Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC NOT SPECIFIED | L1 | Accepted-AOC being L1 Accepted | |
| 2 | L2₹37 L+₹62,583 (1.72%)Rejected-AOC 325 PANCHWATI ENCLAVE SHATABDI NAGAR DELHI ROAD MEERUT UP 250103 | MEERUT | UTTAR PRADESH | 250103 | L2 | Rejected-AOC being L2 Rejected | |
| 3 | L3₹38.4 L+₹2.0 L (5.57%)Rejected-AOC NOT SPECIFIED | L3 | Rejected-AOC being L3 Rejected | |
| 4 | L4₹38.5 L+₹2.1 L (5.84%)Rejected-AOC 96 4 PHOOL BAGH COLONY MEERUT 250002 | MEERUT | UTTAR PRADESH | 250002 | L4 | Rejected-AOC being L4 Rejected | |
| 5 | L5₹38.9 L+₹2.5 L (6.85%)Rejected-AOC | L5 | Rejected-AOC being L5 Rejected |
Tender Value
₹48.5 L
EMD Value
₹96,900
Closing Date
18 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Meerut Cantt
Garrison Engineer (South) Meerut Cantt The Mall Road Meerut Cantt Distt Meerut-250001(UP)
SPL REPAIR TO BLDG NO E-61 STN ROAD OF INF DIV UNDER AGE B/R-III OF GE(SOUTH) MEERUT CANTT
2023_MES_585588_1
GE/MRT/S/8037/2022-2023
Open Tender
Civil Works
Item Rate
150 days
Meerut Cantt
Please prefer tender documents
11 documents required · 11 mandatory
₹500
GE (South) Meerut
₹96,900
Yes
20 May 2023
13 Mar 2023
20 Apr 2023
13 Mar 2023
18 Apr 2023
28 Mar 2023
14 Mar 2023 - 25 Mar 2023
Amount
Taking down of chowkhat with shutter (without taking off shutters from the frame) area n.exc 1.5 sqm each complete all as spd and directed
Taking down of chowkhat with sutters (without taking off shutters from the frame) of any description exc 1.50 sqm but n-exc 4.00 sqm each complete all as specified and directed.
Supply and fixing powder coated anodized aluminium door made out of hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disc or D type handles, 02 Nos aluminium tower bolts 200 mm size, one aluminium sliding door bolt of 250 mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5mm thick tinted glass and partly panelled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws complete :- Chowkat frame : 110.60 x 44.45 x 1.55 mm, Shutter vertical / stile : 85 x 44.45 x 1.54 mm, Shutter middle rail : 83.50 x 44.45 x 1.54 mm, Top and bottom rail : 1.15 x 44.45 x 1.54 mm, Make (i) Anodised aluminium section: Jindal/HINDALCo/INDALCo (ii) Particle board: NOVAPAN, DURATUFF (iii) Glass: SAINT GOBAIN/MODIGUARD/TATA
Supply and fixing powder coated aluminium sliding/openable, window/ventilator made out of hollow extruded aluminium sections as mentioned below and glazed with tinted glass 5mm thick fixed with glazing clips rubber beading / gasket anodised aluminium beading screws and lock type handles of size 75 mm 2 Nos aluminium tower bolts 150 mm long etc complete all as specified and directed by Engr-in-charge. Shutter top and bottom size : 37.50 x 15 x 1.60 mm thick Shutter inner lock size 37.50 x 15 x 1.60 mm Shutter side (handle) size 37.50 x 15 x 1.36 mm Chowkat bottom size : 50.30x26x1.20 mm Chowkat top & sides : 50.30x15x1.00mm Make (i) Anodised aluminium section : Jindal/HINDAL Co/INDAL Co (ii) Glass : SAINT GOBAIN/MODI GUARD/TATA
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as spd and directed.
Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as spd and directed.
S&F for 600x600x8 to 10mm thick vitirified tiles of apporoved colour laid in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 10mm thick CM (1:6) as screed plaster complete all as spd & directed. (Make:- Kajaria/Somany/Johnson/Orient)
All as per serial No. 07.00 here-in-before but in skirting / dado and including 10 mm thick plaster CM1:6 complete all as specified and directed. (Make-Kajaria/Somany/Orient).
Demolition of plain cement concrete of any description and in any position not otherwise specially provided for complete all as spd & directed.
M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed.
M&L Cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc complete all as specified and directed.
Dismantling of Plain or corrugated steel/ac sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. Note:- All scaffolding and safety arrangement will be done by the Contractor at site complete all as spd and directed.
Supply and fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.
Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm framed work and over in section, in any position complete all as specified and directed.
Supply and fix structural steel work for in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240complete all as specified and directed.
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, Fe 410-W (Gde-E-250) quality Awithout any attachment complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.
Supply and fixing for anodised GI snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as spd & directed.
Material and labour for 4mm thick ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as spd & directed.
S&F Brand Facroty Made 18mm thick 100% Solid WPC (Wood polymer Composite) plain Board of reqired size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate complete all as spd & directed. Note:- Glass shall be paid separetely.
Demolition of brick work built in cement mortar of any description complete all as specified and directed.
M & L Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as spd & directed.
Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as spd & directed.
Material and labour for rendering 15mm thick on brick or concrete wall surfaces of any description in cement mortor (1:6) finished even and smooth without using extra cement complete all as spd & directed.
Materials & labour for preparation of new/old plastered surface of walls etc and applying two coats of OBD over and including a coat of Birla/JK wall care putty to match the existing surfaces of wall as required complete all as spd & directed Make : Asianpaint/Berger.
M&L for complete removal of exisitng treatment on external wall surfaces by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Applying a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of exterior grade weather proof acrylic emulsion paint incl on newly plaster as per manufactures instruction and completed all as spd & directed. (Note- The acrylic paint shall be applied by mechanically airless paint sprayer machine only and throgh applicator.)
Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of surface over 10cm width or girth complete all as specified and directed by Engr-in-charge.
M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 75 mm x 75 mm with beading including aluminium channel of suitable size thickness of channel 1.5 mm complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples in steel widows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12x5mm complete all as spd and as directed.
Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including new PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly One light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed .
All as per item No 32.00 above but One fan point controlled by one, one way switch 05 / 06 Amps.
All as per item No 32.00 above but one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.
All as per item No 32.00 above but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.
All as per item No 32.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.
Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge .
Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.
Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed by Engineer-in-Charge.
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed.
Supply and fix LED lamp 9/10 watt of make:- Havells, /Phillips/ Crompton/Surya
Supply and fix decorative LED Batten 20 Watt aluminium housing integtrated type complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Havells equivalent in Crompton/Surya/phillips
Supplying and fixing LED tube light fitting 9/10 watt surface mounted,with extruded polycarbonate , integrated lamp & driver , with opal diffuser and decorative end plates.complete with acessories all as specified and directed by Engr-in-Charge. Make Havells/CROMPTON/ Surya/Philips
Supply and installed LED security light fitting 1x30 Watt luminaries with pressure die cast aluminium housing comprising high power with PC cover with LED driver , IP-66 Protection and IK-07 Impact resistance complete IP 65 protection. : Make:- Havells ,Crompton / Surya / Phillips.
Supplying and fixing LED bulk head light fitting wall mounted with back lit LED 10 watt, IP-66,complete with all acessories all as specified and directed by Engr-in-Charge Make- Havells / equivalent in Phillips/ Crompton/Surya
Supplying and fixing recess mounting LED 2X2 luminaire 36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame, including all acessories all as specified and directed by Engr-in-Charge. Make-Havells,crompton/ Phillips/Surya
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site to store for keeping in safe custody for reuse at site making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including four pole MCB 100 Amps with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. Make Legrand/ABB/ Schneider/Indoasian
Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 125 Amps ,25 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed by Engineer - in - Charge. Make :- ABB/ Havells/ Legrand/ Schneider/Indoasian
Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. Make- Schneider / Legrand /ABB/Indoasian
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed. Make Schneider /Legrad / ABB /Indoasian
Supply & fix Isolator 4 Pole 'B' series 100 amps capacity AC 415 V, 10kA complete all as specified and directed Make Schneider/ Legrad / ABB /Indoasian
Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed
Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed
Taking out old unsv LT cable any size and Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 95 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed
Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed.
M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed by Engr-in-Charge.
Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed.
Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
Supply and fixing of ceiling fan BEE 3 star rated power consumption not more than 42 Watts, white colour, 1200 mm sweep, copper winding, single phase, 220 volts, 50 Hz, with blade set of 3, with down rod as per site requirement including connection three core flexible copper wire 0.75 Sqmm multistranded from ceiling rose to fan connector complete all as specified and directed. Make - Havells or equivalent in Crompton/Orient/Bajaj/Usha
supply and fix wall fan 400 mm sweep copper wounded with pull cord to control speed and oscillation,three blades,230 volts,50 Hz ,speed not less than 2000 RPM, air delivery not less than 90 CUM not more than 110 watt including all accesories for fixing it on wall complete all as specified by Engr-in - charge. . Make - Havellls /orient /crompton/USHA/Bajaj
Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed . Make ABB/ Havells/ Legrand/ Schneider/Indoasian
M & L for MCCB 4 pole 250 A 25 KA fixing including sheet metal enclosure , 415 volts , 50 Hz ,using thimble/lugsproperly, flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing surface complete all as directed by Engineer - in - Charge. Make :- ABB/ Havells/ Legrand/ Schneider/Indoasian aslo including all nuts bolts required for fixing all as specified and directed by Engineer - in - Charge .Make :-ABB /Schneider/Legrad/ Indosasian
M/S Keshav Brothers
M/S AMAR ELEKTRO CENTRE
Tayal Builders
Madan Lal Jain and Sons
Rajneesh Jain
R.D.Builders
SA construction co.
VIRAT CONSTRUCTIONS
Shikha Enterprises
Jay Ambay Enterprises
Manglam Engineers and Construction Co
B.K.construction
High Tech Metal India
Shikhar ji Enterprises
M/S AGARWAL CONSTRUCTION CO.
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .