Loading…
Loading…
Tender Value
₹8.1 L
EMD Value
₹16,500
Closing Date
5 Oct 2026, 10:00 am
EXECUTIVE ENGINEER DAULATPUR CHOWK DIVISION
EXECUTIVE ENGINEER DAULATPUR CHOWK DIVISION
Repair Restoration of Rain Damages on link road to Shaheed Gurdev Singh to Village Deoli Km 000 to 3070 SH Providing and laying Bituminous Concrete laid with paver finisher in Various RDs Under PDNA 2023
2026_PWD_144351_1
REPAIR AND RESTORATION OF RAIN DAMAGES ON LINK ROAD TO SHAHEED GURDEV SINGH
Open Tender
Civil Works
Percentage
90 days
DAULATPUR CHOWK
Please refer Tender documents.
3 documents required · 3 mandatory
₹350
₹16,500
25 Sept 2026
25 Sept 2026
5 Oct 2026
25 Sept 2026
5 Oct 2026
25 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)specification including premixing the material with water at OMC in for all leads and lifts, laying in uniform layers with mechanical paverfinisher in sub-base / base course on well prepared surface and compacting with vibratory roller of 8 (eight) to 10 (ten) tonne capacity to achievethe desired density, complete as per CPWD specifications 2019 complete and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes, duties /royalities, cess, Toll taxes of local bodies or other taxes imposed by the Government. | 7.11 | Per cubic metre | 1,350 | ₹9,598.5 |
| 2 | Providing and applying tack coat with RS-1 setting bitumen emulsion on bituminous surface on WBM/WMM @ 0.40kg/sqm (at the rate of zero point four zero kilogram per squre metre) using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom as per CPWD specification 2019 and as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes, duties /royalities, cess, Toll taxes of local bodies or other taxes imposed by the Government. | 94.8 | Per square metre | 40 | ₹3,792 |
| 3 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. and as per the directions of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes, duties /royalities, cess, Toll taxes of local bodies or other taxes imposed by the Government. | 2,370 | Per square metre | 25 | ₹59,250 |
| 4 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading 25mm (Twenty Five millimetre) compacted thick with bituminous binder VG-30 (Viscosity Grade-thirty) @ (at the rate of) 5.50% (five decimal five zero percent of total mix weight) and lime filler 2% (percentage by weight of Aggregate), with minimum 100-120 TPH capacity (hundred- one hundred twenty tonne per hour) hot mix batch type/drum type plant with electronic control, transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per CPWD specification 2019, complete and as per directions of Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals. The rates excluding of Goods Services Tax but including Labour cess, other levies/taxes, duties /royalities, cess, Toll taxes of local bodies or other taxes imposed by the Government. | 59.25 | Per cubic metre | 12,500 | ₹7,40,625 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.95 MB
Tendernotice_2.pdf
PDF • 0.23 MB
SBD3.pdf
Tender Documents • 3.15 MB
BOQ_214666.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .