SPECIAL REPAIRS TO WATER PIPE LINE AND CONNECTED

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and as directed

M&L for tubular MS Pipes as in trusses / Rolled sections , cross beem , hip and jack rafters , vertical posts purlins where connected to common rafters fixed with angle cleats or connecting plates any similar work including welding, and all necessery works complete all as specified (grade of steel Fe-410- (Gde- E-250) quality- B ) complete all as specified and as directed

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic enamel paint over one coat of red oxide complete all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and as directed

S&F of aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

Taking down carefully loose and broken concrete by chiselling/picking etc upto a depth of 20 to 40mm from wall, ceiling, columns, beams,roof and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc. with removal of debries including necessary scaffolding etc. as required, complete all as specified and as directed.

M & L for applying one coat of anti corrosive primer @0.25 Ltr/Sqm to exposed surfaces of old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film as per manufacturer's instructions complete all as specified and as directed.

M &L for applying one coat epoxy bonding agent @ 1 ltr/2.6 Sqm or as per manufacturer's instructions to old concrete surfaces of RCC floors, columns, beams and similar structural members for bonding with new concrete complete all as specified and directed.

S&F of Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F in repairs Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge. (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, glass & aluminium wire cloth as applicable will be measured and paid separately as supplied only

Supply only Aluminium anodised 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed

Supply only 5 mm thick Plain sheet glass of any sizes complete all as specified and as directed

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L for Glazed Ceramic tiles in Vertical surface Coloured, of size 350 x 250x 7 mm 450 X 300X 7 to 8mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in CM 1:4 complete all as specified and as directed.

M & L For coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including15 mm thick screed bed or bedding layer in cm 1:6 etc. complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in Cement mortar/ cement lime mortar for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for external rendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair complete all as specified and as directed Note : WPC shall be measured and paid separately as supply only

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block wall or concrete surfaces finished even & smooth all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed

M&L for Preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed

Supply only water proofing compound conforming to IS-2645 1975 complete all as specified and as directed

M&L for Preparation of old plastered wall surfaces and applying one coats of acrylic emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and as directed Note : The rates are inclusive of Scaffoldings up to height 24 M as required

M & L for preparation of old distempered and painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M & L for preparation of old painted wood and wood based surfaces of any description not other wise described not exceeding 10cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and directed.

Supply and laying in repairs CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old steel water tubing of 15mm bore complete all as specified

Supply and laying in repairs of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old steel water tubing of 20mm bore complete all as specified

S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repairs CP Waste coupling for Sink/WHB complete all as specified and as directed

S&F in repairs CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rowel plug in wall, complete all as specified and as directed.

S & F repair Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type heavy duty, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed

S & F in repairs to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S & F in repairs to Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete

S&F in repair chromium plated health faucet with 1000mm PVC pipe for 15 mm bore with fittings complete all as specified and directed.

S & F in repairs 32/40mm dia PVC flexible Waste Pipe, 750 mm long fixed to Wash Hand Basin or Sink complete all as specified and directed..

S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and as directed.

S&F in 100 mm dia CP grating with/without hole incl joints with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed. Note : cement concrete shall be measured and paid seperately.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls/floor including necessary fittings and fixture complete.

S&F in reapir for 1000 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover and dismantling complete all as specified and as directed

M&L for Making arrangements for scaffolding in shafts/spot/ location of weed growth,spraying anti weed solution of Herabicide Glyphosate 41% orequivalent onplant /weed leaves without cutting/disturbing the plants on sunny weather and allow the plant /weed to dry for a period of 30 days and removing the weed incuding its root ,making good with CM 1:3 or with PCC 1:2:4(12.5mm graded aggregates)including 02 coats if acrylic paint complete all as specified.

M&L for demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and as directed

M&L for 75mm thick Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and as directed

M&L for 75mm thick Cement concrete in D2 type (1:4:8) using 40mm graded stone aggregate as in floor finish even and smooth with using extra cement complete all as specified and as directed

M&L for 18 mm thick HDF high quality boarding one side pre laminate (white) and other side plain to receive decorative laminations as in cabinates / shelves / wordrable / wall panelling / cupboards / work station incl fixed with necessary small fitting as required as per manufactures instructions complete all as specified and directed

M& L for decorative laminations 1 mm thick of surface finish , coloured and pattern as spproved, fixed with approved adhesive as per manufactures instructions complete all as specified and directed

S&F of stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and as directed

S&F of door closer hydraulically regulated designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg each all as specified

S&F of stainless steel heavy duty Telescopic channels for siliding arrangements of size 18-20 " for drawars , cabinets , and similar works with carying cpacity not less than 15 kg as specified

S&F of Magnet catch for cup boards of brass body and striking plate all as specified and directed

S& F of 75 mm thick heavy duty brass butt hinges bright polished complete all as specified and as directed

S& F of 100 mm thick heavy duty brass butt hinges bright polished complete all as specified and as directed

S&F of Brass locks for cupboards , drawers and similar work size 50 mm as specified complete all as specified and as directed

S&F of 75 mm Long Extruded brass modular decorative handles , fabricated type polished bright as specified

M&L for applying one coat of floor paint on paver block / chequered tiles including preparation all as specified and directed

Supply & laying and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 core, laid in duct / fixed on wall/trenches complete all as specified and as directed

Excavation in soft / loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed

Excavation in hard / dense soil Iincluding road cutting etc not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed

Returning filling using excavated soil including spreading levelling, watering and well ramming in layers n exc 25 cms all as specified and directed

Removal of surplus excavated material n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtrs above the starting point all as specified and directed

Supply, laying of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer die of 120 mm and inner dia 103 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified

M&L for earthing complete with Galvanised iron plate 60x60 cm x 6 mm thick electrode buried directly in ground (earth pit no less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.5 Mtrs below normal ground level connected to galvanised earth lead GI wire of size 4 mm dia by means of bolts, nuts, check nuts and washers all as shown in electrical plate no. 5 connected to earth test point and provn of GI pipe 20 mm dia medium grade for watering, GI pipe 15 mm dia light grade for earth wire protection all as specified and including excavation, earth work provn of earth pit, pit cover, CI funnel, wire mesh etc complete and testing on completion all as specified and as directed

Design, Supply, installing testing and commissioning factory fabricated out door type totally enclosed LT cubical panel board suitable size with busbar, conforming to relevant IS and protection class IP-65 ,dust,vermin and weather proof fabricated out of 3.15mm thick CRCA sheet duly powder coated ,mounted on 40x40x5mm MS angle iron frame,duly welded in shape and coated with two coats of synthetic enamel paint of approved colour over a coat of redoxide primer including necessary grouting of legs 300mm deep in ground in PCC 1:4:8 type D2 using 40mm graded stone aggregate ,panel base to be 500mm above ground level with suitable compartments for controls and Monitors including cable glands for incoming and outgoing cables,locking arrangement, including accommodating, supply and fixing the following accessories/items including necessary internal panel wiring with suitable size of Copper wire PVC insulated & sheathed multi stranded complete all as specified and as directed by Engr-in-charge.including Supply and fixing the following :-

Supplying, laying or fixing in replacement, GI water tubing, medium grade, of following size confirming to IS-1239 [Part-1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, etc laid in tenches / floors or fixed to walls / ceiling / roof etc including testing and taking up / down existing unserviceable GI tubing with fittings / connections, carefully from trenches / celiling /walls/roofs etc complete all as specified and as directed :-

20mm dia

25mm dia

40mm dia

50mm dia

80mm dia

100mm dia

150mm dia

S&F in replacement of Butterfly valve 100 mm bore flange type suitable for external bye pass arrangement including nut,bolts & washers etc complete all as specified and directed

All as per ser item No 75 above but 80 mm bore

All as per ser item No 75 above but 50 mm bore

S&F in replacement of Gun metal glove or gate valves 100 mm bore with iron wheel head,screwed both ends for iron pipe including taking down the unserviceable gate valve.

All as per item No 78.00 above but 80 mm bore

All as per item No 78.00 above but 50 mm bore

S&F in replacement of Gun Metal Foot valve of 50 mm bore all as specified and directed

M&L for precast cement concrete solid block masonry exc 10cm in width type C1, 1:3:6 (using 20mm stone aggregate) set in CM (1:6)

M&L rendering 10mm thick in CM (1:4) on fair faces of concrete internal wall surface finished even and smooth (without using extra cement) complete all as specified and directed.

M&L providing cement concrete Type B1 1:2:4 (using 20mm graded aggregate ) as in coping, bedplates, etc all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on fair face of concrete external wall surfaces finished even and smooth (using extra cement)

S&F in replacement of Rotational moulded polyetheylene (HDPE) Water Tanks, Cylindrical & Vertical Type, double layered, ISI marked, hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes, lid complete all as specified and as directed of following capacities :-

1000 Ltr capacity

2000 Ltr capacity

S&F in replacement of sluice valve suitable for bore pipe as shown below with stainless steel spindle and iron wheel head long body class PIN 1.6 complete with rubber gaskets, nut and bolts of suitable size, ISI marked conforming to IS-14846 complete including dismantling of unserviceable valve all as directed.

80mm bore

100mm bore

150mm bore

M&L in repair, Mild steel, plain, black sheet 3.15mm thick in cover to water tanks, cover to valve chambers, etc and in similar work, as per site requirement welded to frame, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members etc, with plain 40mm lap joints or welded / riveted seams including bending, turning up, mitred angles, stopped ends, outlets, locking arrangement etc and including preparation and painting with two coats of synthetic enamel paint black color/ shade over a coat of redoxide primer as required complete all as specified and as directed at site.

Supply, install, testing and commissioning with AMF panel diesel engine driven wheel mounted out door generating set of 5 KVA (4 KW) capacity of continuous rating at N.T.P, fully wired, 415 volts, AC 3 Phase 4 Wire 50 Hz, at a power factor of 0.8 lagging all as per IS-4722/2001, mounted on common base plate and directly coupled through flexible coupling/closed couple to diesel engine with Dunlop ;cushy foot mountings (anti vibration ) pad in an including acoustic insulated enclosure/canopy with 75 db Noise level at one meter distance from Gen Set suitable for 5 KVA DG Set complete all as per OEM specifications and all as directed by Engineer-in-Charge at site etc & consisting of the following :- (A) Diesel Engine : The Engine shall be vertical cylinder four stroke, 1500 RPM water cooled complete with water pump assembly Turbo charger, Battery charging alternator of 12Volts, instrument panel, Electronic in build, governor, starting battery suitable capacity of battery, suitable size of exhaust pipe of suitable size of length inclusive of exhaust coupling inside acoustic enclosure and residential silencer & pipe above canopy all as specified & directed by OEM and all other standard fittings/fixtures all as per OEM specifications complete as per IS-1602 for the Generator including the following:-

AC alternator (Brush less) :- The AC alternator (Generator) shall be designed for an output of 5 KVA (4 KW) at full load for continuous rating at 0.8(lag) PF, conforming to IS-4722 or BS-2613, RPM 1500, insulation class "F" including self exciting and self regulating control panel with all accessories, (a) Diesel Engine cable terminal box with suitable size of glands , earth terminal etc. complete all as per OEM specifications. control panel with all accessories,

(c) Fuel Tank (Service Tanks) :-The fuel tank shall be mild steel suitable to hold fuel for not less than 12 hours running capacity and shall be including fuel level indicator, fuel line from tank to the engine etc complete all as specified.

Supply, install, testing and commissioning of diesel engine driven out door type dewatering pump sets of capacity 05 HP/04KW, vertical, Air cooled , single cylinder ,four strock,1500rpm, hand start , 6.5 ltr fuel tank capacity ,80mm dia section and delivery having discharge 12.2 liters per second at 12 meter height portable type wheel mounted complete all as directed.

M&L for providing earthing complete with Copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to copper earth strip 20 x 3 mm by means of bolts, nuts, check nuts & washers of copper and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe up to 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc).

Supply and fix on-load changeover switch 415 V, 4 pole,63 A. with enclosure complete all as directed.

S&F copper strips 20x3 mm to connect DG sets laid on wall, trenches complete all as directed by Engr - in - Charge .

Sree Tirumala Enterprises

Island Agency