PETTY REPAIRS/DAY TO DAY MAINTENANCE LIKE

Attending day to day complaints to carry out petty repairs related to water supply & plumbing work such as leakage of bib cock / pillar cock / stop cock angle valve, wall mixer, shower rose, health faucet/Jet spray, including removal of air lock/blockage of water in GI tubing of any description changing the washers, clearing of air lock in the pipe, leakage of low level or high level flushing cistern by adjusting the float valve including removal and replacement of rubber washer in PVC siphons, adjusting the float valve of over head tanks, leakage of PVC bends/galvanised iron pipes etc., All T&P such as die set, washers of all size etc including necessary form work and scaffolding upto second floor, safety measures to make functional and leak proof, all petty materials like taflon tape, M-seal, screws, nails, cap etc. are deemed to be included in the unit rate quoted by the contractor on all working days from 0900 hrs to 1700 hours complete all as directed.

Attending and rectify day to day complaints related to joinery work such as repairs to door, windows, cupboard, kitchen shelves, pelmet boxes, curtain rod/bracket, easing of doors windows etc as ordered/required on all working days (Except Sunday & gazette holidays) 0900 hrs to 1700 hrs complete all as specified & directed. Note for Item No. 1 to 2:- (i) Contractor or his supervisor/site Engineer will report daily at 0900 hrs at complaint cell for collection of complaints from the concerned JE in-charge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE than after to Engineer in charge by the contractor/ his rep immediately. If Engineer-in-charge is satisfied with contractor's view, no recovery will be made on this account. However complaints related to sewage line blockage /pipe replacement etc whatever is applicable shall be attended on same day whether it is "Sunday" or "Gazetted Holidays" and nothing extra shall be payable to contractor on this account. (ii) Contractor or his supervisor / site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaints register, issue of complaints slip to tradesmen and enter after completion in complaint register as instructed by JE,s. In case of absense of contractor rep for noting complaints, a penalty of Rs 500.00 per day will be deducted from the contractor bill. (iii) The complaint shall be attended & defects shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a Penalty @ Rs.500/- Per complaint per day (08 hrs) shall be levied upon / imposed on the contractor and necessary recovery shall be made from his dues on this account. (iv) The above all aspect shall be deemed to be included in the quoted rate of the respective item.

S&F in repairs of brass face spindle suitable for make jaquar, cera, sieko and zollota, etc of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description complete all as specified and directed.

Removal of air lock/blockage of water in GI Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed

M&L for glazed ceramic colour designer concept glazed ceramic tiles in patches n exc 5 sqm each & matching with existing tile as in walls set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc including dismantling of skirting/ dado (terrezo/PCC/tiles of any description) including cement mortar bedding but not backing) including dismantling and removing the rubbish from the complex complete all as specified and directed

S&F in repairs 15mm bore CP health faucet including necessary holding arrangements with screws etc all as specified and directed

Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards /slabs blankets, including cover fillets and frame work all as directed

S&F 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and including fixing cleats screws including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc all as specified and directed.

S&F for 8mm thick 'E' board (non-asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified and directed.

S&F in repair Stainless Steel Soap Dish Holder all as specified and directed.