ADD/ALT AND CONSTN OF VENTILATION SYSTEM AND PAVEMENT AREA NEAR LPG STORE, PROVN OF INSPECTION PITS AT MT GARAGE, PROVN OF IRON GRILL CAGE FOR OHT TO BASE HOSP BLDGS, PROVN OF OFFICERS TOILET AT HOSP ADMINSTARATIVE DEPARTMENT AT BASE HOSPITAL BASISTH

Amount

S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed baluster; walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F welded steel wire fabric fixed to steel members, (weight not exc 4 kg/Sqm) including necessary preparation of surfaces and applying one shop coat of red oxide, zinc chorme prime complete all as specified and directed.

S&F 125 mm size Butt hinges, Heavy weight, cold rolled mild steel and fixed complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m in depth for for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc laying of cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L providing plain cement concrete type B-0, (1:2:4), (using 12.5 mm graded stone aggregate), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed complete all as specified and directed.

M&L PCC (1:2:4) type-B2 with using 40 mm graded crushed stone aggregate as in mass concrete for base etc complete all as specified and as directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and smooth without using extra cement complete all as specified and as directed.

M&L Preparing new plastered surfaces and applying two coats of white wash complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and pigment complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil,complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as directed.

M&L PCC (1:4:8) type B-2 (using 40 mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in in foundations, filling and mass concrete complete all as specified and as directed.

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and smooth without using extra cement plaster complete all as specified and as directed.

M&L Hardcore using Broken stone or bouldersof gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 100mm thick cement concrete (1:2:4) type B-2( using 40mm graded crushed stone aggregate) as in path/pavings laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the path/paving filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

S&F 10mm thick Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and as directed.

Demoliation of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in path/pavings laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L 40mm thick PCC (1:2:4) type B0(12.5mm graded stone aggregate) as in flooring finishing cement concrete surface even & smooth with using extra cement complete all as specified and as directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including necessary preperation of surfaces and appllying a coat of red oxide zinc chrome primer complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wirecomplete all as specified and as directed. Note: Chain link fence will be measured and paid seperately at Supply only rate under appropiate item

Supply only chain link MS galvanized fencing of any size or type complete all as specified and as directed.

S & F galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire , complete all as specified and directed:-(Each line wire to be measured)

S&F Steel work in tubular trusses/purlins/rafter/post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L prepration of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treated surfaces of walls including cornices, pillasters and other wall feathers etc by washing rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper over a coat of primer including necessary preperation of surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment of old existing treatment of old plastered or unplastered surfaces of walls and apply two coats of exterior emulsion paint (1st quality) over a coat of alkli resistant primer after application cement based of wall care putty (mimmum 1.5 mm th) complete all as specified and directed.

M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm)seperately mixed with and including water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.

M&L Rendering 5 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 for finished even and fair complete all as specified and as directed.

M&L factory made PVC internal door frame of size 100mm x 45 mm with a wall thickness of 5mm, made out of extruded 5mm thick PVC sheet of density 600 kg/cmb, and by joining 3nos. Heat bend PVC sheet sections. The inside section of size 90x30mm shall be made from plain color PVC sheet of 5mm thick. The inside section will be covered by sticking two sections of size 30x35mm and 70x45mm made from 5mm thick plain PVC sheet. The frame shall be miter cut at two corners and jointed with 4nos. of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 gauge through out the frame. The door frame shall befixed to the wall using 8/100mm long MS screws throught the frame by using anchor fasteners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc completed all as directed. Make : Rajshri Plastiwood or equivalent as approved by GE from list of approved makes.

M&L 30mm thick factory made moulded PVC door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top, bottom and lock rail. M S frame shall have a coat of metal primer of approved make and manufacturer. The inside penal shall consists of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cyanoacrylate adhesive with 5mm thick moulded PVC sheet of density 600Kg/Cbm with 2,4,6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel. 5mm prelam PVC sheet to be pasted using solvent cement/cyanoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made bysticking 02 Nos. from PVC sheets of 5mm thickness using PVC solvent cement adhesive. Door edge liping to be painted with PVC ink of matching colour of prelam mouded PVC sheet of door. 20mm thick (5mm x 4Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 Nos stainless steel but hinges of size 100mm x 25mm x 2mm & 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardswares should be fixed with 25mm x 8mm size still screws etc completed all as directed. Make :Rajshri Plastiwood or equivalent as approved by GE from list of approved makes.

M&L Non skid coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc.18 sqm but not exc 0.38 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L coloured glazed ceramic tiles coloured in vertical surfaces 600x300x 9-10mm thick, set and jointed in neat cement slurry and pointed in white and colour cement to match shade of tiles including cement screed 10 mm thick 1:4 complete all as specified and as directed.

S&F towel rail 600mm, 20mm dia, D type of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts,450mm length complete all as specified and as directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed.

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F WC floor mounted with PP Soft Close Seat Cover, Hinges, Fixing Accessories, Accessories Set and Cistern , Cistern fitting, Size:360x640x685mm,S trap-250mm all as specified and as directed

S&F 15mm bore Angular Stop cock with Wall Flange complete all as specified and as directed

S&F Table top wall hang basin with fixing accessories,size :425x345x175mm including waste coupling complete all as specified and as directed

S&F Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed

S&F 15mm bore, 2 way bib tap, chromimum plated and fixed complete all as specified and as directed. complete all as specified .

S&F health faucet (ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook all as specified and as directed

S&F vitreous china , white wall mounted Urinal with fixing acessories, size 375x315x620 mm complete all as specified .

S&F Toilet roll holder, chrome finish complete all as directed

S&F Reflection looking mirror of size 600x450mm fixed to wall with chromium plated brass screws and cup washers all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 1000 ltrs capacity complete all as specified in SSR Part I, including writing date of cleaning on tank using stencil in white syntheic paint height not exc 30cm ("DATE OF FIXING: DATE") complete all as specified and as directed

M&L 18-20 mm Granite (of any type) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm thick screed bed or bedding layer cement mortar (1:6) complete all as specified and directed.

M&L prepration of new plastered surfaces of wall applying two coat of acrylic emulsion distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturerover, of required shade and colour over a coat of primer complete all as specified and as directed.

M&L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. flat, roughed finished surfaces, complete all as specified and as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.. flat, roughed finished surfaces, complete all as specified and as directed.

M&L Formwork to sides to of pillars, posts, struts, piers, columns and stanchionst, roughed finished surfaces, square, rectangular or polygoan complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping).. flat, roughed finished surfaces, complete all as specified and as directed.

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L RCC M25 design Mix (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L RCC M25 design Mix (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L RCC M25 design Mix (20mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L RCC M25 design Mix (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L 100mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in floor laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L water proofing treatment to flat roofs and edges, applying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester febric weight not less than 150gms per Sqm over a coat of bituminous primer @ 0.3Kg/Sqm, after necessary cleaning the surfaces. Polymeric membrane shall be taken to a height of 30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing, complete all as specified and as directed. Note : (a) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (b) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction.

S&F Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m over APP membrane complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar plaster (1:4) laying of APP membrane mixed with liquid water proofing componud as per manufacturers instruction complete all as specified and as directed.

M&L for concealed point wiring for light/fan points controlled by one, one way switch with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirming to IS specifications, including provision of flush modular mounting boxes, with back plate and cover plate of appropriate size & thickness for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for Modular boxes & making good to walls, floors etc. complete all as specified & as directed .

All as per item No 76 here-in-above but for one 6 amps socket out let point on independent board.

All as per item No 76 here-in-above but for one 6 amps socket out let point on the same board with other switches

S&F LED lights fitting 1x 20Watt, 220Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 Volts, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, complete all as specified and directed.

S&F Modular shuttered Socket outlet 3/5 Pin, 6 Amp, 2 Module, 230 volts, complete all as specified and directed.

S&F ceiling rose, PVC/ polycarbonate, isolated body, three terminals, complete all as specified and directed.

S&F Modular shuttered Socket outlet 3/5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 protection, double door, Single pole & neutral, complete including blanking plates as required & flush to wall/other surface complete all as specified and directed.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), IP-43 protection, double door, Single pole & neutral, complete including blanking plates as required & flush to wall/other surface complete all as specified and directed.

S&F MCB, SP, C Series 240 Volts, 6-32 Amps 50 HZ, 10KA complete all as specified and directed.

S&F MCB, SPN, C Series 240 Volts, 63 Amps 50 HZ, 10KA complete all as specified and directed.

S&F 300mm sweep, exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with multi stranded aluminium conductor of size 6 sqmm 2 core complete all as specified and as directed.

M&L sand cushioning in cable trenches over & under the cable, with river washed coarse sand,(approved source) as per standard practice with proper compaction complete all as specified and directed.

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified and directed.

S&F 50 mm dia GI pipe ‘light grade’ with all fittings for protection of cable laid in trenches, road crossing, drain crossing, under floor or fixed to iron structures/poles complete all as specified and directed.

M&L 20mm outer diameter, 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and as directed.

M&L 20mm outer diameter, PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed.

Making connection of PP-R distribution branch with PP-R main of Outer dia of pipes 50 to 75mm sizes by providing and fixing tee including cutting and making fusion joint etc.complete all as directed.

Spreading and levelling of soil in layers n exc. 25 cm thick, well ramming including watering as required complete all as directed. Note: (i) Earth obtained from Excavation shall be used in item. (ii) Payment shall be done on the basis of compacted thickness as defined in MES SSR 2010 (Part II) Clause No 3.6.

M&L mild steel work Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. conforming to Fe.290.Gde-E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for Pre polished chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over cement screed 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L for light shade vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set and jointed :in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer 1:6 complete all as specified and as directed.

S&F ceiling fan 1200 mm sweep, Air Delivery not less than 210 CFM, heavy duty, single phase, AC, 230 Volts, 50Hz, 5 star rating, ISI marked complete with 30 cm down rod, canopy, blades, motor etc and connecting up complete including provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified & as directed.

M&L RCC M25 design Mix (20mm graded aggregate) in chajjas complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges. flat, roughed finished surfaces, complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

M&L 25mm thick Damp proof course to horizontal or vertical surfaces in In cement concrete 1:2:4, type B-0 including necessary formwork complete all as specified and as directed.

M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast jamb including formwork as required complete all as specified and as directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with Particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made second class hardwood 30mm thick Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 125mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

M&L preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L 75mm thick PCC (1:4:8) type D2(40mm graded stone aggregate) as in sub base of floor finished even and fair complete all as specified and as directed.

M&L 40mm thick PCC (1:2:4) type B0(12.5mm graded stone aggregate) as in flooring finishing cement concrete surface even & smooth with using extra cement complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including cement screed 20 mm thick 1:6 complete all as specified and as directed.

M&L Machine cut kota stone slab in riser of steps, skirting, dado and pillar 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including cement screed 15 mm thick 1:4complete all as specified and as directed.

M&L 100mm thick cement concrete (1:4:8) type D-2( using 40mm graded crushed stone aggregate) as in floor laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over 50mm thick sand bed layer complete all as specified and as directed. Note:- Sand bedding shall be measured and paid seperately under appropiate item

M/S RAJA CONSTRUCTION

TONMOY DAS