PROVN OF HARD STANDING PARKING FOR TRANSITED VEHS AT ASC BN (MT) AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for moorum/red bajri filling in floors or in foundation, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for hardcore of broken stone of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for reinforced cement concrete M-25 design mix (using 20mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

S&F Mild Steel TMT bars 8mm and over, cut to lenghth, bent to shape requird, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed by Engineer in Charge.

All as per item No 7.00 mentioned here-in-above 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finihed surfaces complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

M&L for cement concrete type (C-2) 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete and complete all as specified and directed.

S&F roof trusses (Minimum medium grade pipe) trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) and tubular trusses including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A incliding necessary welding, bolting, riveting complete all as specified and directed by Engr-in-charge.

S&F plates such as gusset plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality-A including necessary welding, bolting, riveting complete all as specified and directed by Engr-in-charge.

S&F pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating @ 150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Chajja, fixed with self tapping screws complete all as specified and directed.

M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soils complete all as specified and directed

M&L for 75mm thick Cement concrete type B- 1, 1:2:4 (using 20mm graded stone aggregate) as in floors, finished even and smooth without using extra cement complete all as specified and directed

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection etc. complete all as specified and directed.

M&L for fly ash brick straight or curved on plan.exc 6 mtr mean redious built in CM (1:6), including demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on walls in cement mortar (1:4), using water proofing compound complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces of wall finsihed even and smooth without using extra cement complete all as specified and directed

M&L for applying two coat of oil bound distemper on newly plastered surfaces of wall over a coat of wall alkali resistant primer complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/Bison Acrylic Distemper of Berger)

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

Supply only Liquid water proofing compound complete all as specified and directed (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm cement screed base of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed bed 10mm thick in cement mortar (1:4) and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for providing and laying at or near ground levelfactory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for machine pressed pre-polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for 110 mm dia PVC (SWR) pipes single socketed, in any lengthwith rubber ring joints, laid in trenches or in floors complete all as specified and directed

Returning, filling in and including spreading, leveling, watering & well ramming in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in oft/loose soil complete all as specified and directed.

M&L for cast- in- situ cement concrete in Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills,steps and other similar bands, plinth courses,string courses and railings upto 60cm in height ,copings,apex stones,kerbs and the like including weathering ,slightly rounded or chamfered angles and throating as desired complete all as specified and directed by the Engr-in-charge.

M&L for 500 mm thick Kankar or laterite,with mix of fly ash ,clinker & stone dust in the proportion of 1:3:6 ( i.e. 10% fly ash,30% clinker & 60% stone dust ) laying in layers n.exc 10cm thick ,watering ,ramming and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge .

Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne and n.exc 12 tonne complete all as specified and directed.

M&L for soling with 150 mm spread thickness (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and considered to required gradient and camber complete all as specified and directed by Engr-in-charge.

M&L for 7.5 cm thick (compacted thickness) WBM, with coarse aggregates (basalt type of aggregate) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required with preparing unsurfaced WBM by brushing with wire brushes for removing mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for PCC (1:4:8) 100 mm thick Type D2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings and finishing complete all as specified and directed.

M&L 150 mm thick PCC M-25 (design Mix) (using 20mm graded crushed stone aggregate) as in hardstanding laid in panels, finishing the surface even and finish the surface by brooming complete all as specified and directed. Note:(i) Material for PCC M-25 shall be carried out from RMC as approved by Engr-in-Charge (ii) Plate viberator to be used for compacting of floor (iii) Contractor shall furnished necessary test report of M-25 and purchase voucher of plant for this aspect before claiming of RAR. (iv) Quoted rates shall be deemed to be included for necessary T&P, Transportation and plasticizer and nothing extra paid to this aspect.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and directed.

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed.

Forming Construction joint 45 mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed.

S&F reinforced concrete pipes ,class NP2, 200 mm bore laid and jointed in trnches or in floors complete with collar complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate ) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

EM PORTIONS M&L for point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including suitable size PVC conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

All as per item No 47.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed

All as per item No 47.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for point wiring for one socket outlet on independent board controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated Unsheathed FRLSH cables in and including suitable size PVC conduit (ISI marked), including terminal switch boxes PVC (ISI Marked) and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable as earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and directed .( For Same Board only)

S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

S&F 80 watt LED High bay light fittings complete all as described here-in-below:- (i) Total system lumen not less than 8800 lumens. (ii) High pressure die cast aluminium. (iii) IP rating :- IP 66 (iv) Front cover : Toughened Clear glass. (v) Mounting :- Suitable for bracket arm (vi) Finish :- Epoxy powder coated with any additional treatment for smooth and anti corrisive finish. (vii) Lamp :- High bright LED with Lens. (viii) System efficacy (lm/W) of the luminaries :- Not less than 110 lm/watt. (ix) Colour temperature :- Not less than 5700K (x) Colour rendering Index (CRI) Not less than 74 (xi) Life : Not less than 50000 Hrs of opreation (xii) Optices :- Spread (Beam angle along the driveway)- 120degree, Through( Beam angle across the drive wat)- 60 degree, Beam pattern - Asymmetical driveway (xiii) Control gear:- Inbuilt electronic driver, PF not less than 0.90 and TDH less than 20% with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection :- Inbuilt surge protection minimum 5 KV (xv) Heat Sink :- As per OEMs design.

S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

S&F wiring for circuit/submain wiring alongwith earth wire with the 2x4.0 sq. mm +1x4.0 sq. mm earth wire sizes of FRLSH is PVC insulated copper conductor, single core cable in surface/recessed as required including suitable size PVC conduit pipe (ISI marked) complete all as specified and directed.

S&F MCB SPN DB 8 way double door with 200 Amps rated bus bar, 240 volts IP-43 protection,isolated neutral bar,insulated busbar assembly,mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost)

S&F BLDC ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete as specified and directed

Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete as specified and directed.

KAZI SAHABUL ALAM

Jaibalaji Enterprise

M/S Ali Trading Co

S. D. Construction Co.

FRIENDS CONSTRUCTION

M/S S M ENTERPRISE

UNITED BUILDERS

rahul enterprise