Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-Finance NOT AVAILABLE | L1 | Accepted-Finance Being lowest bidder | |
| 2 | L2₹2.3 L+₹5,929 (2.63%)Rejected-Finance BHAGWATI NAGAR JAMMU | L2 | Rejected-Finance Not being lowest bidder | |
| 3 | L3₹2.3 L+₹9,310 (4.13%)Rejected-Finance BHAGWATI NAGAR JAMMU | L3 | Rejected-Finance Not being lowest bidder |
Tender Value
₹2.4 L
EMD Value
₹4,770
Closing Date
25 Nov 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer MID Jammu
Replacement of the damaged components of the 150KVA voltage stabilizer of LIS Manyal Brahmna along with other allied works and Repair replacement of worn out parts of 5 cusec x 10m head pumping unit no.2 along with allied works at LIS Kukerian.
2022_IFC_195712_1
MID/J/e-NIT/2022-23/82
Open Tender
Repair and Maintenance Works
Item Wise
10 days
Manyal Brahmana Kukerian
As per tender notice
7 documents required · 7 mandatory
₹200
Executive Engineer MID Jammu
₹4,770
Yes
13 Dec 2022
12 Nov 2022
26 Nov 2022
12 Nov 2022
25 Nov 2022
19 Nov 2022
12 Nov 2022 - 25 Nov 2022
Replacement of the damaged components of the 150KVA voltage stabilizer of LIS Manyal Brahmna along with other allied works.
Replacement of the damaged components of the 150KVA voltage stabilizer of LIS Voltage stabilizer at LIS Manyal Brahmna. Job includes disconnecting all the electrical connections of the stabilizer both on LT transformer side and LT distribution panel side by way of removing old rusted thimbles along with nuts and bolts. Shifting of the voltage stabilizer to the nearest roadside by manual head load and loading of the same in the transport vehicle for further carriage to the workshop by employing hydraulic crane and manual labour at site. Replacement of the wornout components of the voltage stabilizer at workshop by way of removing its top cover for extraction of inner assembly from the casing sump and extracting out the damaged coils. Providing and fitting of 2no.s new copper coils of requisite size and specifications, new insulation material and nuts/bolts, varnishing, drying in hot air circulation. Lowering of the coils inside the casing. Also replacements to the damaged components of rotor switch assemblies by providing/fitting of new set of brass bush rods for all individual phases on LT side. The job involves providing/fitting of 01no. voltmeter. Also providing/filling of 150 litres of fresh transformer oil. Providing and fitting of new top cover gasket and cover plate, nuts/bolts and complete reassembling of the stabilizer at workshop. Shifting back the voltage stabilizer to the site. Unloading the same at site employing hydraulic crane/manual labour and shifting by manual head load into the pump room for re-installation. Reinstallation of the voltage stabilizer in the pump room by fixing all the electrical connections, providing/fitting of new nuts/bolts. Testing of the 150 KVA voltage stabilizer on partial load and then on full load at site. Complete job including cost of materials, cost of rebate on account of old copper scrap, skilled/semi skilled labour charges and tools and tackles required during the execution of the job.
Rebate on Old Parts
Repair/replacement of worn out parts of 5 cusec x 10m head pumping unit no.2 along with allied works at LIS Kukerian.
Decoupling of 5 cusec x 10m head HC pump of unit no.2 at LIS Kukerian from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 cusec HC pump set to the nearest roadside, using manual labour and head load, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to 5 Cusec HC pump set at workshop by way of dismantling and extraction of damaged internal parts. Job includes repair to the pump shaft by way of remetalling turning, aligning, threading and making of new keyways and its proper adjustment. Repair to the impeller by way of welding/brazing, machining, making key ways slots on the impeller and fitting of the same on the pump shaft. Providing and fitting of bushes, new neck rings, gland plate, new bearings as per sample, new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, complete reassembling of pump set after carrying out necessary repairs. Shifting back to the LIS Kukerian and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Providing and fitting of new Coupling set along with new nuts, bolts and rubber bushes. Complete job includes cost of material and labour charges. Dismantling of the damaged & burnt 40HP electric motor of pumping unit no-4 of LIS Kukerian from base frame and pump after disconnecting all electrical connections on input as well as output side. Carriage and shifting of the motor by using manual head load to nearest road & loading in the vehicle for further transportation to workshop for repairs/rewinding at Jammu. Dismantling of the damaged 40HP Motor at workshop for extraction of burnt/damaged windings, cleaning of stator slots and complete rewinding of the motor with new copper wires of requisite gauge and specifications of standard make. Providing/fitting of new insulation, packing material, then varnishing with superior quality varnish & drying in oven in controlled temperature. Complete job includes cost of material and labour charges. Repair to rotor of motor by providing/fitting of new bearings (DE & NDE) after rebuilding of the rotor shaft and finishing to bearing size, making new keyway for coupling, providing/fitting of bearing end cover plates and complete greasing of the bearings. Back carriage to site after repairs and reinstallation of motor commissioning and testing on idle and load conditions. Complete job includes cost of material including rebate on old copper scrap and labour charges with hiring charges of tools tackles and transport charges involved.
Rebate on Old Parts
M/S FASTTRACK ENGINEERS
BEE AAR ENTERPRISES
BEE AAR ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .