Rejuvenation of water body Pond near police line channi Himmat ward NO 51

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, ncluding getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundation footing etc.

Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Chequerred terrazzo tiles 22mm thick with graded marble chips of size upto 6mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, polishing and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement

62mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s mspecifications, including cost of cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Renovating lawns including weeding, cheeling the grass, forking theground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grassforms a thick lawn free from weeds & fit for mowing & disposal ofrubbish as directed, including supplying good earth if needed butexcluding the cost of sludge or manure (the good earth shall be paid separately.)

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water,uprooting fresh growths after 10 to 15 days and then fine dressing forplanting new grass, including disposal of all rubbish with all leads & lifts

Excavation in dumped stones or malba including stacking ofserviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed

Weed clearance From lakes(using boats)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete..1 Hot finished welded type tubes

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hard drawn steel wire fabric

Supply, Installation, Testing & Commissioning of Surface aerator of capacity 50 cum/hrs complete with its assemblies. Motor (TEFC 7.5 Hp Insulation IP-55 with class finsulation Motor R.P.M. Approx. 1440 MOC of Float Approx. 1440 Aerators blades 3 Nos. Oxygenation 1.5 kgs oxygen/net kwh Motor 3 phase,440-450volts A.C., 50 Hertz ,7.5 HP Body C.I Make ABB, Kirloskar, Crompton RPM Approx. 1440 MOC of Impeller & shaft SS 304 MOC of Motor quide flanges MSEP

Pond rejuvenation using Bioremediation technology available in powder form of special waste treating microbes, fungi and /or plants and their products (such as enzymes) in 1.58 Kg quantity per day for 90 Days to achieve BOD less than 5 mg/l. Bio enzymatic solution powder of aerobic and anaerobic bacteria with bacteria count of each not less than 8000000000 cfu/mgl (Brands EnSafe, EcoSan G, DIGESTOR), The necessary labour shall be deployedb to complete all operations such as spraying and dosing, removal of biosludge generated during treatment, dredging, removal of floating plants and other material like trash, empty bottles, dead leaves / tree branches, polythene bags etc. from the lake/water body. Note: -Rate shall be inclusive of cost of dosing material, one lab test per month, T & P for dosing/spraying, cleaning of the lake, safety arrangements, storage water tanks if required and adequate manpower required to carry out all the activities.

Bio remediation process more 30 days dosing of 0.5 kg per day enzymes

3 seater stainless steel benches with arms Confirming to grade 202, similar to HC IS, having nickel contents less than 1% perforated in regular shape 1cm x 1cm having perforation 49 X 49(seat and back], Hand rest on all three seats. Overall length of bench 60” X 64.5”(hand to hand) height, bottom to seat level 18” overall height 36” X 37.5” Weight 38.5-39.5 kgs Approx, plate width 16" seat

Supply & Installation of Solar street light (Including civil work as per attached drawing) – having MS powder coated body encases Solar PV panel polycrystalline, comprising of Lithium battery with in-built BMS, high brightness LED light, driver efficiency more than 90%, High efficiency charge controller with automatic dimming functionality (with 12m PIR motion sensor) compliant to IP- 65 automatic Dusk to Dawn operation, working temperature 0 C to 55C, with battery overcharging and battery deep discharging protection. Indications should include GREEN LED for battery charging and RED LED for battery low (one blink every 2 second) and Solar panel dirty indication (two blinks every 2 second). Light should be properly packed in Litlon (1 inch thick or better) to avoid any damage during transit 12Watt LED Material: Aluminium Alloy Solar Panel: Monocrystalline, Max Power 18V/35W LED Power: Bridgelux 12W Battery : Li ion 14Ah Lumens : 1360 - 1560 , View angle- 120⁰ Install Height : 4 - 6m Charge time : 6 - 8 hours Discharge time : 8 - 12 hours Backup : 2 - 3 days

Compressive operation & maintenance of

Ist Year

IIndyear

IIIrd year

HIRA LAL

M/S AMAN KUMAR CONTRACTOR

DEEPAK BANOTRA GOVT CONTRACTOR