Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹7.4 L
Closing Date
10 Dec 2026, 5:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Cauvery Neeravari Nigam Limited
Krishnamurthy
Rehabilitation and Improvement works to Suvarnavathy Dam under World Bank aided DRIP-II and III (PART-A) (Package-1).
CNNL/2026-27/DA/WORK_INDENT5450
CNNL/2026-27/DA/WORK_INDENT5450
Open
Dam and Allied works
Two Tender Document System(Two Cover)
CNNL KC Div Nanjungud
11 documents required · 11 mandatory
A minimum number of one similar contracts -Rehabilitation and Improvement works to Dams-that have been satisfactorily and substantially completed as a prime contractor, joint venture member, between 1st April, 2019 and bid submission deadline:(1) ONE contract, each of minimum value 594.39 Lakhs (80% of the Estimated Value) OR (2)TWO contracts, each of minimum value 445.79 Lakhs (60% of the Estimated Value) OR (3) THREE contracts, each of minimum value 297.19 lakhs (40% of the Estimated Value).
For the above and any other contracts (substantially completed and under implementation) as prime contractor, joint venture member or Sub-contractor between 2019-20 and application submission deadline a minimum construction experience in the following key activities successfully completed (1) Providing & applying poly ironite Ceramic cementatious (PICC): 1008.00 Sqm (2) Providing and laying In-situ cement concrete: 1179.47 Cum (3) Providing 75mm thick shotcreting: 995.40 Sqm (4) Cleaning Concrete / Masonry: 4304.58 Sqm (5) Grouting the body of the dam through concrete/masonry: 78.00 Tonne.
Experience under construction contracts such as -Rehabilitation and Improvement works to Dams- in the role of prime contractor, JV member, subcontractor, for at least the last seven years, starting 1st April 2019.
Bidders who meet the minimum qualification criteria will be qualified only if their available bid capacity for construction work is equal to or more than the total bid value of the work. The available bid capacity will be calculated as under: Assessed Available bid capacity (AxNx1.15-B) Where, A-Maximum value of civil engineering works executed in any one year during the last seven years (updated to the price level of the financial year 2026-27 at the rate of 5% per year), taking into account the completed as well as works in progress). N-Number of years prescribed for completion of the works for which bids are invited (period upto 6 months to be taken as half-year and more than 6 months as one year). B-Value, at the current price level, of existing commitments on on-going works to be completed during the period of completion of the works for which bids are invited.
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded. The Bidder must demonstrate that it will have access to the key Contractors equipment listed as per qualification criteria section-4 Equipment in the bid document. (1) Pneumatic Grout Pump-2Nos (1-Own & 1-Lease/Rent) (2) Screw Compressor-2Nos (1-Own & 1-Lease/Rent) (3) Diesel Generator min 30 KVA-1No (1-Own) (4) Concrete mixer (Own-1, Rent/Lease-1) (5) Tipper (Own-1, Rent/Lease-1) (6) Asphalt Paver machine-1 (O/R/L) (7) Drilling and reaming equipment (Own-1, Rent/Lease-1) (8) Shotcrete equipment (Own-1, Rent/Lease-1) Note:Availability (either owned or leased) of equipments such as suitable capacity and number of Excavator, tippers, Concrete mixer, Air Compressor, Vibratory roller/Jack hammer, Needle vibrator, Electrically operated rotary drilling machine, etc as required along with the equipments already mentioned in the bid document.
The Bidder shall demonstrate that it has access to, or has available, liquid assets, unencumbered real assets, lines of credit, and other financial means (independent of any contractual advance payment) sufficient to meet the construction cash flow requirements estimated as Rs.185.74 Lakhs about 3 months cash flow at peak construction period) for the subject contract(s) net of the Bidders other commitments.
The Bidder shall provide details of the Key Personnel and such other Key Personnel that the Bidder considers appropriate, together with their academic qualifications and work experience. The Bidder shall complete the relevant Forms in Section-4, Bidding Forms. The key personnel requirement is as per qualification criteria of Section-3 Key personnel. (1) Construction Manager-1 No BE (Civil)-10 Years Experience (2) Grouting Specialist-1 No BE (Civil)-10 Years Experience (3) Site Engineer-1 No BE (Civil)-5 Years Experience (4) Site Engineer-1 No BE (Electrical)-5 Years Experience (5) Quality Control Engineer-1 No BE (Civil)- 3 Years Experience. (6) Surveyor -Diploma (Civil)- 3 Years Experience (7) Safety, Environment & Social Expert (Need Based)- BE Civil/ Graduate in Environment/ Health- 1 Year Experience.
Minimum average annual construction turnover of Rs.1485.98 Lakhs calculated as total certified payments received for contracts in progress and/or completed within the last seven financial years, divided by seven years.
NIL
NIL
NIL
NIL
NIL
NIL
NIL
₹5,000
₹7.4 L
5 Nov 2026
5 Nov 2026
14 Dec 2026
25 Nov 2026
25 Nov 2026
Rehabilitation and Improvemet works to Suvarnavathy Dam under World Bank aided DRIP-II and III (PART-A)
Removing the mosaic tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost o...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includi...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications. Complete with all lead and lifts and...
Painting (one coats) with black Japan paint of approved brand and manufacture to give an even shade. including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and ...
Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out shoring,strutting, barricading, caution light...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable m...
Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
Removing & refixing Boundary pillars/Guard stones/KM Stones/200m stones etc in complete manner embedded in Earth excluding painting. Complete with all lead and lifts and as directed by Engineer-in-cha...
Cleaning concrete / masonry / rock surface for guniting / shotcreting by sand blasting method and cleaning by air and water jets after sand blasting as per specifications including cost of all materia...
Providing 50 mm deep cement mortar pointing to face stone masonry in CM 1 : 2 proportion by volume including cost of all materials, labour, raking-out and cleaning joints, pressing mortar into joints,...
Providing and constructing 150 mm dia hume pipe weep holes for concrete /masonry walls including cost of all materials,machinery,labour, providing 200 x 200 x 200 mm size porous concrete block made of...
Providing & applying of horizontal grouting through inserted pipes on the upstream face of the masonry dam with Poly Ceramic Cementitious materials with non-shrink admixtures as per site using groutin...
Drilling 76 mm dia ( NX ) core hole in hard rock using diamond core bit vertical / inclined upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water charges, co...
Drilling 47 mm dia ( BX ) core hole in hard rock using diamond core bit vertical / inclined upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water charges, co...
Flushing grout holes of all sizes with water and air jets alternatively for an average period of 30 minutes and observing water intake after flushing including cost of all materials, machinery, labour...
Grouting (in metric tone): Grouting the body of the dam through concrete/masonry in specified intervals or as directed from top of Dam (after completing cleaning the holes with air and water loss test...
Providing & applying poly ironite Ceramic cementatious (PCC) or equivalent repair mortar for resurfacing on concrete upstream face, jack well, piers etc up to 10 mm thickness of dam section above MDDL...
Re-constructing dry rubble rock-toe including filter media below /behind rock-toe consisting of sand 20 mm and 80 mm down graded aggregates satisfying specified filter criteria laid in layers of 150 m...
Re-constructing 600 mm thick hand packed rough stone revetment with through stones at 1.50 m c/c over a backing of 450 mm thick graded filter media consisting of sand, 10 mm and 40 mm down graded aggr...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Dismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cement concrete,wood work, steel work, including T&P and scaffolding wherevernecess...
Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for RCC ornamental parapet consisting of 350 x 200 mm kerb, 350 x 350 x 1000 m...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Reaming/re-drilling of 200 mm dia hole in open area from dam top in downward direction including cost of materials, machinery, labours, water charges etc.,Complete with all lead and lifts and as direc...
Reaming/re-drilling of NX size hole in gallery foundation drain in downward direction including cost of materials, machinery, labours, water charges etc., Complete with all lead and lifts and as direc...
Cleaning drainage gallery, adits, instrumentation galleries etc.,by scrubbing / brushing including chiselling and removing leached lime deposit and disposing off all the waste material out side adits...
Supply of 10 HP/7.5 KW stage 16 submersible motor pump to dewater seepage water from drainage gallery. Complete with all lead and lifts and as directed by Engineer-in-charge.
Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to IS:8130-1984 and virg...
Dewatering the tunnel by pumping out water colleted by natural drainage inside the tunnel including cost of all materials, machinary, labour drainage, ventilation,lighting ,drainage, providing sump a...
Excavation and removal of silt and silt mixed with sand in slussy condition from canal bed including disposing off the same in spoil bank or on the canal embankment in layers as directed etc., with al...
Providing and laying Insitu vibrated M-60 grade silica fume based fibre reinforced cement concrete using 20mm downsize approved, clean, hard, graded aggregates including cost of all materials, machi...
Providing 75 mm thick shotcreting in layers to concrete/masonry surface in cement concrete 1 : 2 : 2 proportion by weight using 6 mm down clean, hard, graded aggregates including cost of all materials...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) Complete with all lead and lifts and as directed by Engineer-in-charge.
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bituminous Emulsion on prepared surface of granular Base including cleaning with mechanical Broom of road surface and spraying primer at the rate of 0...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Complete w...
Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported t...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. Size 300 x 3...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...
Design, fabrication, supply, erection and commissioning of vent liner using 20 mm thick plates with stiffeners and anchors for river sluice / canal sluice vents including cost of all materials, machin...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting b...
Design, fabrication, supply, erection, testing and commissioning of adequate capacity rope drum hoist consisting of hoist platfom, rope drum, gear system, electric motor, electro-magnetic brake system...
Fabrication, Supplying, Erection, Testing and Commissioning of ……Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top sectio...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000mm Stand...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Laying of 11 kV cables in existing trench/G.I. pipe/stoneware pipe/RCC hume pipe using wooden/aluminium rollers as directed by KPTCL staff -95 sqmm to 150 sqmm, Complete with all lead and lifts and as...
Supplying Sand M-Sand. Complete with all lead and lifts and as directed by Engineer-in-charge.
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required- 25x3mm GI strip, Complete with all lead and lifts and as directed by Engineer-in-char...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required- 25x3mm Copper strip, Complete with all lead and lifts and as directed by Engineer-in-...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing/replacement of Round/conical/Diamond shaped HDPE doom suitable for 125/160 watts post top lamp fittings. Complete with all lead and lifts and as directed by Engineer-in-charge.
Fabricating supplying and mounting MS box made out 14SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50...
Supplying 100Amps 4x30x6mm Aluminium Strips amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on ph...
upplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA. 63 Amps TP, Complete with all lead and lifts and as directed by Engineer-in-charge.
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 Amps...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts,nuts and washers etc.,.) 3-120sec setting, Complete with all lead and lifts and as dir...
Supplying & Fixing of 70W Metal Halide single end tubular Lamp with lumen output of 6400 lumens & CCT 3000/4000 & CRI 80+ & Avg life greater than 15000 to 20,000 Hrs. with Cap Base E27. Operating volt...
Supplying & Fixing of Open Type Heavy Duty Ferromagnetic Copper Ballast for HPSV/HPMH lamps: Supply of High Intensity Discharge Electro Magnetic Ballast suitable for ...W sodium vapour / Metal Halide ...
Supplying & Fixing of Ignitor Suitable for 70 to 400 Watts SV/MH fittings. Operating voltage range from 180V to 265V, 50Hz AC power Supply SV Ignators, Complete with all lead and lifts and as directe...
Supplying & Fixing of 70-150 Watts lamp holder 2 Pin SV Portion holder, Complete with all lead and lifts and as directed by Engineer-in-charge.
Supplying & Fixing of 150W Metal Halide single end tubular Lamp with lumen output of 14500 lumens (150W) & CCT 3000/4000 & CRI 80+ & Avg life greater than 15000 to 20,000 Hrs. with Cap Base E40 Operat...
Supplying & Fixing of High Intensity Discharge Electro Magnetic ballast suitable for Mercury Vapour Lamp with Class H insulated copper wire. Operating voltage range from 180V to 265V, 50Hz AC power Su...
Supplying & Fixing of 400W Mercury Blended lamp with E27 Base, Lumen output greater than 3000 lumen & CRI 52.Avg Burning life greater than 8000 hrs. Operating voltage range from 180V to 265V, 50Hz AC ...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 63 AMP, Complete with all lead and lifts and as directed by Engine...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panelboard using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Ov...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 Amps 4 pole, Complete with all lead and lifts and as directed by ...
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers- channel, Complete with all lead and lifts and as directed by Engineer-in-cha...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate, Complete with all lead and lifts and as directed by Enginee...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip, Complete with all lead and lifts and as directed by Engineer-in-char...
Supplying & fixing of retrofit type-LED bulb...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI(greater than)70%. efficacy(greater than)80lumen perW, life(greater ...
Fixing a shunt capacitor of … KVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.11 to 20 KVAR, Complete with all lea...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Doc-5450.doc
Tender Document • 5.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .