PROVN OF DRAINAGE SYSTEM AND REPAIR TO DRAIN N AND CONNECTED WORKS AT DIFFERENT LOCATIONS OF N-4 AREA AT AFS CHAKERI KANPUR

Amount

Surface dressing of soft/loose soil not exceeding 15 cm deep complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m depth and 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated materials not exceeding 50m and depositing as directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m & making good surface,complete all as specified and directed.

M & L PCC (1:2:4), type B 2 using 40 mm graded stone aggregate as in boundary pillars and posts complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curve on plan exceeding 6 m mean radius built in CM (1:4) complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan to any radius in half bricks built in cement mortar (1:4) complete all as specified and directed.

M & L for 15 mm thick rendering on fair face of brick wall in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M & L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base finished rough to receive topping layer complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in floors finished even & smooth without using extra cement complete all as specified and directed

S & F coloured galvalume corrugated sheet with base metal thickness (BMT) 0.50 mm, multi rib profile, minimum 550 Mpa yield stregth having maximum pitch of 250 mm c/c and minimum 28 mm crest depth as in roof covering / cladding to wall fixed with self tapping screw, complete all as specified and directed.

S & F coloured galvalume plain sheet with base base metal thickness (BMT) 0.50 mm, multi rib profile, minimum 550 Mpa yield stregth having maximum pitch of 250 mm C/C and minimum 28 mm crest depth as in roof covering / cladding to wall fixed with self tapping screw, complete all as specified and directed.

M & L for framed MS work as in steel doors including gusset plate,rails,bracket,MS plate, steel Sheet and angle section, flat section conforming to FE 410 complete all as specified and directed.

M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, plates confirming to Fe 410 Gde E250 etc. complete all as specified and directed.

M & L for preparation of surfaces and applying three coat of white wash on newly platered surface of ceiling complete all as specified and directed.

M & L for preparation of newly steel surface and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Supply only chain link MS galvanisd fencing having size 75 mm x 75 mm x 3.15 mm of any description complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, round bars etc. including provision of binding wire complete all as specified and directed.

Supply only mild steel round bars 10 mm and over dia cut to length bent to shape as required horizontally/vertically woven in chain link fencing complete all as specified and directed.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end and fitted with washer and one hexagonal or square nut 5 to 10 mm dia, exceeding 5cm but not exceeding 10cm long complete all as specified and directed.

M & L for 75 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M & L for forming contration (dummy) joint of size 65 mm deep x 10 mm wide, filled with sealing compound grade 'B' as required complete all as specified and directed.

M & L for earth work in all kind of soil by mechanical means (hydraulical excavator) as in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil including returning filling in (as required) and disposal of surplus soil out of MD land complete all as specified and directed.

M & L fo PCC (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete, completed all as specified and directed.

M&L for plain cement concrete (1;2:4) type B-1using 20 mm graded stone aggregate in coping /benching and similar work rounded or chamfered on edges including necessary form work complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surfaces channel and drains complete all as specified and directed. .

Extra for forming fair finished drain or channel up to 150 cm inner girth in cement concrete, using extra cement including forms, moulds,/stopped ends etc complete all as specified and directed. .

M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with mild steel wires (annealed not less 0.9 mm dia complete all as specified and directed.

M&L for providing pre-cast RCC cover slab etc of cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate and set in CM (1:6) complete all as specified and directed. .

M & Lfor PCC (1:3:6) type C2 using 40mm graded stone aggregate as in bed to drain pipes of 450 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S & F 450 mm bore, Reinforced concrete pipes, class NP-3, laid and jointed with cement mortar (1:2) with jute with collars, complete all as specified and directed.

S & F stainless steel kithen plate rack of size 600 mm x 750 mm x 250 mm including all screws and fitings complete all as specified and directed. Make- Payag cat part No P-330 or equivalent as per approved by GE in writing.

Demolition of brick work masonary built in cement mortar including all quoins, arches pillars etc, complete all as specified and directed.

Demolition of recinforced cement concrete such as roofs, floors, slab cover, beams, landing and similar suspended work complte all as specified and directed.

kailash brothers

m/s sahu enterprises