Internal and External Renovation/ Upgradation of Block V, Scientist Apartment in CSIR-CLRI Staff Quarters, Adyar, Chennai-600020

Amount

Civil Part

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking in CLRI stores : Of area 3 sq. metres and below

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking in CLRI stores: Of area 3 sq. metres and below

Dismantling of flushing cistern of all types (C.I./PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / dry leaves similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground and or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.[ Rubbish must be taken out from the CLRI permises]

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length Sal wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked 100mm SS butt hinges bright finished of required size with necessary SS screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood ; 35 mm thick shutters

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including primer and putty: 35 mm thick including ISI marked 125mm Stainless Steel butt hinges with necessary SS screws

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including primer and putty: 30 mm thick including ISI marked 125mm Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets for each opening fixed with C.P.brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc.complete :250x16 mm

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing Ist quality Rectified ceramic glazed wall tiles conforming to IS : 15622, minimum thickness 5mm of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including PVC Corner beeding pointing in white cement mixed with pigment of matching shade complete. (Make: Kajaria or equivalent).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (Make: Kajaria or equivalent).

15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two coats

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. Make: Asian royale shine or equivalent

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.(Note: no extra will be paid for jali work/ pipe/boarder etc. Rate including one base coat+two coats)) Two or More coats Make: Asian Ultima Protek or equivalent.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete (rate including hold fast 40x5mm, 40cm long 3nos each side), including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete (rate including hold fast 40x5mm, 40cm long 2nos each side), including disposal of rubbish to the dumping ground within 50 meters lead : Door/windows chowkhats.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including (water washing for external wall) and necessary repairs to scratches etc. complete.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with cement based polymer modified self curing mortar (mixing with SPR), including disposal of rubbish, all complete as per the direction of Engineer-In- Charge.

Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm

Providing and fixing white vitreous china pedestal type water closet with P-trap/S-trap(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. Make: Parryware or Equivalent.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with G.I coated special clamps at 1.00 m spacing and required scaffolding upto floor 11 lvl. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25 mm nominal outer dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore.

Providing and fixing C.P. brass shower rose with arm15 or 20 mm inlet : 150 mm diameter

Providing and fixing C.P. brass bib cock with CP fittings of approved quality conforming to IS:8931 : 15 mm nominal bore Make: Jaquar or Equivalent.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore Make: Jaquar or Equivalent.

Providing and fixing C.P. brass angle valve with CP fittings for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore. Make: Jaquar or Equivalent.

Providing and fixing PTMT abs grating (with cockroach trap) of approved quality and colour. Circular type 100 mm nominal dia

Providing and fixing PTMT abs grating (with cockroach trap) of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 5.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. [Note: rates Including Scaffolding and Silicon Sealent.] Make: Fenesta or equivalent

Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. [Note: rates Including Scaffolding and Silicon Sealent.] Make: Fenesta or equivalent

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. [Note: rates Including Scaffolding and Silicon Sealent.] Make: Fenesta or equivalent

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. [Note: rates Including Scaffolding and Silicon Sealent.] Make: Fenesta or equivalent

Providing and fixing glazing in aluminium/UPVC door, window, ventilator shutters and partitions including louver glass etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . With float glass panes of 4.0 mm thickness. plain/pinheaded

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick. Make:STP or equivalent

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. For UPVC windows

Providing and fixing PVC floor Trap of Make: "Supreme" Size:- 110mm, Socket Type:- "S", Length:- 278mm, Depth of outlet:- 110mm & Height of Trap-118mm with necessary concrete bedding in floors with necessary cutting, placing, etc., complete all as required and directed by the Engineer-In-Charge.

Providing and fixing uPVC- SWR (sewage waste & Rain water) pipes for sewer lines - Type:B of \ISI : 13592 of approved make and quality with all necessary specials such as collars, elbows, bends, tees, doors Y's cowl cap, etc., using jointing ring with solutions for necessary scaffolding, making holes in the brick/RCC for pipe etc., complete with all lead lift and as directed by the Engineer-in-Charge. 110mm dia.

Providing and Fixing uPVC - SWR (sewage waste & Rain water) pipes for sewer lines - Type :B of ISI: 13592 of approved make and quality with all necessary specials such as collars, elbows, tees, doors Y's, door T`s ,cowl cap, etc., using joining ring with solutions for necessary scaffolding making hole in the Brick/RCC for pipeetc., complete with all lead and lift as directed by the Engineer-in-charge. 75mm dia.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, sheet properly joined with solvent cement adhesive as per sectional view.A mild steel square tube of size 19mm of 19 gauge is inserted inside to give extra structural strength. The door frame can be made with/without rubber gasket as required.if rubber gasket is not required then one strip of 5mm thickness can be eliminated and final size of choukhat will be 50mm x 42 mm.PVC door frame sections are cut in 45° and joined to each other perfectly 90°.'L' shape brackets made out of M.S.square tube are inserted inside the choukhat corners.These brackets are finally fixed using the steel screws from both the sides and including all necessary Aluminium fittings like tower bolt ,keel, Ms Screw handle etc complete as per manufacturer’s specification and direction of Engineer- in-Charge. Make: Rajshri plasti wood or equivalent.

Providing and fixing 30mm thick panel PVC door shutter with bend Beading consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm hickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. both side decorative profile door. Make:Rajshri plasti wood or equivalent.

Supplying and fixing Health facet of approved design including two in one bib cock as per direction of Enginner-in-Charge. Make: Jaguar or equivalent.

Removing existing APP Sheet preparing surface clean as directed by Engineer In Charge.

Providing and placing on terrace (at all floor levels) triple layer polyethylene water storage tank ISI marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including tank nipple, float valve, interconnection fittings and preparation of base support for tank (HDPE water tank). Make: Sintex or equivalent.

Dismantling Existing pipes of any diameter inlet and outlet pipes for GI/Pvc/SWR/CI all complete as per direction of site incharge (external work)including removal of clamps , making holes, fittings, removing&refixing water meter etc.,complete taking out the pipes of any diameter of size, manually/ by mechanical means including stacking of pipes in departmental stores as per direction of Engineer-in-charge.

Placing and removing on terrace (at floor five levels) available polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including dismantling G.I pipe etc for temporary water supply system as directed by Engineer-in-charge.(2x1000=2000 lit) Circular tank

Polishing on existing mosaic flooring with mechanical method using approved stain removal powder coating, repair with mosaic flooring with same materials, Final coat with wox polish, cleaning including skirting and staircase etc., complete as per direction of engineer in charge. required to give high gloss finish complete.(Note: Number of machine coats will be increased untill the entire strain removal or as per the direction of engineer. (No extra will be paid in this regards.)

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment. Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: Anti-Termite Treatment- Post Construction Operation Details (i) Drilling at every one foot interval at wall and floor junction. (ii) Drill depth 4-5 inches on both sides. (iii) chemical used- Imidachloprid 30.5 S.C.[Bayer India or equivalent] (iv) Chemical injection done very half an hour up to saturation point(min 4-5 times). (v) Complete electrical conduits /junction boxes chemical treatment.[oil based] (vi) Plugging of holes after chemical injuction. (vii) On completion of work a warranty for a period 5 years is given for the site. (viii) Dliute and injecting Chemical emulision for POST CONSTRUCTIONAL anti-termite treatment (Including the cost of chemical emulsion) (ix) Treatment of existing mansory using chemical emulsion @ one litre per hole at 300mm interval full depth of the hole with Imidachlopride chemical.The hole filled with white/grey cement as directed by the engineer-in-charge.

Providing and fixing C.P towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Make: Jaguar or equivalent

Repair and Replastering of chejja/sunshade including cutting(dismsntling) of concrete/plaster, making slope of top portion with concrete, plastering with polymer(Fosroc SPR or equivalent) modified repair mortar top and bottom of the chejja, providing drip mould of 25mmx25mm in the bottom, required water roofing material, required scaffolding upto floor five level etc all complete. As per the direction of engineer-in-charge. (Note: Rate including drip mould(25x15mm) and scaffolding)

Electrical Part

MODULAR LIGHT/FAN PT: Wiring for light / fan / exhaust fan / call bell point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size GI. box and earthing the point with 1.5sqmm. FRLS PVC insulated copper conductor single core cable etc., as required. Make: FINOLEX/ANCHOR ROMA/HAVALLS

MODULAR LIGHT/FAN PT: Rewiring for light / fan / exhaust fan / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable as earth wire existing surface / recessed medium class PVC conduit, but including modular switch, modular plate, suitable size GI. box and earthing the point with 1.5sqmm. FRLS PVC insulated copper conductor single core cable etc., as required. Make: FINOLEX/POLYCAB/HAVALLS/ANCHOR ROMA

MODULAR TWIN CONTROL LIGHT POINT: Wiring for twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable size GI. box and earthing the point with 1.5sqmm. FRLS PVC insulated copper conductor single core cable etc., as required . Make: FINOLEX/ANCHOR ROMA/HAVALLS

A.C. POINT: Supplying and fixing suitable size G.I box with modular plate and cover in front on surface/recessed including providing and fixing 25A socket outlet and 25A modular SP MCB,"C" curve including connections, testing and commissioning etc.as required. Make: Legrand/L&T/MK

CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required MAKE: HAVALLS/FINOLEX/POLYCAB 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required MAKE: HAVALLS/FINOLEX/POLYCAB 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required MAKE: HAVALLS/FINOLEX/POLYCAB 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

SINGLE PHASE DB: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240Volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolater) MAKE: L&T/LEGRAND/HAVALLS 12 way , Double door

ELECTRONIC BELL/BUZZER: Supply and fixing Electronic bell/buzzer suitable for single phase,230V, complete with connection,testing etc. as required. MAKE: ANCHOR/PHILLIPS/HAVALLS

MODULAR BELL SWITCH : Supplying and fixing following modular Bell switch on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND Bell push switch

SINGLE POLE MCB FOR DBs: Supplying and fixing 5 amps to 32 amps rating, 240 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. MAKE: LEGRAND/L&T/HAVALLS 5 amps to 32 amps Single pole

INCOMER FOR DB (ISOLATER): Supplying and fixing following rating, double pole, 240 volts, isolator in incomer for the existing MCB DB complete with connections, testing and commissioning etc. as required. MAKE: LEGRAND/L&T/HAVALLS 63 Amps DP

MODULAR 15A SWITCH : Supplying and fixing following modular switch on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND 15/16 amp switch

MODULAR 15A SOCKET : Supplying and fixing following modular socket on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND 6 pin 5/16 amp socket outlet

MODULAR 5A SWITCH : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND 5/6 amp switch

MODULAR 5A SOCKET : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND 5/6 amp socket

MODULAR TV ANTENNA SOCKET: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but modular plate etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND TV antenna socket outlet

ELECTRONIC FAN REGULATOR: Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections etc. as required. MAKE: ANCHOR ROMA/MK/LEGRAND

GI Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. MAKE: ANCHOR ROMA/MK/LEGRAND 2 Module (75 mm X 75 mm)

GI Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. MAKE: ANCHOR ROMA/MK/LEGRAND 3 Module (100 mmX75 mm)

GI Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. MAKE: ANCHOR ROMA/MK/LEGRAND 6 Module (200mm x 75mm )

LABOUR CHARGES FOR FIXING OF CEILING FAN: Installation, testing and commissioning of ceiling fan, including wiring in the suitable size of down rods with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated/PVC sheet cover on the fan box etc. as required.

LABOUR CHARGES FOR Fixing of Exhaust Fan: Installation of Exhaust fan in the exsting opening, including making good the damage, connection, testing, commissioning with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable etc. as required

Labour Charges for Fixing of louver/shutter for Existing exhaust fan: Extra for fixing the louvers/shutters complete with frame for a exhaust fan of all sizes

PVC BATTEN/ANGLE HOLDER: Supplying and fixing PVC batten/angle holder including connection etc.as required. MAKE: ANCHOR ROMA/MK/LEGRAND

LABOUR CHARGES FOR FIXING OF FLUORESCENT/MIRROR LIGHT FITTING: Installation, testing and commissioning of pre-wired, fluorescent/Mirror light fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connections with 1.5sqmm FRLS PVC insulated, copper coductor, single core cable and earthing etc. as required.

COPPER EARTH CONDUCTOR: Supplying and fixing of Earth connection from earth electrode with 6 SWG dia G.I. wire in 15mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

SINGLE ARM WITH LED FIXTURE: Supply,Installation,testing and commisioning of prewired,LED post angled type fitting with 40W LED lamp.The job including supplying and fixing of suitable size bracket with bolt,nut,washer with single armed G.I pipe,making the connection with 2.5sqmm FRLS PVC insulated copper conductor,single core cable to junction box.etc,as required. Make: Crompton/Philips/ Havalls.

REMOVAL OF ELECTRICAL ITEMS: Removing the existing connection,wires, unused metal enclosures, switch boards, fixtures,ceiling fans,exhaust fans,DB's.etc., and same have to be haneded over to department as directed by dept, Engineer.

Potential Earth Electrode: Provision of Potential Earth Electrode type (Chemical earthing), 3mtrs, 1.5 inch dia with Augur / Drill / Bore a hole of 8 - 10 Inch in diameter to a suitable depth of 3 meters (Electrode Length). The work includes refilling the empty space around the Earthing Electrode with the 2 bags of moisture booster (compound /soil mix), each termination should be with suitable brass bolt, nut & flat & spring washers of each run, testing earth resistivity of the Electrode and provision of 2'x2'x1' brick & cement chamber with 2'x2' RCC cover etc. as required. Make: Value Engineers/ Galaxy Earthing Electrodes.

CEILING FAN: Supply of ceiling fan with minimum 3 star rating, colour of gray/brown/ivory, 1200 mm sweep, double ball bearing (without regulator) etc., as required as directed by department. Make: Crompton /Usha/ Havells

EXHAUST FAN: Supply of 230mm Sweep Exhaust fan with metal type model for kitchen/bathroom complete with all accessories.. etc, as required . Make: Havells / USHA/ Almanord/Crompton

FLOURESCENT LAMP FITTING : Supply of 4ft flourescent fitting with suitable electronic ballast (Crompton/ Philips) to provide 1 no.of , 4 feet philips/Crompton tube lamps etc., as required. Make: Crompton/ Philips/Havells/Wipro

MIRROR LIGHT FITTING : Supply of 9W LED mirror light suitable fitting with suitable electronic driver (Crompton/ Philips) to complete with all assocessories etc., as required. Make: Crompton/ Philips/Havells/Wipro

prabu company