PROVN OF BOUNDARY WALL AT SHAKTI DWAR TWO WHEELER PARKING SHED WITH HARD STANDING AT MI ROOM, SPECIAL REPAIR TO BLDG NO T 17 NEAR JCOS CLUB AND SPECIAL REPAIR TO ROOF TREATEMENT TO BLDG NO P 04 RP LINE IN RA AT CAD PULGAON

Amount

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in any type of soil and getting out complete all as specified and as directed.

M & L cement concrete type D-2 1:4:8 (Using 40mm graded stone aggt) in foundation filling and mass concrete complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1 : 4 complete all as specified and as directed.

M&L for Raised pointing to random or polygonal rubble, un coursed or brought upto courses CM 1:4 complete all as specified and as directed.

M&L for Brick work with fly ash old size bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1 : 4 complete all as specified and as directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil,all as specified.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling andpost hole filling, all as specified and directed

S & F of Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate complete all as specified and directed.

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor complete all as specified and directed.

M & L for preparation of New or previously un-treated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based crumpled corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa and AZ-150 as in ridge fixed with self tapping screws complete all as specified and as directed.

Dismantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed works complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed.

Taking down chowkats or frames with shutters n,exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed.

--do-- but exc 1.50 Sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down shutters exc 1 Sqm and n,exc 2 Sqm each complete all as specified and as directed.

All as above but not exc 1 Sqm each complete all as specified and as directed.

S&F for second class hard wood plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 2nd Class Hardwood 35 mm thick glazed and skeleton shutters open rebated & prepared to receive glass, gauge etc without sash bars edges & mitred beads for securing glass/gauge etc complete all as specified and as directed.

Supply & Fixing 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

S&F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe - 290 Gde E - 165 complete all as specified and directed.

S&F of 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F of Stainless steel wire cloth, 0.36mm normal dia of wire and avg. width of aperture 1.40 mm and fixed with stinless steel wire staples complete all as specified and directed.

All as above but in repairs

Cutting holes in stone walls built in cement mortar or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.

M&L Cement Concrete type C-0 (1:3:6) using 12.5mm graded aggregates as in filling in pressed steel chowkhat, fixing of hold fast etc complete all as specified and as directed.

S&F 100 mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed.

S&F 150 mm aluminium anodised, barrel tower bolts of extruded section all as specified and as directed

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm butt hinges, aluminium anodised of extruded section complete all as specified and as directed

S&F 100 mm aluminium anodised, barrel tower bolts of extruded section all as specified and as directed

S&F 100mm extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed

M&L for preparation of new wood or wood based surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed.

Demoltion of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L for glazed ceramic tiles coloured of size 350x250x7mm/ 450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick screed bed in CM 1:4 including dismantling of existing wall tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

All as above here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 including dismantling of existing skirting with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L 8-9mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified and as directed.

M&L for 75mm PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in plinth protection even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B2 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.

Taking down cement plaster of any description on brick/ Stone Walls or from Concrete Surfaces incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside premises complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work, stone masonry or concrete surfaces (internal) finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 15mm thick rendering in two coats on stone/ brick/ concrete surfaces (external) finished even and smooth without using extra cement etc. 1st coat 10 mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mix with water proofing compound as per manufacturer instructions complete all as specified and as directed. Note : WPC shall measured and paid Seprately

M&L preparation of new or old plastered/unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty on new plastered surfaces of wall complete all as specified and as directed.

M&L for preparation of new or old plastered/unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.

M&L for preparation of old plastered/unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

Taking down steel tubing 15mm bore and connection including cleaning for re-fixing.

Refixing old steel tubing and connection new or old position on wall or under floor 15 mm bore of pipe complete all as specified and directed by EIC.

S&F 15mm bore medium grade glavanised tubes with all fittings and fixed complete to walls/floor etc complete all as specified and as directed.

Taking down steel tubing 20mm bore and connection including cleaning for re-fixing.

Refixing old steel tubing and connection new or old position on wall or under floor 20mm bore of pipe complete all as specified and directed by EIC.

S&F 20mm bore medium grade glavanised tubes with all fittings and fixed complete to walls/floor etc complete all as specified and as directed.

M&L for cutting chases for concealed pipe where required and pointing in cement mortar 1:3 etc, in stone, concrete block or slab walls complete all as specified and as directed.

S&F in repairs rotational moulded polyethylene water storage tank tripple layered (cylindrical vertical with closed top) hoisted and fixed in position of 500 liters capacity confiring to IS specification, incl 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs for vitreous china wash basin white flat back, size 580x450mm incl brackets, cutting for and pinning in ends of brackets or erecting stand, incl 32mm waste coupling of PTMT (half or full threaded) and waste pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs CP soap dish approximate size 160x160x90mm complete all as specified and as directed.

S&F in repairs 15 mm bore dia of Pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, scewed for union pipe and fixed to 15mm dia pipe complete all as specified and as directed.

S&F in repairs 15mm bore dia of stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15mm bore dia of angle valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15mm bore dia Bib tap chromium plated with crunch or butterfly handle , screwed for iron pipe or for brass pipe and fixed complete all as specified and as directed.

S&F in repairs 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete complete all as specified and as directed.

S&F in repairs chromium plated shower rose 125mm size complete all as specified and as directed.

S&F in repairs tubular towel rail aluminium anodised, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed.

S&F in repairs CP grating 110mm.

Taking down existing water proofing treatment incl PCC padding and screed bed complete of any description from RCC roof slab by scraping by means of MS scrapper patty or by any suitable tools until the concrete surface of the slab visible and removal of rubbish off the premises as directed to a distance not exc 100 mtr all as complete specified and as directed.

M&L for 25mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) laid on roof slab finished even and fair complete all as specified and as directed.Note : WPC compound shall be measured and paid separately.

M&L for rendering 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer's instructions laid over roof slab finished even and smooth without using extra cement whilst the concrete is still green complete specified and as directed. Note : WPC compound shall be measured and paid separately.

Supply only Integral water proofing compound complete specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) all as specified and as directed.

M&L for APP polymeric water proofing membrane 3.00 Kg per sqm and min 3 mm thick reinforce with polyster non wooven fabric (wt not less than 150 gms/sqm) laid over roof surface with 100 mm over lap and including vertical surfaces upto required height and tucking into grooves and sealing complete with thermofusion, torch application over compatible bitumen primer at 0.40 ltr/sqm including bituminious aluminium paint @ 0.3 kg per sqm including cleaning surfaces all as instructed as per manufacturer and directed

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth with out suing extra cemebt using WPC as per manufacturing instruction Complete all as specified and directed.

M & L rendering 5mm thick in CM 1:3 and finish the surface even and smooth without using extra cement as in ceiling, soffits of slab complete all as specified and as directed.

M & L three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed.

S&F for stack clamps made out of 25mmx3mm thick flat iron made to shape as directed incl plug and screws for securing ends of stay to walls for sanitary pipe fore 75/100mm bore dia of pipe including taking down old clamps etc complete all as specified and as directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Ditto but of 75mm bore complete all as specified and as directed.

S& F PVC(SWR) junctions single (Single T) equal or unequal, dia of bore 110 mm complete all as specified and as directed.

PVC (SWR) vent cowl , bore 110 mm complete all as specified and as directed .

PVC (SWR) 'P' trap bore 110mm/100mm complete all as specified and as directed.

PVC (SWR) 'S' trap bore 110mm/100mm complete all as specified and as directed.

PVC (SWR) floor trap plain with grating with solvent cement ( 75 mm dia ) complete all as specified and as directed.

Disconnecting existing tanks of 500- 1000L tanks, setting aside (or lowering if required) for repairs, cleaning, etc. andhoisting if required reconnecting and re-fixing in position.

Chhabra Enterprises

M/s Prakash Agencies

SHRI RANI SATI TRADERS

SHUBHAM SALES

M/S Maa Durga Constructions,Pulgaon

Attar Singh and Sons

Krishana electronics

NEELKAMAL BUILDERS

Bidder Name

Attar Singh and Sons

SHRI RANI SATI TRADERS

M/s Dara Constructions, Pulgaon

M/S Maa Durga Constructions,Pulgaon

M/s Prakash Agencies

NEELKAMAL BUILDERS

Krishana electronics

SHUBHAM SALES

Chhabra Enterprises