Renovation/Improvement and water proofing of Generator Room of 75 BN BSF under SHQ BSF Gopalpur(Sh Providing of Lightning conductor and Security Lights)

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group - B

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

(2+12) way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole,(single phase na dneutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2x25(22 mm)

Providing and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor armored power cable of 1.1 KV grade (Havells/Finolex/Polycab) of following size in the existing RCC/HUME/METAL pipe as required 2 X 25 Sq.mm

Supplying, Installation, testing and commissioning of 1200 mm sweep, White, double ball bearing ceiling fan, including wiring the down rods of standard length (upto 30 cm) including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.(Make-Orient Electric, Rapid Air or equivalent specification of Make-Havells/Khaitan/Polar/Usha/C&G).

Supplying, Installation, testing & Commissioning of 45 Watt rating LED street light luminaire, out door type with pressure die cast aluminium housing & heat resistant glass, IP65 protection, suitable for single phase, 50 Hz AC (Make Crompton model- LSTS-45-CDL), including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, earthing with Supplying and fixing of 32 mm dia X 1.0 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting directly on pole, bending the pipe to the required shape including suitable size flat iron clamps with nut & bolts, washer etc. as required.

Supplying, Installation, testing & Commissioning of 18/20 W LED Tube Light (Make-Havells-Havells-LUMILINE PLUS NEO or equivalent specification of Make- Crompton/Philips/ SYSKA /Wipro) directly on ceilling / wall including connection with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, earthing etc. as required.

Providing and fixing LED lamp, 9/10W suitable for single phase, 50 Hz AC , including connection (Make- Havells-Havells, LED ADORE PLUS 9W E27 CDL 3 STAR LAMP or equivalent specification of Make-Philips/Crompton) on existing lamp holder etc as required.

Supplying and installation of Exhaust fan, 300 mm sweep, Single Phase 240 V AC including making the hole by cutting the wall to suit the size of the above fan , connection, testing, commissioning etc. as required. (Make-Orient-Spring Air Exhaust or equivalent specification of Make-Havells/Usha/Philips/Luminous)

Supplying and installation of Exhaust fan, Heavy Duty Type, 450 mm sweep, Single Phase 240 V AC including making the hole by cutting the wall to suit the size of the above fan , connection, testing, commissioning etc. as required. (Make-Orient-Spring Air Exhaust or equivalent specification of Make-Havells/Usha/Philips/Luminous)

SITC of 250 Watt HPSV/MMH integral flood lighting system with black poweder coated die cast aluminium housing with built in control gear aluminium reflector heat resistance toughened glass cover complete with connection etc, or same specifications (Havells,Crompton,Bajaj/Surya/Philips)as required.

Providing and fixing of 160 Amp Four pole onload changeover switch(open execution), Make- L&T, Model No. C02 160 or equivalent make including connection etc as required.

ABHIJIT DASGUPTA

M/S GANESH ELECTRIC CO