ELECTRICAL AND CIVIL WORKS FOR THE ENHANCEMENT OF POWER TRANSFORMER IN THE EXISTING NADUVAKURICHI 33/11 KV SS IN TUTICORIN EDC

Amount

ABSTRACT

Civil works

Electrical works

Description of Work / Item(s)

Earth work excavating and depositing on bank with an initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders including cost of all labours, lead, lift, T & P, etc., complete.

Filling with M sand for filling in foundation with watering and consolidation including cost of all materials, labours, lead, lift, etc., complete.

Providing PCC 1:4:8 for foundation with 40 mm size machine crushed HBG metal including plasticiser at the rate of 100 ml per bag of cement, cost of all materials, labours, lead, lift, curing, etc., complete.

Refilling with excavated earth other than sand complying with standard specification for filling in foundation and basement with watering and consolidation including cost of all materials,labours,lead,lift, T & P,etc., complete as directed by the Engineer at site..

Random Rubble Masonry in cement mortar 1:6 including cost of all materials, plasticiser at the rate of 100 ml per bag of cement, labour, lead, lift, etc., complete.

Flush pointing in CM 1:3 for RR masonry including cost of all materials,plasticiser at the rate of 100 ml per bag of cement, labour, lead, lift etc., complete.

Providing PCC 1:3:6 for plinths with 12 mm to 20 mm size machine crushed HBG metal including plasticiser at the rate of 100 ml per bag of cement,all other materials, labours,lead,lift,curing,etc., complete.

Filling the basement with quarry rubbish with watering and consolidation including cost of all materials, labours, lead, lift, etc., complete complying with standard specification.

Supplying & providing anti-termite protection including cost of all materials, labours, lead, lift, etc., complete.

Providing centering and shuttering for RCC works upto 3m heights using M.S. sheets of size 90 x 60 cm with BG 10 guage stiffened with welded M.S. angles of size 25 x 25 x 3 mm laid over silver oak scantlings of size 10 x 6.50 cm at 90 cm c/c & supported by casurina props 10 to 13 cm. dia at 75 cm c/c complying with standard specifications including cost of all materials, labours, lead, lift,etc., complete.

Supplying & providing TMT rods including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, etc.,complete.

Providing RCC 1:1.5:3 using 12 to 20mm machine crushed HBG metal including cost of all materials, plasticiser at the rate of 100 ml per bag of cement, labours, lead, lift, curing, etc. complete excluding the cost of reinforcement.

Brick work in CM 1:5 using second class chamber burnt bricks including cost of all materials, plasticiser at the rate of 100 ml per bag of cement, labours, lead, lift, curing, etc. complete

Providing two legged scaffolding for works upto 3m. heights using 10 to 13 cm. dia. casuarina props, the distance between the two rows being 1.25m. and the spacing of posts being 2m. in both the rows with two horizontal posts with 0.5m. overlap on either side and braces at 2m. c/c including longitudinal & transverse middle braces to stepup and providing a platform with country wood planks of 40 mm. thick & 1m. width,etc., including cost of all materials, labours, lead, lift,safety measures, etc., complete.

Supplying and fixing in position of single leaf door half glazed & half PLB in Aluminium anodised section 101.06 x 44.75 x 2.40 mm box section for outer frame and using sections 83.50 x 44.45 x 2.40 mm for vertical, 50 x 44.45 x 2.50 mm for top & middle and 101.06 x 44.75 x 2.40 mm for bottom and the door shutter covered with 12 mm thk. exterior grade both sides decorative finished pre - laminated MDF board at bottom & 5.50 mm thk. plain glass at top will all necessary fixtures such as handles, hinges, locking arrangements, namatha beading, stay rods, L angles, aluminium clips, rubber beading etc., complete as directed by the Engineer at site.

Supplying and fixing in position of Hydraulic floor spring of various sizes,Double action Hydraulic floor spring of approved quality brand,manufacture as per BIS standards for doors including cost of cuttin floors as required,embedding in to floors and stainless steel cover plates with aluminium pivot and single piece MS sheet outer box with side plate etc., capable of taking upto 130 Kg., weight from door shutter like HARDWYN make ( U - 32 ) or its equivalent with ISI Monogram.

Supplying & fixing in position of Hydraulic Door closer of approved quality using Aluminium Extruded section body tubular type Universal with double speed adjustment like HARDWYN (make) GAZEL or equivalent with ISI Monogram.

Supplying & fixing in position of anodized aluminium glazed sliding window in two tracks with bottom frame gutter 61.85 x 37 mm x 1.055 kg / m and top & side 62 x 29.5 mm x 0.695 kg / m and shutter lock 39 x 20 mm x 0.605 kg / m, botom 41 x 20 mm x 0.355 kg / m, side & top 39 x 20 mm x 0.488 kg / m, 5.50 mm thk. plain glass, rubber beading, center lock including cost of all materials, labours, lead, lift,etc., complete.

Supplying & fixing in position of anodized aluminium fixed type Ventilator Zig - Zag type using Alumunium box section 63.00 x 38 mm at 0.85 kg / m, 5.5 mm thick machine frosted glass, Aluminium mesh fixed with aluminium beading clip 17.15 x 17.27 at 0.178 Kg / m, fixing rubber lining, etc. including cost of all materials, labours, lead, lift, etc., complete.

Special ceiling plastering with C.M.1:3, 10 mm thick for RCC works including cost of all materials,plasticiser at the rate of 100 ml per bag of cement, labours,lead,lift,curing,etc., complete.

Special plastering with C.M.1:3, 12 mm thick including cost of all materials, plasticiser at the rate of 100 ml per bag of cement, labours, lead, lift, curing,etc., complete.

Plastering in walls with C.M 1:5, 12 mm thick including cost of all materials, plasticiser at the rate of 100 ml per bag of cement, labours, lead, lift, curing, etc., complete.

Providing border in CM 1:3, 20 mm thick 200 mm depth at plinth beam including cost of all materials, labours, lead,lift,curing, etc.,complete.

Providing projected border in CM 1:3, 12 mm tk. 7.5 cm depth for top of the parapet wall including cost of all materials, labours, lead, lift, curing, etc., complete.

Floor finishing with C.M 1:3, 20 mm thick including cost of all materials, plasticiser at the rate of 100 ml per bag of cement, labours, lead, lift, curing, etc., complete.

Supply and fixing of non slippery floor tiles of 305 x 305 x 6 mm first quality design ceramic tiles of approved colours in CM 1:3, 10 mm thick and pointing with white cement 0.40 Kg / Sqm including cost of materials,plasticiser at the rate of 100 ml per bag of cement, labours, lead,lift,etc., complete.

Wall tiles with approved first quality & colour glazed tiles with printed design 150 mm x 150 mm x 6 mm laid in cement mortar 1:2, 10 mm thick and pointing with white cement using 0.4 kg / m² including finishing the joint and pointing flush with the surface including cost of all materials,plasticiser at the rate of 100 ml per bag of cement, labour, lead, lift, etc., complete.

Supplying, fabricating and placing in position of structural steel materials like M.S. Channel 125 x 65 mm including cost of materials,labours,lead,lift,etc., complete as directed by the Engineer at site.

Supplying, fabricating and placing in position of structural steel materials like M.S. Angles 50 x 50 x 6 mm / 65 x 65 x 6 mm including cost of materials, fabrication charges, lead, lift, etc., complete as directed by the Engineer at site.

Supplying, fabricating and placing in position of structural steel materials like M.S. Chequrred plate 5 mm thick including cost of materials,labours,lead,lift, etc., complete as directed by the Engineer at site.

Supplying & fixing of M.S rail (90 lbs) for transformer plinth including cost of rail, cutting the rail to the required length and welding grip rods for the rails, transport Charges, Labour for fixing and handling, T&P etc.,complete as directed by the Engineer at site.

Painting the iron work with one coat of approved colour and quality enamel paint inluding cost of all materials, labour,lead,lift,etc., complete.

Providing surki concrete with broken brick jelly of 40 mm size in pure slaked lime over RCC roof slab in the proportion 32:12.5 for a depth of 80mm for giving required slope and thickness to roof as required, well beaten with wooden beaters including cost of all materials, labours, lead, lift, curing, etc., complete.

Terrace flooring of one course of pressed tiles 230 x 230 x 20mm over CM 1:3, 20mm thk. mixed with crude oil 10% by weight of cement and pointing with the same oiled mortar 1:3 with Nitibond AR at 250ml / bag of cement with required slope over RCC roof slab including cost of all materials,plasticiser at the rate of 100 ml per bag of cement, labours, lead, lift, crude oil, curing, etc., complete.

Providing two coats of oil bound distemper of approved quality, brand & colour for inner wall surfaces over a coat of white cement with Alkali Resistant Distemper primer including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc., complete.

Providing two coats of ready mixed Plastic emulsion painting of approved colour & quality on outer walls over one coat of white cement and emulsion primer, including cost of all materials, scaffolding charges, labours, lead, lift, etc., complete.

Painting two coats of Synthetic enamel painting of approved colour and quality over one coat of red oxide primer in new steel works including cost of all materials, lead, lift, labour, etc., complete.

Supplying & fixing PVC panelled door shutters hollow type - 200 x 20 mm panels with 1 mm wall thickness for panels and styles & rails of suitable size with 2 mm wall thickness suitably reinforced using MS angle / flat including cost of necessary aluminium hinges & other furniture fittings, etc., complete.

Supplying and fixing in position of best Indian type white water closet of size 580 x 440 mm (Oriya pan) with P or S traps, both sides glazed with a pair of foot rests with necessary brick jelly concrete in lime mortar 1:2, complying with standard specifications including cost of all materials, labour, transporting with necessary fittings, lead, lift, etc., complete.

Supplying and fixing white wash basin 550 x 400 mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug & chain, 32mm dia. B class G.I waste pipe, 15mm dia. G.M wheel valve, 15mm dia. nylon connection, 15mm dia. brass nipples, 15mm C.P pillar tap, etc. including cost of all materials, labours, lead, lift, etc., complete.

Supplying and fixing in position of PVC ready made water tank of 750 litre capacity of best quality approved make including cost of cover, with opening for inlet, outlet and over flow pipe, transporting and fixing charges & complying with standard specifications including cost of all materials,specials,cutting,threading and jointing charges ,labour,necessary fittings, lead, lift, etc., complete.

Supplying & fixing ( 500 x 400 mm ) PVC / Fibre glass framed 5.50 mm thick mirror shelf type with hard board backing including cost of all materials, labour, lead, lift, etc., complete and as directed by the Engineer at site.

Supplying and fixing of Brass chromium plated towel rail 60 cm long with 20 mm dia with brackets including cost of all materials, labour, lead, lift, etc., complete and as directed by the Engineer at site.

Supplying, jointing and fixing in position of 110 mm dia ( 4kg / cm2 ) PVC approval quality and best variety (Finolex or equivalent) pipe for Rainwater downfall including specials, T.W plugs, clamps, screws, labours, lead, lift, etc., complete.

Supplying, jointing and fixing in position of 110mm ( 6 kg / cm2 ) pipe ISI make for sewage line inclusive of specials, bend, with inspection door wherever necessary, T.W. plugs including cost of all lead, lift, labour charges, etc., complete and as directed by the Engineer at site.

Supplying, jointing and fixing in position of 75 mm ( 4kg / cm2) PVC pipes (ISI make) including cost of cowl, lead, lift, labour charges, etc., complete as directed by the Engineer at site.

Supplying, jointing and fixing in position of 25 mm dia PVC water pipes ( ISI make ) 10 Kg / cm2 including PVC specials, cost of other materials, lead, lift, labour charges, etc., complete as directed by the Engineer at site.

Supplying, jointing and fixing in position of 40 mm dia PVC water pipes ( ISI make ) 10 Kg / cm2 including PVC specials, cost of other materials, lead, lift, labour charges, etc., complete as directed by the Engineer at site.

Supply and fixing of Brass Chromium plated Screw down tap 15 / 12 mm ( Heavy Type ) including cost of other materials, lead, lift, labour charges, etc. complete as directed by the Engineer at site.

Supply and fixing of Gun metal wheel valve 40 mm (Heavy Type) including cost of other materials, lead, lift, labour charges, etc.,complete as directed by the Engineer at site.

Supply and fixing of Gun metal wheel valve 25 mm ( Heavy Type ) including cost of other materials, lead, lift, labour charges, etc., complete as directed by the Engineer at site.

Supplying & filling with 40mm HBG stone for dispersion trenche cost of all labour charges, lead, lift, etc., complete as directed by the Engineer at site.

Supplying and filling with 6mm to 20 mm metal as per standard specification inlcuding cost of all materials, Labour, lead, lift, etc., complete.

Supply and run of 4 of 6 sqmm. ( 84 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains.

Supply and run of 4 x 6 sqmm. (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 32 mm dia. GI pipe (Class B) suitably bent at both ends with necessary angle iron up right and end supports for mains.

Supply and fixing of 375 mm ( 15" ) sweep ( light duty ) AC exhaust fan complete without provision of holes in the wall etc. complete.

Supply and fixing of TNEB meter board suitable for 32A Three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link & earth link (1" x 1/8" copper flat) on TW plank of size 600 x 450 x 19 mm with supporting TW reepers of 1" thk. and either side with painting with suitable bolt & nuts for fixing the TW plank on wall with earth connection & inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and fixing of 3 Phase 32A aerial fuse unit for 3 Nos 32A fuse units (500V) on suitable MS sheet covered with 6mm thk. hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box.

Supply and fixing of 32A TPN metal clad switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A F.T. switch covered with hylem sheet of 3mm thk. with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (For electronic regulator).

Supply and fixing of single box type 4' x 36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting.

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated S.C. unsheathed cu. conductor cable of 1100V grade in suitable PVC rigid pipe on wall & ceiling with PVC accessories with 150x100x113mm TW switch box in flush with wall with 3mm thk. hylem sheet cover for 5A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Wiring with 2x4 sq.mm(56/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall & ceiling with PVC accessories with 150x100x113mm TW switch box in flush with wall with 3mm thk. hylem sheet cover for 15A 3 pin flush type non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.

Supply and fixing of fancy glass shade and 11W CFL for BH point (Battern holder - Bakelite).

Supply & fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300 W regulator with 1m. down rod with fan clamp with side plates & cross arm of size 450mm (18").

Casting of precast cover slabs of various sizes using RCC 1:1.5:3 mix including cost of form boxes & fixing the form boxes, cost of all other materials, labours, lead, lift, curing, etc.,complete but excluding the cost of steel reinforcement.

Laying the new precast cover slabs in position over the cable trenches including cost of labours, lead, lift, T & P, etc., complete as directed by the Engineer at site..

Providing, laying, Spreading and compacting graded stone aggregate to Wet mix Macadam specification including premixing the materials with water at OMC in mechanical mix plant carriage for mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve 98% of MDD complete as per clause 406 of MORTH- Rev 5 specification. The aggregates shall confirm to the physical requirements set fourth in table 400-10 grading requirements as per table 400-11 of MORTH specification and as directed by the Engineer as per Cl.406 of MORTH V - revision.

Providing 12 mm dia holes in the M.S angle for binding the fencing wire including cost of labour, T & P, etc., complete as directed by the Engineer at site.

Aligning and erection of the fence post correct to level including lifting the post and placing it in the pit etc., complete as directed by the Engineer at site..

Supplying and fixing of eye bolt 16 mm dia M.S. rod including cost of materials,labour, lead lift, etc.,complete as directed by the Engineer at site..

Supplying of 12 Gauge of best quality GI barbed wire two ply four pronged ( Galvanised ) confirm to IS 278 of IOWA and labour charges for tensioning of barbed wire as per drawing no. 168 - R 2 of 8 rows horizontally and 9 rows vertically in one bay of 4.50 m including cost of G.I. barbed wire, G.I. binding wire with all labour,lead, lift, etc., complete as directed by the Engineer at site.

GST 18% AS PER NORMS

Description of Work / Item(s)

Amount

Earthwork excavating, Hard stiff clay, Stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed small size boulders and hard gravelly soil.

PCC 1:3:6 mix using with 40mm HBS jelly including cost of all materials, lead, lift, etc. complete without form work.

PCC 1:2:4 using 20 mm HBS jelly including cost of all materials lead, lift,curing etc., complete with form work

Plastering with CM 1:3,12mm thick including cost of all materials,labour, lead, lift, curing etc. Complete.

Labour Charges for providing grouting pocket, placing the template for breaker foundation as per the drawing, grouting the foundation bolt as per the instruction of the site engineer including the cost of curing, T&Ps etc., complete ( As per SSE Data Page no 4 -- To be done by the contractor)

Labour charges for painting poles plinths of structure &eqipments plinths etc.,withsnowcem two coats over two coats of white cement including cost of paint and other materials, labour,lead, lift, curing etc., complete.

Labour machinery consumable for the fabrication for steel structuresHeavy section (above 14 kg/m)

Labour machinery consumable for the fabrication for steel structuresLight section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel StructuresHeavy section abovekg/m)

Labour for the Erection of the Fabricated Steel StructuresLight section(below14kg/m)

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer (Earth to be supplied by the contractor)

Supply and providing of 450-600 mm dia 300 mm height 36 mm thick cement coller with top cover for identification of earth electrode locatio as directed by the field engineer

Labour, consumables for first primer coat using Red oxide paint and first finish coat of painting using green enamel Paint of all metal sections used for connecting earthing , after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie asian, Dulux, Nerolec) and Labour for first primer coat of Painting using Red oxide paint and first finish coat of painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie asian, Dulux,Nerolec) and Labour for second coat of Painting using Aluminium paint including consumables.

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer.11 KV Breaker

Labour for erection of Measurement transformers, reactor units, without using crane including providing holes wherever required as directed by the field engineer.11 KV CT

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer.33 KV AB Switch

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer.11 KV AB Switch

Labour for erection of LAS station/Distribution type single unit including monitors & accessories.33 KV LAS

Labour for erection of LAS station/Distribution type single unit including monitors & accessories.11 KV LAS

Dismantling of jumber /dropper using Zebra conductor including consumables 30% LC work

Labour for dismantling of 50 MM Bus Bar including consumables 30% LC Work

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer.11KV Single Conductor Strung Bus/phase

Labour for the erection of Insulator single pole stack for supports Uprights/Underhang including Meggering & other consumables and as directed by the field engineer. Up to 33 KV

Labour for erection of Bus Bar inclusing suitable modification of end clamps providing holes wherever as directed by the field engineer 50 MM (1 Length )

Labour for the erection ofJumper /Droper using Moose/ Zebra/Panther conductor including Modification of End clamp,providing holes etc whereever necessary as directed by the field engineer.

Labour for the Erection of Control Panels includings consumables as directed by the field engineer.Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/Relay Panels of Grid type (P&C)

Labour for erection of Battery set includingtwo coats of painting of acid proof paint on wooden stand and neatly stacking the battery cells and fixing of connecting plates.110V DC,120 AH

Labour ,consumables for the initial filling and first chargeing of the battery to the required AH input and thereafter atleast 3cycles of charge/discharge of the battery set still the battery is charged to its full capacity as directed by the field engineer.110V DC, 120 AH

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineerUp to 8 Core

Supply and glanding of ISI mark cable glands of suitable sizes of reputed make including removing of insulation of cables and providing suitables holes as required and as directed by the field engineerLabour for erection of cable end glands(16/19 mm)

Supply and glanding of ISI mark cable glands of suitable sizes of reputed make including removing of insulation of cables and providing suitables holes as required and as directed by the field engineerLabour for erection of cable end glands(22/25 mm)

Supply and glanding of ISI mark cable glands of suitable sizes of reputed make including removing of insulation of cables and providing suitables holes as required and as directed by the field engineerLabour for erection of cable end glands(28/32 mm)

supply and termination of cables cores end dressed neatly including the cost of cables socket ferrules sleeves tags ties stropes etc as directed by the field engineer (Number of core ends in unit of 1000)

Labour for erection of cable core end termination (No.of core ends in unit of 1,000)

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs &2.5inch dia for 2mtrs)including single/ double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and one coat of aluminium paint.

supply and erection of yard light fuse unit mounting box 200X 200X150 mm

Supply and Erection of 1x72W or 2x36W,240v LED street light Aluminium case fitting ISI - Make as per direction of site engineer. (Inclusive of all taxes)

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

Labour charges for fabrication, painting and erection of 1 No. equipment details / salient features board as per the dept. specn. Incl. the cost of 20 SWG CR Sheet (8'x4'size) , paint etc., comp.excl.the cost of MS.Channel, angle & flat, empty tr.oil drum and the cost of elecy. used for this work33 KV SS with Two Power Transformer

Labour charges for fabrication, painting and erection of earthpit details board asper the dept. specn. Incl. the cost of 20 SWG CR Sheet , 10mm RTS Rod,paint, weld.rod & T & P etc., comp.excl. the cost of MS.Channel, angle & flat, empty tr.oil drum and the cost of elecy. used for this work

Labour charges for painting with colour enamel paint & Lettering with enamel paint on the equpt. Detail board, earthpit detail board, circuit br.station battery room, CT juncn. Box, fire stand, sand drum etc., incl. the cost of enamel paint, painting brush, lettering brush, kerosene, labour, lead , lit etc.,

Fabrication supply and fixing of CT /PT junction bos size 400X 300X150 mm of 16 SWG 1.6 mm MS Sheet with primer coat paint supply fabrication and erection of box fixing flats using 50X 8 MSF supply and fixing of 25 X mm2 braided flexiable copper loops to be earth two coat of enemal paint provision for fixing terminal block MCB including consumables VAT fright etc

Fabrication supply and fixing of AC junction bos size 535X 310X 127 mm of 18 SWG 1.6 mm MS Sheet including fuse unit 18 nos should be fitted with base consumables VAT fright etc fright etc

Labour charges for providing earth spike with GI Pipe incl.fabricn. Of support prime, painting & fixing as per dept.specn.cost of sundry item.T &P but excl.GI pipes, incl.unloading of materials at site & loading of materials from site for devolution. But excl.the cost elecy.used

Supply of steel items as per TNEB specification including cost materials loading transporting unloading and delivery at site complete

40mm M.S Round Rod

65X10 mm M.S Flat

50X8 mm M.S Flat

100X50mm M.S Channel

50X50X6 mm MS Angle

2" Free end clamp

2" switch end clamp

200X100 RS Joist

2" Corona ball

T clamp for 2" Bus

T clamp for Zebra to Zebra

Switch end clamp for Zebra

Switch end clamp for Mink

Reducer clamp for 2"

Sypply of Gi bolt Nut(vasrious size)

supply of GI washer (various sixe)

25mm Dia GI Pipe

50 MM Aluminium BUS Bar pipe

4 bolted tension fitting

18" Eye Bolt with 2 nuts

Bidder Name

JK ENGINEERS