eNIT 88t Maint. of Civil Works in W. No. 37

Amount

Dismantling manually/mechanically including staking of service via material and disposal of un serviceable material with in 50mtr lead. Bituminus road

Providing under layer including preparation of ground 75mm thick (un compacted) layer of dry stone aggregate & grouted with sand. (Complete Job).

Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering -All work up to plinth level. 1:3:6(1 Cement: 3 Coarse sand: 6graded stone agg. 20mm nominal size) Crushed

Providing & Fixing of precast cement concrete paver tiles flooring 60 mm thick cement mortar 1:4 mix & joints to be filled with cement mortar 1:3 mix (Complete Job).

Steel work welded in built up section / framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railing, brackets, gates and similar works

Removal of Excavated mulba dismantled unserviceable material from the site of work by mech. Transport / Animal Transport or otherwise including loading complete job.

Earth work in 1.excavation by manual means over areas (exceeding 30cm and up to 1.5 mtr in depth,1.5 mtr in width as well as 10 sqm on plan) Including disposal of excavated earth up to 1mtr.from cutting edge, disposed earth is to be leveled and neatly dressed in All kinds of soils

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 m lead.1:3:6 or richers mix.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. In cement mortar

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. • New work (two or more coats) over and including priming coat with cement primer.

12mm Cement plaster of mix. 1:6 (1cement :6Fine sand)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade. New steel work (two or more coats)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade • Old steel work (one ore more coats)

Engagement of labour for site clearance and l (Complete Job).

Providing & laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and Reinforcement-All work up to plinth level.1:2:4(1Cement: 2 Coarse sand: 4 graded stone agg. 20mm nominal size).

Centering and shuttering including strutting, propping etc and removal of the form work for Walls any thick including attached pilasters, buttresses, plinth and string courses etc.

Centring and shuttering including strutting propping etc. and removal of form work for ; • Columns, piers, abutments, pillars, posts and struts.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars.

filling of good earth including watering, ramming, dressing and carriage, lead and lift complete job.

P/F stainless steel benches for 3 seater as per approved quality a design Complete job

Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering -All work up to plinth level. 1:5:10 Cement: 5 Coarse sand: 10graded stone agg. 40mm nominal size).. Crushed

Brickwork with common burnt clay F.P.S (non modualar) bricks of class designation 75 in foundation and plinth in 1cement: 6 coarse sand mortar.

Centering & shuttering (form work ) including strutting propping etc. & removal of form for:foundations, footings, bases of columns etc for mass concrete

Providing and fixing of water Motor 0.5 H.p ISI mark incl. P/F of pipe andother fittings reqd. for motor as per direction engineer in charge complete job.

Finishing walls with water proofing cement paint of required shade. • New work (two or more coats) applied @3.84 Kg/10 Sqm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead. For thickness of tile above 25mm and up to 40mm.

Providing and fixing of innaugration plate complete job as per direction engineer-in charge.

Carriage of materials by mechanical transport including loading / unloading & stacking complete.  Brick for an average distance of 15 kms

Carriage of materials by mechanical transport including loading / unloading & stacking complete.  Stone aggregate below 40mm Nominal size Crushed for an average distance of 10 kms.

Carriage of materials by mechanical transport including loading / unloading & stacking complete.  Sand for an average distance of 5 kms

VIJAY CHOPRA CONTRACTOR

Karam Veer Singh