PROVN OF SOLID WASTE MANAGEMENT PLANT IN VARIOUS

concealed point wiring comp with 1.5 sq mm FRLSH

PVC 1 multi standard copper conductor 1 core cable 1100 V gd for One 15 A socket outlet but using 2.5 sqmm FRLS copper conductor

S and F single pole and neutral DB wall mounting type

240 Volts

8 Way with 100 Amps rated bus bar

double door suitable for fixing MCBs including connecting etc

S and f wall mounted fan 450 mm turbo metal body with all accessories all as specified and as directed

Supply and fix in replacement vertical TPN DB 4 way in double door 415 volt all as specified and as directed. Make-Legrand Cat No 507745

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground

Automatic organic waste machine

Per day waste processing capacity 250 Kg Features Per day waste processing capacity of Composting system- 250 Kg per Day

Installation testing and commissioning of Automatic organic waste machine cap 250kg

Automatic organic waste machine

Per day waste processing capacity 500 Kg Features Per day waste processing capacity of Composting system- 500 Kg per Day

Installation testing and commissioning of Automatic organic waste machine cap 500kg

Automatic organic waste machine

Per day waste processing capacity 1000 Kg Features Per day waste processing capacity of Composting system-1000 Kg per Day

Installation testing and commissioning of Automatic organic waste machine cap 1000kg per day

kill waste unit of capacity 80kg per hr Material Non-Corrosive mild carbon steel of IS2062-GRADE B category Cylindrical Chamber as specified by BIS

manufactured by Jindal Steel Thickness 5mm

Installation

testing and commissioning of kill waste unit of capacity 80kg per hr

Bailer of 5HP Specification for Balling Press Machine Capacity- 20Ton Weight of bale-50-60 kg Bale size LXWXB-700mm X 500mm X 650mm

Installation

testing and commissioning of Bailer 5HP

machine capacity 20 Ton

Excavation in trenches in soft by loose soil n exceeding 1.5 m depth and In exc 1.5 m width for foundation etc or for shafts cesspit mainhole pier holes etc

Excavation in trenches in hard by dense soil not exceeding 1.5 mir wide and not exc 1.5 m depth for laying of Gl pipes and getting out all as specified and directed.

M and L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness

M and L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line

level

M and L for plain cement concrete 1-2-4 type B-0 using 20 mm graded stone aggregate as in sub base of floor complete all as specified and as directed

Removing of excavated earth to a distance beyond 50m and upto total distance 250m

Removal of surplus excavated solid to a distance exc 50m and n exc. 250m and deposting where directed at a level n.exc. 1.5m above the starting point complete

S and F Gl water tubing

medium grade

20 mm dia

incl fittings by accessories like sockets

bend

elbow

union exc laying in trenches including taking out old us pipe all as specified and directed

S and F Gl water tubing

medium grade

25 mm dia

incl fittings by accessories like sockets

bend

elbow

union etc laying in trenches including taking out old us pipe all as specified

S and F Gl water tubing

medium grade

50 mm dia

incl fittings by accessories like sockets

bend

elbow

union etc laying in trenches including taking out old us pipe all as specified and directed.

M and L for gunmetal globe by gate valve with iron wheel head

screwed both Bid Details 3/79 ends of sizes 50 mm ISI marked all as specified and directed

Construction of brick masonary valve chamber with 3.00 mm thick MS sheet cover and angle iron frame of size 40 x40x6 mm

Supply and fix stop Valves 25mm dia cast copper alloy scrawed down high pressure

. with crutch or butterf y handle

screwed both ends for iron pipe or for unions and fixed

Supply and fix slop Valves 20mm dia cast copper alloy scrawed down high pressure

with crutch or butterfly handle

screwed both ends for iron pipe or for unions and fixed

S and f rubber hose pipe with steel reinforced of dia 25mm for high pressure application all as specified and as directed

S and F rotational moulded polyethylene water storage tanks cylinderical vertical with closed tops hoisted and fixed in position of capacity 500 litres all as specified and as directed

S and F pressure pump 0.75kw by 1 hp motor 220 volt

suction by delivary 50 by 50 mm head 10.8-1.5 m

discharge 3-18 cubic meter by hr with foundation all as specified and as directed

Cutting of existing 100mm dia C.l pipe line

inserting Tee for taking branch connection of 50mm dia including fittings.

M and L 100 mm thick cement concrete type D2

1-4-8

40mm graded aggregate as in sub base of floors complete all as specified

and directed.

M and L for 100 mm thick cement concrete 1-4-8 type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed

Supply and lay sub class B bricks laid dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and as directed

M and L Sand filling under floors or in foundations including watering and consolidation

complete all as specified and directed

M and L for sand cushinong with clean dry sand in trenches for cable protection complete all as specified and directed Note Punned depth only shall be measured and paid.

Supply and fix galvanised iron pipe in 80 mm bore

light grade for protection of UG cable laid in trenchestrenches by wall by roof by pole by through pipe etc complete all as directed

Supply and fix galvanised iron pipe in 50 mm bore

light grade for protection of UG cable laid in trenchestrenches by wall by roof by pole by through pipe etc complete all as directed

Cutting hard standing by road for laying of cable by protection pipe not exceeding 30cm wide and not exceeding 30cm deep

Boring of road for insertion of cable in cable protection GI pipe of sizes 50mm to 80mm

1m deep below the normal ground surface for road crossing without damaging the road

Supply

Install

testing and commissioning factory made outdoor type dust and vermin proof LT panel boad cubical double door hinged type comparmentised of suitable size 415 volts

AC 50Hz

Materials and labour for earthing complete with galvanized earth plate electrode 600 x600 x 6.0 mm thick

buried directly in ground earth pit not less than 2.25 m

M and L PCC 1-3-6 type C-2

40 mm graded aggregate in foudations

filling and mass concrete

M and L Brickwork with flyash bricks old size built in CM 1-4 straight or curved on plan exceeding 6 metre mean radius

Rendering 15 mm thick in cement and sand mortar 1-4 on fair faces of brick work or concrete surface of wall

surface finished even and smooth without using extra cement

M and L for Hardcore of broken stone or boulders of gauge In exc. 63 mm

deposited

spread and levelled in layers n exc. 150 mm thick

watered and rammed to a true surface complete

M and L for providing cement concrete 1-2-4 type B1 using 20mm graded aggregate as in copping including Bid Details 4/79 weathering

slightly rounded or chamfered angles and necessary formwork complete

S and F 110 bore PVC SWR pipes single socketed in any length laid in position on wall as weep holes

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete

using extra cement including forms moulds mitred by stopped ends etc

Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete

using extra cement

including forms

moulds

mitred by stopped ends etc

Material and labour for precast RCC 1-2-4 type B1 cover slab using 20mm graded stone aggregate set in cement mortar 1-4 as in manhole cover by drain cover including

M and L PCC 1-2-4 Type B0 using 12.50 mm graded aggregate used as in benching and coping

Material and labour for mild steel TMT bars 6 to 8mm bar

cut to length

bent to shape required

including cranking

bending

lapping etc as required and welding with existing Surface excavation n. exc 30cm depth and averaging 15cm deep

Mild steel TMT bars 10mm dia and over

cut to length

bent to shape required

Plates (plain or chequered) Grade 410-W (Gde E-250) quality-A channels

pre-painted galvalume sheets having pitch 190mm

depth 29mm

pre- painted plain galvalume sheets and not less than 0.50mm thickness

two coat of synthetic enamal paint over a coat of red oxide primer

steel work in tubular trusses including special shaped washer etc

Excavation in trenches in soft loose soil exceeding 1.5 m depth

providing cement concrete 1:4:8 type D2 using 40mm graded aggregate

brick work with sub class 'B' bricks class designation 75

old size

rendering 15mm thick in cement mortar (1:6) on fair faces of brick work

water proofing liquid Compound for concrete/mortar complete

preparation of new plastered suface and applying two coats of cement base paint

steel Roof trusses framed trussed

purlins crane gantries rails & fastenings

Returning fill incl spreading leveling watering & ramming layers not exc 25 Cm

75mm thick Cement concrete type B-2 1:2:4 40 mm graded aggregate

providing 40mm cement concrete type B-1

1:2:4 using 20mm graded aggregate

75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate)

Alumimium dividing strips

width of strip 28mm

1.5mm thick

reinforced cement concrete M- 25(design mix) in foundations

including rafts

Formwork to sides of concrete foundations

footings

bases of columns

rafts

reinforced cement concrete M-25(design mix)

formwork to sides of pillars

posts

struts

piers

columns and stanchions

reinforced cement concrete M-25 beams cantilevers bressummers lintels over 1.5m

formwork sides and soffits of floor beams & roof beams beam haunchings girders

Removing the surplus excavated material/soil to a distance not exc: 50 mtrs

Mild steel TMT bars 5mm dia and over upto and including 10mm dia

framed work steel door of gate of angle other sec with gusset plate rails brace

MS plain black sheet 1.0 mm thick steel gate wall cladding & sim wks cut to size

PCC (1:3:6) type C1 (using 20mm graded stone aggregate)

welded steel wire fabric n exc 4kg per Sqm fixed to steel members complete

MS wind ties for roof incl secur bolt post & strut fencing incl cutting

MS 5 to10 mm diameter of shank screw bolts (machine made)

concealed point wiring comp 1.5 sq mm 1 light/fan point by 1 way 5A switch

comp 1.5 sq mm FRLSH

PVC One 5 pin socket outlet 05 Amp

concealed point wiring with one 15 Amps socket 2.5 sq mm 1 core cable

single pole and neutral DB wall mounting type

240 Volts

8 Way with 100 Amps

wall mounted fan 450 mm turbo metal body with all accessories

vertical TPN DB 4 way in double door 415 volt

earthing complete with galvanized steel earth plate electrode 600X600X6mm

Automatic organic waste Bid Details 5/79