Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹41.3 L+₹1.9 L (4.92%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Repair / replacement of plumbing items, sanitary fitting and other misc items of bldg in Zone A of AOR of AGE B/R Dett-B under GE 862 EWS
2023_MES_614922_1
GER-33/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
Class D a(i)
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹90,000
Yes
17 Oct 2023
22 Aug 2023
25 Sept 2023
22 Aug 2023
23 Sept 2023
4 Sept 2023
Amount
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 15 mm bore and connections including taking down existing pipe, complete all as specifed and directed.
M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down GI tubing 20 mm bore and connections including taking down existing pipe, complete all as specifed and directed.
M&L for cutting chases, for water tubing or concealed etc and making good to facings where required and plastering in cement mortar 1:4 cutting not exc 10cm grith in brick walls, complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall, complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches / wall or in floor, complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius with access to door, complete all as specifed and directed by Engr-in-Charge.
S&F in repair 75 mm bore PVC (SWR) bend any radius with access to door, complete all as specifed and directed by Engr-in-Charge.
M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed.
M&L for granite of any type work (tube rubbed and polished) 20mm thick as in cooking platforms and like in cement mortar 1:4 including painting in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including taking down of old slab, complete all as specified and directed.
S&F in repair viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.
S&F in repair for vitreous China urinal flat back of size 465x355x265 mm white (minimum), bowl type, complete including providinh and fixing plus, bedding urinal against wall in cement morter 1:2 securing urinal to plus with and including 60cm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including connecting to waste pipet, complete all as specified and directed.
S&F in repair for vitreous china full stall urinals, white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe, complete all as specified and directed.
S&F in repair for waterless urinal kit with piping accessories, complete as specified and directed by Engr-in-Charge.
M&L in repair for urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms), complete all as specified and directed.
S&F in repair for viterous china water closet pedestal pattern in one piece toilet fitting sets for cera (flush kit) and all necessary fixing arrangement, complete all as specified and directed.
S&F in repair viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover, floor mounted, 'P' or 'S' trap, flushing kit, CP jet with PVC pipe of superior quality and all necessary fixing arrangements, complete all as specified and as directed.
S&F for in repair sinks with draining board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
S&F in repair for under counter wash basin ovel size 195x600x425mm complete all as specified and directed by Engr-in-Charge.
S&F in repair for counter top wash basin ovel size 545x545x180 mm, complete all as specified and directed by Engr-in-Charge.
S&F in repair brass cromium plated mixer for mixing hot and cold water for wash hand basin of 15mm dia screwed down for iron pipe, complete all as specified and directed.
S&F in repair brass cromium plated sink mixer for mixing hot and cold water of 15mm dia screwed down for iron pipe, complete all as specified and directed.
S&F in repair brass cromium plated wall mixer with hand shower arrangement with connection legs wall flanges and wall bracket for hand shower, complete all as specified and directed.
S&F in repair for centre hole basin mixer with popup waste system with 450 mm with all connecting accessories , complete all as specified and directed by Engr-in-Charge.
S&F in repair for overhead PVC water tank cover threaded or plug type suitable for tanks of 500 / 1000 ltr capacity, complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F in repair 15mm CP brass health faucet (hand shower) inlet length 100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc, complete all as speicified and directed.
S&F in repair for copper alloy chromium plated jet spray suitable for padestal pattern WCs including decorative choice flexible pipe fixed to iron pipe with and inclduing cover plate, complete all as specified and directed.
S&F for plastic water closet seat cover black/white colour close pattern with flat bottom and cover and mild steel chromium plated aluminum hinging device for pedestal pattern WC, complete as in repair all as specified and directed.
S&F for 15mm bore fancy type pillar taps, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete as in repair all as specified and directed.
S&F for chromium plated brass shower rose of size 125 mm with swivel joints fixing to steel pipes etc. Complete as in repair all as specified and directed.
S&F in repair for PVC waste pipe 600 / 900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.
S&F in repair CP soap dish holder fixed with including chromium plated brass screws, complete all as specified and directed.
S&F in repair for CP toilet paper holder with flap, complete all as specified and directed.
S&F in repair for glass corner shelf with tempered galss, stainless steel brackets and polished chrome finish rail , complete all as specified and directed by Engr-in-Charge.
S&F in repair for assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6 mm square support pipes, dedicated holes for spoon, pegs etc cover all size 600mmx750mmx250mm of standard pattern, complete all as specified and directed.
S&F in repair for sheet glass shelf assembly consisting 5.5 mm thick, sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
M&L in repair for decorative type cast brass steel finish rectangular towel rack made of 20-25mm thick dia 1.2mm thick polished tubes (minimum 4 Nos longer and 3 Nos cross), hooks, brackets and fixing arrangment of minimum size 600mm x 250mm, complete all as specified and directed.
S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange,fixed with screw wooden / plastic cleats complete all as specifed and directed.
S&F in repair for 15mm bore Stop valve (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.
S&F in repair of brass spindle (half furn / quar turn / full turn) 15mm bore bib tap, mixer tap, pillar tap and angle cock etc, complete all as specified and directed.
S&F in repair for 15mm bore angle valve, cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
M&L in repair for 15mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes complete all as specified and directed.
M&L in repair for 20mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes complete all as specified and directed.
S&F in repair for 15 / 20 mm GI tubing tank nipple with all connecting accessories , complete all as specified and directed by Engr-in-Charge .
S&f in repair for CP grating suitable for 75/100 mm bore floor trap and fixed with white cement complete, all as specified and directed.
S&F in repair for 15mm bore, pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern kit, complete all as specified and directed.
S&F in repair for CP hand shower (Health Faucet) imported AMS with double lock 1.20 meter long stainles steel hose & wall hook, complete as specified and directed by Engr-in-Charge.
S&F in repair for 15mm bore angular stop cock with flange, cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repair for 15mm bore bib cock with wall flange cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair soap dispenser with glass bottle fixed with including chromium plated brass screws, complete all as specified and directed.
M&L in repair for leakage of one piece WC of any make and any description by changing the cistern kit and all connecting accessaries complete all as specified and directed by Engr-in-charge.
S&F in repair for bathroom cabinet of hard thermosetting plastic of size 600x450mm, fitted with superior quality distortion free 4mm thick mirror, complete all as specified and directed by Engr-In-Charge.
S&F in repair for ball brass valves suitable for 15mm bore iron pipe high pressure of with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair for ball brass valves suitable for 20mm bore iron pipe high pressure of with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.
Taking down shutters of any description area n exc 1 sqm each and removing, complete all as specified and directed.
S&F for aluminum powder coated window with frame and two or more shutter made out of extruded anodised extruded aluminium section conforming and as specified in IS-737 or 65 x 39.5 x 1.5mm, side hung type with / without sash bars aluminium section weighing 0.55 Kg/m including 4mm thick plain sheet glass and stainless steel mosquito proofing and connected items i.e necessary joining cleats, galzing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long, hinges type B-21 100mm long, suitable handle, aluminium tower bolt, complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).
S&F for aluminum powder coated door with frame and shutters, made out of extruded anodised extruded aluminium section conforming and as specified in IS-737, or 101.6mm x 44.45mm x 1.27mm, fixed with and including anodised aluminium butt hinges, tower bolt, galzing clips and locking arrangements, hydraullic door closer/ floor spring, snap beading, handles and 5mm thick plain sheet glass, PVC sheet or particle board and connected items, with and including making good to the disturbed portion with its original specification, complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).
S&F for aluminum anodized three track slinding window with two or more shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle lock, etc including 65 X 39.5 X 1.5 mm section for complete frame and rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue, complete as specified and directed by Engr-in-Charge. (Note :- Minimum thickness of powder coating not less than 50 micron).
S&F for aluminum powder coated fixed partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx44.45mmx1.20mm thick with total height 3.20m. The panels shall be made out of 5mm thick tinted (frosted) glass in top & bottm of 12 mm thick both side laminated particle board (i.e 50-50) including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminum snap beading screw etc including making good to the disturbed portion, complete all as specified and directed. (Note :- Minimum thickness of powder coating not less than 50 micron).
S&F for aluminium powder coated anodised louvered ventilator with 4mm thick pin headed glass and 100mm wide glass strips, white framed and fixed with aluminium anodised frames etc, complete all as specifed and directed by Engr-in-Charge.
S&F for aluminium anodized powder coated grills 6.3mm dia decorative type 75mm mesh size, complete all as specified and directed.
S&F for pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded crushed stone agregate complete all as specified and directed.
S&F for pressed steel frame for doors with one or more rebates of size 105x60mm including necessary fixing lugs, hinges, lock and strike plate etc including back filling of chowkhats with PCC 1:3:6 type C-0 using 12.5mm graded crushed stone agregate complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.
M&L for steel ventilators with top hung shutters openable type including hinges and handle with steel peg stay complete without glazing bars, dovetailed or welded, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt, hold fast etc and similar work conforming to Fe 410-0 or Fe-310-0 work including welded fabricks frames, gate and framed truss etc, complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and shown on drwaing in SSR Part-II (2020) directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & shown in drawing mentioned in SSR Part-II 2020, complete all as specified and directed.
S&F for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed.
S&F for 75 mm size mortice lock of brass, vertical type, 4 levers fixed to aluminium doors, complete all as specified and directed.
S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed (ISI Marked), complete all as specified and directed.
M&L for 300mm MS ordinary rat tail rod pattern door springs (ISI marked) of approved make including roller and roller plate, complete all as specified and directed.
M&L for 300mm long (lenth of bolt) aluminium alloy, anodised, sliding door bolt with hasp, stapl (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruced sections or cast aluminium alloy anodised (ISI marked), complete all as specified and directed.
S&F for 250 mm long mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate (ISI Marked), complete all as specified and directed.
S&F for 300mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bol with rolled or drawn brass bolts and fixed (ISI Marked), complete all specified and directed.
S&F for extruded aluminium alloy handles size 125 mm fabricated type anodised (ISI marked), complete all as specified and directed.
S&F for 125 mm long cast type brass handle, (approved by GE) polished bright (ISI Marked), complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for sheet glass 4 mm thick, ordinary quality and fixed with aluminum & rubber beading in square not exc 0.5 sqm in each pane, complete all as specified and directed.
S&F for 3 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete after all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description from wooden or steel frames glazed with putty / beads, complete all as specified and directed.
S& F in repair for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvinsed wire staples , complete all as specified and directed.
S& F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvinsed wire staples , complete all as specified and directed.
M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new of previously untreates steel or iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.
M&L in repair for 18 / 19mm thick prelaminated particle board for cupboard, kitchen cabinat shtter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S&F for 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanished, complete all as specified and directed.
S&F in repair for 140mm long floor door stopper of aluminium alloy anodised body and tongue with hard drawn steel spring, complete all as specified.
S&F in repair for 50 micron thick reflective type solar control film sticked to glass pans as per manufacture's instructions, complete all as specified and directed.
S&F in repair for fancy type (colour and design approved by Engr-in-Charge) curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls), complete all as specified and directed .
S&F in repair for bracket with finials of fancy type (colour and design approved by Engr-in-Charge for curtain rod 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls), complete all as specified and directed .
S&F in repair for magnetic latch for cupboard shutters complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level, including dismantaling of tiles complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in sub base for tiling, complete all as specified and directed.
M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on brick or concrete masonry surface finished even and smooth without using extra cement, complete all as specified directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening, complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat of distemper oil emulsion, complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of distemper oil emulsion, complete all as specified and directed.
M&L for complete removal of existing treatment of wall surface and applying two coats of distemper oil emulsion over primer & including of 2mm thick wall care putty, complete all as speicied and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings, complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated etc) sheeting in roof covering, complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.
S&F for MS tubular pipes as in joist, channel, agnle, or tee sections, fixed independently, without connecting plates, etc., (Cut to ordinary lengths i.e. within 20mm of the length as indicate) in Fe-410W Gde E-250 quality 'B', complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to walls to make PVC frame as per specifications and drawing, complete all as specified and directed.
S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as per specification and drawing complete after dismantling of old unserviceble PVC lining, complete all as specified and directed.
M/S RAHUL GUPTA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .