CERTAIN B/R REPAIRS SUCH AS FLOORING, JOINERY, PLASTERING, PLUMBING, SANITARY FITTINGS AND ROOF TREATMENT IN ZONE D AREA UNDER GE CHENNAI

Amount

M&L for PCC (1:5:10) type E-2 using 40mm graded brick aggregate as in foundation filling and mass concrete (as in sunken floor) all as specified and directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using old size fly ash bricks built in cement mortar (1:6) all as specified and directed.

M&L for brick work in half brick thick walls straight or curved on plan to any radius using old size fly ash bricks built in cement mortar (1:4) all as specified and directed.

S&F 2nd class hard wood boarding 30mm thick fixed with nails in any situation as in shelves of cupboard and similar works planed both sides fixed in repair complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4.0 sqm each along with fittings including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each including fittings complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each and resecuring in the same opening after cutting, easening etc. with new iron mongry complete as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc with new iron mongry complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, supplying and fixing in frame at site complete all as specified, directed and shown in sketch for item No. 8103 in SSR Part-II. Note: The quoted rates deemed to include 02 Nos of 125mm size aluminium anodised handle, 03 Nos of 100mm stainless steel hinges and 02 Nos. of 150mm size aluminium anodised tower bolt of extruded section per shutter.

S&F for 2nd class hardwood plain framed panelled shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F for 2nd class hardwood glazed and skeleton window/ ventilator shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 100mm long all as specified and as diercted.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolts of extruded section 100mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolts of extruded section 150mm long all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 75mm size all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size all as specified and directed.

S&F in repairs mild steel butt hinges, medium weight cold rolled 75mm size all as specified and directed.

S&F in repairs mild steel butt hinges, medium weight cold rolled 100mm size all as specified and directed.

S&F continuous piano hinges mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F extruded aluminium alloy handles cast type anodised 100mm size all as specified and directed.

S&F extruded aluminium alloy handles cast type anodised 125mm size all as specified and directed.

S&F in repairs extruded aluminium alloy handles cast type anodised 100mm size complete all as specified and directed.

S&F in repair extruded aluminium alloy handles cast type anodised 125mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 250mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples including taking out of old unserviceable wire mesh beading etc. complete all as specified and directed.

S&F Harrison rails 20mm dia mild steel CP with one pair of designed end brackets in each opening, stops rollers etc. fixed in repairs complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-0 or Fe 310-O complete all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and spintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing Fe-410-W (Gde E-250) quality- A complete all as specified and directed.

M&L 8mm dia TMT bars cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with MS wire annealed not less than 0.90mm dia as in stirrups, spacers etc. complete all as specified and directed.

S&F mild steel plain black sheet 1.00mm thick in wall cladding, steel gates and similar works, cut to size, hole punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints including bending or turning up etc. fixed in repairs complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ chajja, fixed with self tapping screws as per manufacturer’s instruction including taking down existing sheeting complete all as specified and directed.

M&L for repairs to steel gate of garages and garbage bins of area exc. 1.00 sqm but n. exc. 2.00 sqm by taking down the gate, welding the loose bolts, handles, hinges, hold fasts, tower bolts, flat bars etc. and welding and replacing with new ones including resecuring or easing or adjusting and greasing of all hinges and sliding bolts and finally painting the complete and refixing the gate complete all as directed. Note: Replacement of fittings like angle section, sheeting, handles, tower bolts, hold fasts shall be measured and paid for separately.

S&F pre-laminated particle board 18/ 19mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in cupboards etc. fixed in repairs complete all as specified and directed.

M&L cleaning surface of sunken floor portion with wire brush and washing with hydrochloric acid to remove dust, dirt, oil grease, loose particle etc. and applying a coat of water base acrylic polymer modified MIXGUARD AC @ 1KG per sqm as in part A (Powder ) and part B (liquid) in ratio (3:1) and providing 20mm thick rendering in cement mortar (1:4) as in sunken floor slab, walls mixed with and including integral water proofing compound as per manufactures instruction and finishing the surface even and smooth complete all as specified and directed. Note: Quoted rates shall be deemed to be inclusive of cost of water proofing compound (PIDI PROOF LW).

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection/ foot path etc. finished even and smooth without using extra cement complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L coloured glazed ceramic tiles 300mm x 200mm x 7 to 8mm thick or of size matching with floor tiles as in skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for 18 - 20mm thick machine cut granite slab (of any type), laid over and including 20mm thick cement screed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/ cooking tops including cutting and polishing etc. including necessary moulding on edges and ole for gas pipe complete all as specified and directed.

M&L chipping off loose concrete, broken plastering in chajjas, ceiling, fins and fascia carefully and applying one coat of rust remover using DR FIXIT rust remover and one coat of DR FIXIT PIDICRETE concrete MPB bonding agent and 20mm thick rendering in cement mortar (1:4) in two coats of 10mm each coat including three coats of white wash after preparation of surface complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:4) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: Quoted rates shall be deemed to be inclusive of cost of water proofing compound (PIDI PROOF LW).

M&L preparation of newly plastered or previously untreated surface of walls and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane as including hacking out old broken glass complete all as specified and directed.

M&L preparation of new wooden surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing surfaces of wood and wood based materials, steel and iron works new or old treating ends of posts backs of chowkats etc. with tar or coal tar black paint aura tarred exc. 0.1 Sqm but n. exc. 0.5 Sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc with tar or coal tar black paint aura tarred n.exc 0.1 Sqm each complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 64 above but 20mm bore.

All as per item No. 64 above but 25mm bore.

S&F 500 ltr capacity three layered rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity three layered rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F 15mm dia brass stop valve chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F PTMT ball valve with epoxy coated aluminium rod for 20mm bore pipe high pressure with polythelene high density float and screwed for iron pipe fixed in repair complete all as specified and directed.

S&F gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F gun metal globe or gate valve 25mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs cover for rotational moulded polythelene water storage tank of any capacity with locking arrangement and fixed in position complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including demolition and breaking up existing pipe complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) branch piece, Single `T' equal or unequal with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) branch piece, single `T' equal or unequal with access door complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) branch piece, single ‘Y’ equal or unequal with access door complete all as specified and directed.

S&F 110mm dia PVC (SWR) bend any radius all as specified and directed.

S&F 75mm dia PVC (SWR) bend any radius all as specified and directed.

S&F in repairs PTMT waste coupling (half or full threaded) of size 32mm (Minimum weight 40gms) suitable for wash basin, kitchen sink and urinal all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including joining with solvent cement 75mm dia of outlet complete all as specified and directed.

S&F in repairs PTMT shelf 18" long as per cat No. 191 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580 x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm including brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

S&F in repair 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F 32/ 40mm dia 750mm long PVC flexible waste pipe for sink/ wash hand basin all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F in repair PTMT bib tap standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight -90gms) complete all as specified and directed.

S&F in repairs 15mm dia PTMT stop valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F in repairs 15mm dia PTMT angle valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F in repairs stainless steel 1mm thick kitchen or laboratory sink with draining board with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel 1mm thick sink kitchen or laboratory overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm with plugs, washers, wastes including bedding in cement mortar on to dwarf wall or on cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F chromium plated wash hand basin two way mixer 2-in-1 system with provision of hot and cold water tap fixed in repairs complete all as specified and directed. Make: JAQUAR/ PRAYAG/ PARRYWARE/ H&R JOHNSON

S&F in repairs brass chromium plated wall mixer valve 3-in-1, fancy type with provision of hand shower and overhead shower both complete with 115mm long bend pipe, connecting legs and wall flange as per cat No. FLR-5281 of Jaquar or equivalent from PRAYAG/ PARRYWARE/ H&R JOHNSON complete all as specified and directed.

S&F in repairs brass chromium plated shower rose of size 125mm with swivel joints including shower arm 195mm long with bend of 45° with flange fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs 60cm long PTMT towel rail fixed with and including chromium plated brass screws and plastic cleats (minimum weight 190g) complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins/ arches/ pillars etc. but excluding ashlars facings, dressed stone work, precast concrete articles and disposing off the rubbish debris to distance exc. 1.50 KM and n. exc. 3.00 KM complete all as specified and directed.

Demolition of PCC in ground floor and paving n. exc. 15cm thick below or above ground level including removal of debris outside MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

high tech engineers and co

SK Guha and co

M/s.Jayam Constructions

G.L.THIRUMALAI NAIDU AND COMPANY

SEKARR AGENCIES