Construction of pipe inlet at km 0.600, staircase construction and painting work of cross regulator of Bankatwa Rajwaha in Tulsipur tehsil of Balrampur district.

Amount

Dry earth work in foundation of Masonary work on channels of discharge below 10 Cumecs including lead upto 30M. And lift upto 1.5 M and its disposal.

Earth work including lead upto 630M & Lift upto 1.5M, excluding mechanical compaction but including manual compaction and dressing to profile. For road/canal/flood embankment upto 1.5M height.

Earth work in Making sub grade in lining work including watering, compaction and preparation of surface as per directions of engineer-in-charge required for proper completion of work including cost of all T.& P., labour etc.

Laying CC A20-M15 in foundation of structures with cement (OPC 43 grade) corse sand of F.M. not less than 2.0 and hard stone ballast (20-40 mm size) including lead upto 60.00m, lift upto 3.0m. mechanical mixing & mechanical vibration including cost of centering and shuttering required for proper completion of work including cost of all T.& P., labour etc.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete on concrete work. Colour scheme should be as per directions of engineer-in-charge.

Painting two coat of synthetic enamel paint on new surface with superior quality of approved make including cost of all material labour T&P etc. required for proper completion of work. Colour scheme should be as per directions of engineer-in-charge.

First class bricks work in 1:4 cement mortar with sand of 2.0 F.M. including cost of all material, lead, lift labour, and T&P etc.

Cement pointing in 1:2 (flush) cement mortar with sand of 2.0 F.M. on exposed surface of brick masonry including cost of all material, lead, lift labour, and T&P etc.

Brick work 1:3 in lining 160 mm thick (double layer) including 10 mm mortar underneath including cost of material and labour etc. required for proper completion of work as per directions of Engineer-in-charge.

Providing and fixing 1000 MM dia hume pipe of 2.5 m length including cost of all T.& P., labour etc. required for proper completion of work as per directions of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of material and labour etc. required for proper completion of work as per directions of Engineer-in-charge.

Supplying and fixing EPDM U channel edge seal strip (1.6mm) including cost of all T.& P., labour etc. required for proper completion of work as per directions of Engineer-in-charge.

Supplying and fixing EPDM rubber sheet commercial grade 60A 3mm thick, 1.2m wide including cost of all T.& P., labour etc. required for proper completion of work as per directions of Engineer-in-charge.

MAHIPAL PANDEY (BID ID -4735604)