment, testing, and complete installation as per approved design and site conditions and complete all as per Manufacturer instructions. The scope includes supply of all materials, accessories, transportation, tools, labour and taking down old existing door and finish the wall surface/floor surface smooth to fixed the new door to required for the complete finished work. Make : Glass: Godrej/ Saint Gobain/ Ozone/ Modiguard/ Dormakaba, complete all as specified and as directed.

Supply and fixing 3 to 4 mm thick ACP (Aluminium Composite Panel) sheet cladding at window and door edges in the foyer area to enhance the overall aesthetic appearance and achieve an elegant finish, including necessary framework, adhesives, edge bending, cutting, groove finishing, fixing accessories, sealant, and complete installation as per approved design and site conditions. The scope includes the supply of all materials, transportation, tools, consumables, and labour required for the complete finished work. (Colour of ACP approved by GE). Make : VIVA Composite Panel or equivalent approved by any Command / ADG.

S&F openable glass (5mm thick) doors with aluminium frame (Min 3mm thick) including aluminium sections & glass, toughened/tinted/frosted glass panels, hinges, handles, locking arrangement, Double action floor spring, rubber beading, sealant, necessary hardware, cutting, alignment, testing, and complete installation as per approved design and site conditions. The scope includes supply of all materials, accessories, transportation, tools, and labour required for the complete finished work including taking down old existing doors and repair the wall/floor surface to fixed the new door. Make : Jindal/ Saint Govind/ Ozone.