REPAIR/MAINT OF STEEL /WOODEN FURNITURE INCLUDING PAINTING /POLISHING AT AF STN MEMAURA

Amount

REPAIR/MAINT OF WOODEN FURNITURE

Taking out old U/S top from table dining 6 persons and supply new top of 18/19mm thick veneered MDF board Exterior grade(make-Century/greenply/Archid) as approved by EIC, and fixing the same by high class formation cabinet maker including PVC edging of 1.5 mm duly pressed with edge bending machine on the edges of top all as specified and shown on drg with suitable size of steel screw to table dining 6 persons and all as directed by Engr-In-Charge. ( FD-239)

All as per item No 1.01 here in before but from Teapoy (FD-232) and all as directed by Engr-In-Charge.

All as per item No 1.01 here in before but from Peg table (FD-227) and all as directed by Engr-In-Charge.

All as per item No 1.01 here in before but from Table centre/Table Varandah ( FD-235) and all as directed by Engr-In-Charge.

All as per item No 1.01 here in before but from Table writing FD, Table 3' x 2' ( FD-33 FD-41 FD-42) and all as directed by Engr-In-Charge.

All as per item No 1.01 here in before but table 3' x 3' and all as directed by Engr-In-Charge.

Taking out old U/S legs from table dining FD/Table dining 6 persons and supply and fixing new legs of Ist class hard shisham wood all as shown on drg and as directed by Engineer-in-Charge. (FD-64)

All as per item No 7 before but for Teapoy ( FD-232) and all as directed by Engr-In-Charge.

All as per item No 7 before but for Peg Table (FD-232) and all as directed by Engr-In-Charge.

All as per item No 7 before but for Centre Table (FD-235) and all as directed by Engr-In-Charge.

All as per item No 7 before but for Table writing FD and Table 3' x 2' (FD-223) and all as directed by Engr-In-Charge.

All as per item No. 07 above but table 3' x 3' and all as directed by Engr-In-Charge.

Taking out old U/S long rail from table dining\Table dining 6 persons and S&F new long rail of Ist class (shisham wood) complete all as shown on drgs and directed by Engr-in-charge. (FD-239)

All as per item No 13 before but Teapoy (FD-232) complete all as shown on drgs and directed by Engr-in-charge

All as per item No 13 before but Peg table (FD-230) complete all as shown on drgs and directed by Engr-in-charge

All as per item No 13 before but Table writing, Table 3'x2' (FD-33 FD-41 FD-42) complete all as shown on drgs and directed by Engr-in-charge

All as per item No 13 before but Centre table (FD-253) complete all as shown on drgs and directed by Engr-in-charge

Taking out old U/S short rail from Table dining 6 persons and S&F new short rail of Ist class hard (Shisham wood) complete all as shown on drgs and directed by Engr-in-charge. (FD-239)

All as per item No 18 before but Teapoy (FD-232) complete all as shown on drgs and directed by Engr-in-charge

All as per item No 18 before but Peg Table (FD-231) complete all as shown on drgs and directed by Engr-in-charge

All as per item No 18 before but Centre Table (FD-274) complete all as shown on drgs and directed by Engr-in-charge

All as per item No 18 before but Table writing FD, Table 3'x2' (FD-33, 41, 42) complete all as shown on drgs and directed by Engr-in-charge

Taking out old drawers from Table writing FD/Table 3' x2' and S&F new one of same size, front made of 18 mm MDF board Exterior grade(make-Century/greenply/Archid), sides, back and bottom of 6mm thick plywood MR Grade with smooth functioning all as specified and shown on respective drgs or as directed by Engr-in-charge. (FD-232 FD-41 FD-249)

Dismantling the following old U/S damaged part\components from Table writing and S&F new one with of same length, size made of 18 mm thick MDF board Exterior grade(Make Century/ greenply/ Archid) and 8mm thick plywood MR Grade with smooth functioning including two coats of polishing with Touch wood brand polish all as specified and shown on drgs and as directed by Engr-in-charge :- (FD-249 FD-248 FD-33)

Door leaf of side rack of table writing

Side portion of side rack of Table writing

Back portion of side rack of table writing

Bottom portion of side rack of table writing

Knob 25mm

Taking out all old damaged and U/S materials worn out from Chair dining CB W/O Arms, including cleaning the dust wax, grease etc from the frames and providing two coats of polishing with touch wood brand polish before canning the items on all portion of Chairs, re-caning the items with approved quality white colour half round from centre with 2.5mm wide cane & 0.3mm thick but border with 3 to 3.2mm wide and 0.4mm thick cane in Godrej pattern weaving all as shown on drg and as directed by Engr-in-Charge. (FD-203 FD-279 FD-70M FD-225)

All as per item No 30 here in before but Chair Writing (FD-250) as shown on drg and as directed by Engr-in-Charge

All as per item No 30 here in before but Chair easy (FD-299/17) as shown on drg and as directed by Engr-in-Charge

Taking out all old U/S materials from seat of chair dining PVC Map and S&F new PVC seat of AMCO including polishing two coat of Touch wood brand polish all around the frame of chair all as specified and shown on drawing and as directed by Engr-in-charge. (FD/MAP-II/05)

Dismantling the following old U/S damaged component/parts from repairable frame of chair dining CB, chair CB w/o arms, chair dining PVC Map and S&F new one with ist class Teak wood as per old one and reassembling the chair in proper manner including two coats of polishing with touch wood brand polish all as specified and shown on drgs and as directed by Engineer-in-Charge. (FD-225 FD-285 , FD/MAP-II/05)

Front legs

Rear legs

Front rail

Side stiffener

Rear rail

Side rail

All as per item No 34 here in before but from chair writing and chair office writing all as specified and shown on drgs and as directed by Engineer-in-Charge. :- (FD-250 FD-20)

Front legs

Rear legs

Front rail

Rear rail

Side rail

Side stiffener

All as per item No 34 here in before but from chair easy all as specified and shown on drgs and as directed by Engineer-in-Charge. (FD-299/17)

Front legs

Rear legs

Front rail (seat)

Rear rail

Side rail

Top and bottom rail of back

Side rail of top

Dismantling the following old U/S damaged component/parts from repairable of chair wooden Bottom and S&F new one with Ist class hard wood (Shisham wood) as per old one and reassembling the chair in proper manner including two coats of polishing with touch wood brand polish and all as specified and shown on drawing and as directed by Engr-In-Charge. (FD-279)

Front legs

Rear legs

Front rail

Rear rail

Side rail

All as per item No 58 here in before but from side board as specified and shown on drawing and as directed by Engr-In-Charge :- (FD-241)

Top of side board of MDF board Exterior grade(make-Century/greenply/Archid)

Planks of rear side

Side planks

Drawers with knob 25mm dia of mild steel bright finished.

Shelf

Legs of size 45mm x 45mm

Dismantling and re-assembling the following damaged/unserviceable part/component of Table bed side by removing/replacement the component/part and S&F new with block board commercial veneered on both side and ply wood 6mm thick back portion of table bed side including two coats of french polish with touch wood brand polish, complete all as specified and directed :-

Side portion of bed side table

Back portion of bed side table

Shelves

Taking out old U/S damaged/broken looking mirror of table dressing ladies and S&F new looking mirror of same size and 5 mm thickness Make Saint Gobain/Modi Guard and change of bottom base of mirror and repairs of drawers as directed by Engineer-in-Charge. including two coats of french polish with touch wood brand polish, rest all as specified and shown on drgs. (FD-261)

Taking out old U/S plywood from bed ply top and supply and fixing new ply wood BWP grade 12mm thick IS 710, 7 No of ply of required size and fixed to bed frame by using screw wood steel 25mm apart as directed Make : Archid ply/ Greenply/Centuryply (FD-245 FD-246)

Taking out old U/S long rail of bed plywood top and providing of new long rail of Ist class hard wood (Shisham wood) same shape and size all as specified and shown on drgs. (FD-245 FD-246)

Taking out old U/S short rail of bed plywood top and providing of new long rail of Ist class hard wood (Shisham wood) same shape and size all as specified and shown on drgs. (FD-245 FD-246)

Taking out old U/S legs of bed plywood top and providing of new legs of Ist class hard wood (shisham wood) same shape and size all as specified and shown on drgs. (FD-245 FD-246)

Taking out old U/S bottom rails of bed plywood top and providing of new one bottom rail of Ist class hard wood (shisham wood) required size and shape all as specified and shown on drawings and as directed by Engineer-in-Charge. (FD-245 FD-246)

Taking out old U/S head wing of bed plywood top and providing of new head wing of same materials shape and size all as specified and shown on drgs and as directed by Engineer-in-Charge. (FD-245 FD-246)

All as per item No 80 here in before but foot wing all as specified and shown on drgs and as directed by Engineer-in-Charge. (FD-18)

Sofa set 4/5 seater

Legs as per drg

Arms as per drg

Front rails as per drg

Bearer/Batten as drg

Back frame top/sides as per drg

Cushion complete as per shape and size ref in drg with 40 density PU foam (make-Godrej/Sleepwell) with upholstery of cloth of range not less than Rs. 350/mtr (make-as per sample),colour and shade & quality approved by Engr-In-Charge/ AGE(I)

Chair Dining Offr Map with Cushion (FD/E6/MAP/10(R) / FD/E6/MAP/04)

Changing complete seat with 75 mm thick PU foam 40 D (Godrej/Sleepwell ) on 12 mm plywood MR Grade with best quality rexine / cloth (range not less than Rs.350/RM),( Make as per sample) rest all as per drg

Front Legs as per drg

Rear legs as per drg

Stiffener as per drg

Back rest stiffeners as drg

Table Bedside MAP (FD/E6/MAP/15(R)

Replacement of handles of drawer as per sample held with office

Replacement of sides with 18 mm thick MDF Board exterior grade

Replacement of tops with 18 mm thick MDF board exterior grade

Replacement of drawers (upper) with 9 mm thick MR Grade ply in the sides and back and 12 mm MDF Board of exterior grade at front with Std quality telescopic channel (Make : Ebco/Hettich) as per drg and as directed by Engr-In-Charge

Replacement of drawers (lower) with 9 mm thick MR Grade ply in the sides and back and 12 mm MDF Board of exterior grade at front with Std quality telescopic channel (Make : Ebco/Hettich) as per drg and as directed by Engr-In-Charge

PVC rubber shoes

Replacement of back with 9 mm ply of MR Grade

Table Dining 4 Persons MAP (FD/MAP-II/03)

18 mm thick MDF Board of exterior grade (make-Century/greenply/Archid) shall be provided on top of table complete rest all as per drg.

Triangular wooden bracket 100X100X20mm thick

Top long rail as per drg

Top short rail as per drg

Legs with shoe as per drg

M&L preparing of under mentioned wooden furniture surface by complete removal of polishing by scrapping down with grinding machine before applying new coat of melamine polish,of required shade and as directed by Engr-in-Charge for certain furniture as under

Peg table

Teapoy wooden

Center table

Table writing

Table 3'x2'

Book case FD

Bed ply top

Table Dining 6 pers

Sofa set 05 seater

Dressing table gents FD and MAP

Dressing table ladies FD and MAP

Hat Stand

Table bed side

REPAIR/MAINT OF STEEL FURNITURE

Taking out all old U/S material (Nylon Newar/Plywood) from Charpoy GI pipe and cleaning of dust, wax, grease and replacing the damaged legs/short rails and elbow etc and making good the frame duly tightening all the loose joints of legs/long/short rails and make good the frame in original shape complete all as directed.(FD-220)

Supply only GI Elbow 32mm dia 3 way heavy duty ISI marked complete all as directed. (FD-220)

Supply only check nut 32mm dia heavy duty ISI marked complete all as directed.(FD-220)

Supply only long rail of GI pipe 32mm dia medium grade complete all as directed. (FD-220)

Labour for cutting the long rail in short rail legs size threading and fixing the frame of charpoy GI pipe complete all as specified and directed. (FD-220)

Supply and fixing 12mm thick ply wood commercial BWP IS 710, 07 ply plywood (Make-Century ply/greenply/archidply) and fixing same with two Nos of flat iron strip of size 900mm x 32mm x 5mm, bolts, nuts and washers, bolts of size 5x65 mm- 10 Nos round head bolts after drilling the three hole of each long rail and drilling the two hole on each short rail including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing including two coat of synthetic enamel paint over a coat of redoxide on the the iron strip complete all as per specified and as directed by Engr-In-Charge. (FD-220)

Taking out old U/S material from all type of steel table and supply of new top of 18/19mm thick veneered MDF board exterior grade (Make-Century/Greenply/Action tesa) as approved by Engr-in-Charge and fixing the same by high class furniture cabinet maker including PVC edging of 1.5 mm duly pressed with edge bending machine on the edges of top all as directed by Engr-In-Charge (FD-84)

Taking out all old damaged and U/S lever lock from door of Almirah steel large and medium and providing 5 to 7mm brass lever lock with duplicate key make Godrej/ Harrison duly tightened with machine screw steel with nuts including welding if required all as directed and specified and shown on drg. (FD-243 & FD-67)

Taking out all U/S damaged clamps from shelves of Almirah/lockers/cup board boards and S&F new clamps as per old one as required for adjusting the shelves as directed by Engr-in-Charge including two coats of synthetic enamel paint complete all as specified. (FD-243 & FD-68)

Taking out old U/S damaged handle from Almirah steel large and medium and S&F new one of same length and size and shape chromium plated cast iron handle of Godrej pattern and shall be fitted by using nut and bolts complete all as directed by Engr-in-Charge.(FD-243 & FD-67)

Taking out old U/S damaged lever lock from drawers and shutter of all type steel table and providing 5 to 7mm brass lock with duplicate key Make Godrej /Harrison and shall be fitted with machine screw complete all as specified and directed.(FD-84)

Repair of drawers of Table steel Clk/Officer by making smooth functioning and painting with OG paint to match with existing surface complete all as directed by Engr-in-Charge. (FD-84 and FD-84M)

Gas welding with brass rods including preparation of surface by derusting, scrapping and cleaning as required for welding to damaged parts/components of steel surface of furniture article where required to get it serviceable with smooth functioning all as directed by Engr-in-Charge.

Taking out all old U/S materials from seat and back of chair steel verandah cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and recanning with 4 to 5mm wide and 4mm plastic cane in tighten side and 32 to 34 bends on around the frame end recanning with 4 to 5mm weaving side rest all as specified and shown on drg and all as directed by Engr-in-Charge.(FD-256)

Supply and fixing of hand rest of 1st class hard shisham wood duly white painted for chair tube steel varandah all as directed. (FD-75M)

Supply & fixing of new rubber shoe/ cap plastic for steel verandah chair.

M&L cleaning, dusting, cobs, grease, wax etc from almirah steel medium with shelves derusted the rusted portion/parts up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge. (FD-67)

All as per item No 140 here in before but almirah steel large with shelves. (FD-243)

M&L cleaning, dusting etc from chair tube steel with arms derusted the rusted portion/parts of up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge.

All as per item no. 142 here in before but for chair tube steel w/o arms

Taking out unserviceable damaged seat frame from chair tube steel CB with arms and replace the same with new with 1st class hard wood shisham well finish painted with two coats synthetic enamel paint over a coat of pink primer duly caned in Godrej pattern with white colour cane 2.5 mm wide and 0.3 thick & border with 3 to 3.2 mm wide & 0.4mm thick cane half round all as directed by Engineer-in-charge

All as per item no. 144 here in before but for back frame

All as per item no. 144 here in before but for seat frame to chair tube steel w/o arms

All as per item no. 144 here in before but for back frame to chair tube steel w/o arms

Dismantling and re-assembling with new components of the following unserviceable parts/components of chair revolving steel all as specified by Engr-In-Charge

Supply & fixed new seat made of 12mm thick hot pressed plywood with fabric polypropylene /acrylic (range of fabrics not less than Rs 300/RM)and moulded polyurethane foam 50mm thick and 50 Density with PVC lipping all round complete all as shown on drawing.

All as per item hereinabove but u/s back complete all as directed.

Supply & fixing new arm rest made of polyurethane as per drg

Complete pedestal assy as per complete all as per drg and directed.

Supplying and fixing new twin wheel castors of required dia complete all as directed.

Supply & fix new chrome free cylinder tube shall be fixed complete all as per drg and directed.Make Godrej

Taking out old/unserviceable shifting locking lever assembly and Supply & fix new as shown in drawing complete all as directed.

Dismantling and re-assembling with new components of the following unserviceable parts/components of chair writing steel all as specified by Engr-In-Charge

Taking out old/unserviceable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric( range not less than 300/RM) and moulded polyurethane foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing.

All as per item hereinabove but unserviceable back complete all as directed.

Taking out old broken/unserviceable arm rest of chair writing steel & supply & fixing new PU arm rest as per drg

Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair writing steel.

Taking out unserviceable/broken frame and S&F new frame as per drg duly painted as per drg and as directed by Engr-In-Charge

Taking out unserviceable/broken Hand board from the handle of Chair Writing with Handboard and supply and fix new Hand Board made of 18mm thick prelaminated MDF Board of same size as per drg and as directed by Engr-In-Charge

Teapoy Varandah (FD-383/255)

Rubber shoe std quality as per drg

18mm thick pre laminated MDF Board exterior grade (Make-Century/Greenply/Action tesa) shall be provided on top of teapoy verandah complete.Rest all as per drg

10 mm thick MS bar welded to each leg and one centre stiffener provided including welding works wherever required complete as directed by Engr-In-Charge

Taking out all old U/S PVC seat and back of chair steel verandah MAP cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and S&F PVC seat and Back (Make-AMKO/COMFO/Classic/HARMONY) rest all as specified and shown on drg and all as directed by Engr-in-Charge. (FD-359/MAP/11/MAP-II/15)

Bed Hard Officer (FD/E6/MAP/08R)

Supply and fix 12 mm thick plywood top BWP grade IS 710, 07 ply (make-Centuryply/ Greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/bolts, appropriate hole shall be made with electric drill machine complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

Replace head rest/Foot rest with Pre Laminated exterior grade MDF Board 12mm thick complete as per drg.

Charpoy IP Hardtop MAP

Supply and fix 12 mm thick plywood top BWP grade IS 710, 07 ply (make-Centuryply/ Greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/bolts, appropriate hole shall be made with electric drill machine complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

Rack steel Adj 3/6 tier (FD-106)

Welding wherever required as directed by Engr-In-Charge

Repairs to shelves include tinkering/denting, welding, etc. all as shown, as specified & as directed

Shivam Enterprises (BID ID -3392311)