PROVISION OF RATION DISTR AREA TO MD JCOS/OR AT ADM WING (BLDG NO. P-156), SEPTIC TANK FOR OR LIVING OF ARN AND TOILET BLOCK FOR STUDENT OFFICERS NEAR EXAM HALL SHED NO. 46 (F E AND M) AT CME, PUNE

Amount

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm, deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete below wall complete all as specified and directed.

M&L for precast plain cement concrete solid block masonry in PCC 1:3:6 type C1 using 20mm graded stone aggregate, built in CM 1:6 exc, 10 cm width all as specified and directed

M&L Damp proof course 40mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified & directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering all as specified and directed.

M & L Hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.

M&L 75 mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified & directed.

M & L joint free non-skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeing 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match (Size of tile 400mmx400mm) laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Returning , filling in, includidng spreading , levelling , watering and well ramming in layers not exceeding 25 cm in hard/dense soil complete as specified and directed

Removing excavated material (soil) not exceeding 50m and deposited where directed at a level not exceeding 1.5 m above the starting point complete as specified and directed by Engr-in-Charge.

M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floors, plinth protection, path etc smooth finished surface without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on stone masonry surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 complete all as specified and directed.

M&L rendering 15mm thick on stone masonry surfaces in CM 1:4 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:4 complete all as specified and directed.

M & L for coloured glazed ceramic tiles 350mmx250mm x7mm/450mmx350mmx7mm thick & boarder in vertical surfaces such as skirting , dado etc set & jointed in neat cement slurry & pointed in coloured cement to match fixed including fixing on backing coat 10mm thick in CM 1:4 all as specified and directed.

M&L preparation of new surfaces of walls and applying two coats of cement based paint on wall surfaces complete all as specified & directed.

M&L for Mild Steel works as in bands, straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed.

M & L for preparing surface of steel or iron work new or old, of any description and girth, not otherwise described and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each and treated with tar or coal tar black paint complete all as specified and directed.

M & L for cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bands, plinth courses, parapets, kerbs, apex stones, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

S&F steel door including projecting type hinges, steel handle, locking device including steel frame for door shutter with glazing bars, dovetailed or welded of any description and size complete all as specified and directed .

M&L preparing new steel and iron surfaces of any descriptions, over 10mm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

S&F for under counter wash hand basin coloured complete with CP waste coupling and waste pipes & PVC connections Make - Hindware Cat No. 10065

S & F single towel rail 600mm long complete all as specified and directed of make Jaquar Code No. AQN-7711

S & F Angular stop cock with wall flange of 15mm dia capstan head complete as specified and directed by Engr-in-Charge. Make - Jaquar

S & F sink cock with wall flange of 15mm dia capstan head complete as specified and directed by Engr-in-Charge. Make - Jaquar

S & F Soap dish holder complete as specified and directed by Engr-in-Charge. Make - Jaquar

S & F cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75mm fixed complete complete as specified and directed

S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete all as specified and directed

S & F 110 mm dia PVC (SWR) bends any radius, provided with access door complete all as specified and directed

S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and directed by Engineer-in Charge.

S & F 75 mm dia PVC (SWR) bends any radius provided with access door complete as specified and directed

S&F stack clamps for 75mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 15mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed complete as specified and directed

M & L for vitreous china half stall ceramic urinals white of size 720x485x310mm with glass partition, including CP push cock, CP speader,PVC Coneetion, grating and waste pipe including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm brass screws, pointing around urinal back in cement, fixing to flushing cistern , flush pipe and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as directed. (Make - Jaquar Cat No. URS-WHT-13261)

M & L 20mm thick Granite (of any type work) (table rubbed and polished) in steps, jambs, pillars, window cill, cooking platform, both side polished including rounding exposed edges fixed in walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F PVC connection 15 mm dia bore with PTMT nut of length 450 mm all as specified.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L Rotational moulded polythylene water storage tanks of capacity 1000 ltrs (Cylinderical vertical with closed top) hoisted and fixed in position all as specified and in SSR Part-I, including 20mm dia ball brass valves , high pressure with polythene float and flynut complete screwed for iron pipe and brass ferrule complete all as specified and directed.

M&L Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-w (Gde-E-250) quality A all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed.

S&F 0.63mm PGI sheeting in ridge, hips, valley gutters, drips and straight flashing (length and girth as fixed) etc of any description complete all, as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed

M&L for RCC drain pipes 150mm , class NP-2 laid in trenches and jointed complete with collar all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to RCC drain pipes including packing under and hunching against side of pipes with concrete after they are laid and jointed, dia of pipe 150mm complete as specified and directed by Engr-in-Charge.

M & L cutting hole in brick walls/stone walls exc one brick but not exc 2 bricks for any purpose and making good dismantled position in cement mortar 1:3 or cement concret 1:2:4 type B-1 as required complete all as specified and directed by Engineer-in Charge.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shade as specified and directed by Engineer-in-Charge.

M&L sand filling under floors or in foundation including watering as required all as specified and directed.

M&L for Surface dressing n. exc. 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete in post hole complete all as specified & directed.

S & F mild steel work with hollow sections as in posts, roof trusses (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing including distance pieces.cleats etc conforming to IS 1161-1998 grade St.-240 complete all as specified and directed by Engineer-in-Charge.

S&F of Fe 410-W (Gde-E-250) quality - B mild steel plates, plain or chequered , 5mm thick or over in thickness in available sizes complete all as specified & directed.

S & F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws of any description complete all as specified and directed.

Supply and fix mild steel bolts (machine made) with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one nut hexagonal, dia of shank 12mm, length of bolt 50mm to 100mm, complete all as specified and directed.

M & L for excavation in trenches not exc 1.50 m wide and not exc 1.50 m depth for foundation etc n. exc 10 sqm on plan and getting out in soft / loose soil complete all as specified & directed.

M & L machine cut kota stone slab flooring 20-25 mm thick over cement 10mm thick screed base laid in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for use and waste of formwork in rough finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) all as specified and directed.

M&L for use and waste of formwork in rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded stone aggregate), for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Roundidng to edges of stone slabs , such as in steps, cooking platform and other similar situation complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-w (Gde-E-250) quality-A all as specified and directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay complete with glazing bar dovetailed/welded all as specified and directed

S&F sheet glass ordinary quality 3mm thick and glazing with oil puty or fixed with wooden beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

Exacavtion in over area not exceeding 1.5m deep and getting out in soft/ loose soil complete as specified and directed by Engr-in-Charge

M&L for precast concete cover slab of 600 mm x 600 mm for man holes with provision of collar all around to house the cover slab and collar fixed to wall of manhole in 1:6 cement mortar having smooth surface finish complete all as specified and directed by Engineer-in Charge.

Construction of conventional RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 metre and overall depth of 3 metre for 100 user all as specified and shown on drgs complete all as specified and directed by Engineer-in-Charge.

Construction of soakage well with excavation and earth work in soft / disintegrated rocks, PCC 1:3:6 type C-2 using 40mm graded stone aggregates in foundation, honey comb brick work one brick thick using fly ash bricks of old size in walls built in cement mortar 1:4 and precast M-25 grade ring, RCC cover slab in M-25 concrete 100 mm thick including required form work, with reinforcement of 8mm TMT @ 125mm centre to centre, filling with brick bats, rendering exposed surfaces and externally 150mm deep, return filling, removal etc. complete of size 3.0 m dia and 3.0m deep all as specified and shown on drgs complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring any length using approved colour coding as per IS with stranded copper conductor 1.5 sq mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, (FR) IS-694 marked in and including heavy duty, PVC conduit including all accessories etc. heavy duty ISI marked with mild steel sunken boxes with earth dolly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally covered with plastic laminated sheet suitable of switches including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specifed for the following :-

One light/ fan point controlled by one switch and regulator

Socket outlet, three pin, 5 Amp, independent

Socket outlet, three pin, 5 Amp on the same board

All as per item No.71 above, but with stranded copper conductor 2.5 sq mm (nominal area), including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F ceiling rose, suface bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified and directed.

S & F switch piano, flush type, single pole, one way and 6 Amps, 230 volt complete all as specifed and directed.

S & F switch piano, flush type, single pole, one way and 15 Amps, 230 volt complete all as specifed and directed.

S & F socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and directed.

S & F socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and directed.

S&F for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 04 sq. mm nominal area and drawing in PVC conduit including PVC insulated 1.5 sqmm (nominal area) stranded copper conductor earth wire complete all as specified and directed NOTE : Two runs of 4 sqmm cable one run of 1.5 sqmm cable and one run of PVC conduit will be measured as one unit.

Supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/ surface mounted luminaires, high efficiency diffuser for soft glare free light of capacity 20 watt suitable of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. Make : Cat Part No. ENDURALINEARNEOBS20W LED865SPCWH of Havells or equivalent model in Wipro/ HPL/ Philips.

S&F Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 2.5 Sqmm nominal area and drawing into PVC non metallic PVC conduit including PVC insulated 1.5 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 2.5 Sqmm cable, one run of 1.5 sqmm cable and one run of PVC Conduit will be measured as one unit

Supply & fix 12 way SPN with 200 amps rated bus bar, double door all as specified and directed.

Supply and fixing of MCB Single pole and neutral rated capacity 40A, 240 V breaking capacity 9KA C series all as specified and directed.

Supply and fixing of MCB Single pole rated capacity 5 to 40 A, 240 V breaking capacity 9KA C series all as specified and directed.

Supply and fix Street light LED fittings capacity 20 Watts, pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 65 Proptection and necessary fixing arrangement i.e pipe mounting GI bracket bent in shape not exceeding 1.5 mtr in length made out of 40 mm dia GI pipe complete all as specified and directed by Engineer-in-charge. (Make- Havells item description ENDURACITYLITEPLATSL20WLED757SASYBOPC or same type in all respect of Wipro/ Bajaj)

Supply and fix Ceiling fan 1200 mm sweep, 5 star rated and ISI marked suitable for operation on 230 volt 50 Hz AC supply complete with electronic type fan regulator and accessories complete all as specified and as directed

Supply and fix rigid steel conduit as in down rod of ceiling fans in false ceiling with necessary fixing arrangements of size 20 mm all as specified and directed.

M & L for Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth of not less than 1.50 metre below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.

Supply, installation, commissioning of Glass Top Deep Freezer Capacity 320 ltrs, single phase, 240 Volts, 50 Hz all as specified and directed.

Supply and fix exhaust fan AC single phase 230/ 240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers and all fixing arrangements such as plywood 18mm thick of suitable size all as specified and directed.

UNIQUE ENGINEERS