Provision of High level platform at PF -1 at Murliganj with all passenger amenities including Divyangjan Amenities as per norms.

A-Non-Schedule Items

B-CPWD-DSR-2023

Item Breakup - B-CPWD-DSR-2023

Jamuna sand, with common burnt clay non modular bricks. 11.9S TERRAZO FLOORING 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green 11.9 marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete : 24 11.9.4 White cement without any pigment Sqm 75 1067.5 80062.5 11.16S TILE FLOORING SAMASTIPUR DIVISION-ENGINEERING/EAST CENTRAL RLY Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to 11.20 match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 25 11.20.1 Light shade pigment using white cement Sqm 300 1402 420600 11.26S KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the 11.26 shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 26 11.26.1 25 mm thick Sqm 75 1948.25 146118.75 11.37S CERAMIC GLAZED TILES 11.39 Providing and laying rectified Glazed Ceramic Sqm 10 1330 13300 floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, 27 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid 11.41 on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 28 11.41.2 Size of Tile 600x600 mm Sqm 25 1553.45 38836.25 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 11.56 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Sqm 50 4481.3 224065 29 Cherry/Ruby Red or equivalent 12.0 ROOFING 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 30 12.41.2 110 mm diameter Metre 100 377.4 37740 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.1 Coupler SAMASTIPUR DIVISION-ENGINEERING/EAST CENTRAL RLY 31 12.42.1.2 110 mm Each 5 136.15 680.75 12.42.5 Bend 87.5 degree 32 12.42.5.2 110 mm bend Each 10 150.35 1503.5 12.50 Providing and fixing precoated galvanised iron Sqm 65 738.65 48012.25 profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard 33 film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness 12.51 of 0.05 mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : 34 12.51.1 Ridges plain (500 - 600mm) Metre 20 532.35 10647 35 12.51.6 Gutter (600 mm over all girth) Metre 20 1313.7 26274 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 36 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 125 333.35 41668.75 CEMENT PLASTER WITH A FLOATING COAT OF 13.7S NEAT CEMENT 12 mm cement plaster finished with a floating 13.7 coat of neat cement of mix : 37 13.7.2 1:4 (1 cement: 4 fine sand) Sqm 100 425.55 42555 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 10 2434.25 24342.5 38 equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 39 15.7.4 In cement mortar cum 5 2060.2 10301 Removing mortar from bricks and cleaning 15.8 bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): 15.8.3 1000 10 6700.8 67.01 40 From brick work in cement mortar Nos. SAMASTIPUR DIVISION-ENGINEERING/EAST CENTRAL RLY 15.19 Dismantling steel work manually/ by Kg 50 3.85 192.5 mechanical means in built up sections without 41 dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. 15.56 Dismantling old plaster or skirting raking out Sqm 50 54.65 2732.5 joints and cleaning the surface for plaster 42 including disposal of rubbish to the dumping ground within 50 metres lead. 16.0 ROAD WORK 16.49S MISCELLANEOUS 16.75 Providing and laying C.C. pavement of mix M-25 cum 312 9823.8 3065025.6 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum 43 dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). 16.76 Deduct for using of M-20 grade concrete cum 3 -203.8 -611.4 44 instead of M-25 grade concrete in C.C. pavement. Total 14744295.21