CERTAIN BR MISC REPAIRS WORKS IN MES INSTALLATIONS SUB STATION BLDGS REPAIR TO SECURITY INFRASTRUCTURE COMPOUND WALL FENCING RETAINING WALL GATES PERIMETER WALL AND REPLACEMENT TO BARBED WIRE CHAIN LINK FENCING CONCERTINA COIL COPING ETC INSIDE GTRE

Demolishing cement concrete padding in roof (unreinforced) including removal of existing roof treatment of any description and in any position roof not otherwise specially provided for and including removing debris to a distance exc. 5KM but not exc. 15 KM outside MD land complete all as specified and as directed by Engineer-in-Charge.

Providing and laying cement concrete type B0 (1:2:4), using 12.5mm graded stone aggregate in padding concrete over roof slab 30mm to 40mm average thickness up to floor five level, excluding the cost of centering, shuttering complete all as specified and as directed.

Material and labour for 15mm thick rendering on fair faces of brick work or roof concrete surfaces in CM (1:3) and finishing the surfaces even and smooth without using extra cement mixed with water proofing compound complete all as specified and as directed. NOTE :- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for rooof treatment comprising of the following :- (i) Mechanical cleaning of surface to make it free from any bituminous residue / dirt, oil and Greece etc complete all as specified and as directed by GE / Engineer-in-Charge.

(ii) Cracks treatment by cutting open cracks and cleaning it from dirt / loose materials etc and filling with polyurethane based sealant with and including application of PU based primer complete all as specified and as directed by GE / Engineer-in-Charge.

(iii) Applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of primer of same materials after dilution of water at 50% or specific primer matching same materials as per manufacturer specification and as directed by GE / Engineer-in-Charge. A layer of Geo textile grid of minimum 40 GSM sandwich in between two PU layers as per manufacturer's specification to be provided. MAKE : Bostik / Berger/ Fosroc/ Sika/ Asian/Dr Fixit or any other make approved by E-in-C's Branch for PU based water proofing treatment. NOTE :- Work shall be carried out by the authorised Applicator of the manufacturer only with prior approval of GE.

Material and labour for Plain Cement Concrete, (1:2:4), type B0, using 12.5mm graded stone aggregate, providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Uprooting or scrubbing plants / shrubs / flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM (1:3) mixed with and including water proofing compound complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

Materials and labour for rolled mild steel framed work as in gates, grills, grating, pintel hinges stop, hand made sliding bolts, Weld mesh etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars and for ornamentals and intricate design conforming to Fe 410 -W (Gde- E- 250) of angle iron of other sections complete drilled for fixing of steel sheeting or other coverings to be prepared for handing or sliding with and incl either hooks and hinges doors (Exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing with one shop coat of zinc chromate paint (including preparation of surfaces at contractor work shop before fabrication) complete all as specified and as directed.

Material and labour for 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, with welded seams, including bending or turning up, mitred angles, etc. as require complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint of approved tint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc. 10 cm width or girth, complete all as specified and as directed.

Material and labour for preparation of new steel surfaces n.exc 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and as directed.

Dismantling of stone slabs and tiles laid dry of any description or thickness in floors, aprons, complete all as specified and as directed.

Demolition of Plain Cement Concrete in ground floor and paving n.exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:4:8 Type D2, using 40 mm graded stone aggregate as in Cement concrete in foundations, filling and mass concrete or Sub base as directed finished fair and even complete all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed.

All as per Ser item No 19.00 above but except pavers, complete all as specified and as directed. NOTE :- Old serviceable interlocking paver blocks obtained from demolition / dismantling shall be reused."

Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for providing 100mm thick vaccum dewatered floor of Ready Mix Concrete (M-25 grade) including side shuttering (MS channel) and vibrating the same using double screed vibrator, removal of excess water using vaccum pump, suction matt, floating and levelling of concrete to the required finish using skin floater and power trovel complete all as specified and as directed.

Supply and application of non metallic floor hardener @ 3 Kg/Sqm on wet concrete mate (SCIA Fosroc or equivalent) complete all as specified and as directed.

Cutting the groove of size 3mm x 20mm using diamond cutter on vaccume dewatered floor and filling the same with bitumen complete all as specified and as directed.

Material and labour for 100mm thick Plain Cement Concrete, type B2, (1:2:4) using 20mm graded stone aggregate as hard standing as directed finishing the surfaces fair and even complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete type C-1 (1:3:6), using 20mm graded crushed stone aggregates as in plinth protection finished fair and even without using extra cement complete all as specified and as directed. NOTE :- The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

Material and labour for 40mm thick Plain Cement Concrete type B-1, (1:2:4) using 20mm graded stone aggregate as in Cement concrete in flooring as directed finished fair and even complete all as specified and as directed.

Demolition of Reinforcement of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for pre cast Reinforced cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in cover slabs for man holes, water tanks etc., set in CM (1:4) complete all as specified and as directed.

Material and labour for TMT steel works as in reinforcement using 10mm dia and over bars cut to length bent to shape as required for hoping of column hooking ends and spirally and binding with MS wire annealed not less than 0.90mm dia complete all as specified and as directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry type C1 (1:3:6) using 20 mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in cement and sand mortar (1:4) complete all as specified and as directed.

Material and labour for stone walling of squared rubble(Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and as directed.

Material and labour for stone walling of squared rubble(Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM (1:4) but except stone complete all as specified and as directed.

Material and labour for flush pointing to square rubble masonry brought upto courses in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

Raking out joints to random rubble or polygonal rubble or square rubble or uncoursed or brought upto courses in cement mortar complete all as specified and as directed.

Taking down cement plaster of any description, thickness including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and rough complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar (1:6) including finishing the surface even and smooth complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for rendering 5mm thick on fair faces of brick work or concrete surfaces of chajja / facia / ceiling etc in cement mortar (1:3) including finishing the surface even and smooth complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Supply and fix for chicken wire with mesh size 25mm from 0.9mm galvanized wire fixing / installed to damaged celling, brick walls and chajjas etc in interior and exterior plastering complete all as specified and as directed.

Material and labour for dubbing out average 15mm thick Cement plaster (1:4) on irregular face of damaged walls and Ceiling surfaces complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in Concrete, and making good disturbed ground complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply and fix rolled mild steel angle iron fencing post and sturts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape, curved or ramped portions of hand rails to required shape or figure as required and drilling holes notching for wires etc conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply only for chain link MS galvanised fencing any size, complete all as specified and as directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply and fix rolled mild steel flat iron for securing bolts post and strut in fencing including cutting drilling holes notching for wire etc. flat iron filet and similar work conforming to FE Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n.exc 10 cm long and dia of shank 5 to 10 mm complete all as specified and as directed.

Dismantling steel barbed wire, any type and any description from steel post / RCC Post etc, complete all as specified and as directed.

Supply and fixing for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. NOTE : Each line wire to be measured.

Material and labour for full servicing of existing manually or mechanically operated rolling shutter, including cleaning, repair, lubrication, alignment, and operational testing to ensure smooth, safe, and noise-free functioning, area of rolling shutter n.exc. 12.00 Sqm complete all as specified and as directed.

Work Details :- Inspection & Assessment :- Inspect the complete shutter assembly: curtain slats, guide channels, bottom rail, springs, shaft, ball bearings, brackets, side covers, and locking system. Identify worn-out, rusted, or damaged parts for repair or replacement. Cleaning:- Clean the shutter curtain, guide channels, and all moving parts to remove dust, rust, and grease deposits. see wire brush or emery paper where necessary for rust removal. Lubrication:- apply approved-grade lubricating oil/grease to: Springs and shaft bearings, Roller and pulley system, Guide channels and joints, Locking mechanism, Ensure free and noiseless operation after lubrication. Adjustment & Alignment:- Adjust spring tension to achieve smooth up-and-down movement. Align shutter curtain within guide channels to avoid jamming. ensure proper balancing and locking position at top and bottom levels. Testing:- Demonstrate proper functionality to the engineer-in-charge.

Supply and fix of Winch Handle / Gear-Handle for Existing Rolling Shutter complete all as specified and as directed.

Supplied and fixed for 1.00mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, including taking down unserviceable rolling shutter with fittings, complete all as specified and as directed.

Supply and fix for 3mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed.

Material and labour for applying two coats of exterior emulsion weather proof paint over a coat of primer on new plaster wall surfaces including preparation of new plaster complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for applying 1.00 to 1.50mm thick wall care putty on walls for preparation of even and smooth surface at any location including filling the holes of nails and scratches preparation of surface complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper of approved tint on wall surface over a coat of primer as per manufacturer instructions including preparation of newly plastered surfaces complete all as specified and as directed.

All as per Ser item No 59.00 above but on ceiling surface complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Complete removal of existing treatment (white wash, colour wash, cement base paint or any other treatment) of wall by brooming down on steel wire brushing scrapping down smoke soot moulds, moss and efflorescent salts and trading oil greasy spot etc complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for applying two coats of oil bound distemper of approved tiint on walls surface (as per manufacturer instructions) including preparation of old plastered surfaces complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc applying one coat of oil bound distemper of approved tint on old decorative surfaces of walls complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down of lime scale, smoke soot, trading oil and greasy spots etc applying one coat of oil bound distemper of approved titn on old decorative surfaces of ceiling complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint of approved tint any description not otherwise described over 10cm width or girth complete all as specified and as directed. NOTE :- Work shall be executed for buildings of height upto 15 mtr including all necessary scaffolding without any extra cost to Govt.

Material and labour for preparation of old painted steel surfaces and applying one coat of Aluminium paint of any description not otherwise described over 10cm width or girth complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from steel frames complete all as specified and as directed.

Supply and fix sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane 3mm thick complete all as specified and as directed.

Material and labour for rolled mild steel work as in hold fasts, knee piece and similar small article confirming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm in each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area exc. 1.50 sqm but n.exc. 4 sqm in each complete all as specified and as directed.

Supply and fix 100mm size mild steel butt hinges heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix 300mm length of Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Providing and laying cement concrete (1:2:4), type B1 using 20mm graded stone aggregate for anchoring door and window hold fasts, including cutting out existing concrete blocks, bricks, or stone masonry (in alternate courses) to form toothings, removing debris, preparing and cleaning bonding surfaces, applying cement slurry, laying new masonry in cement mortar (1:4), curing and finishing to match adjacent surfaces all complete all as specified and as directed by the Engineer-in-Charge.

Cuttings out old existing hinges any type from existing steel windows / ventilators and providing new box type steel hinges to fix the old windows / ventilators and making good complete all as specified and as directed.

Providing and fixing Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing including 50 micron thick powder coating etc. complete all as specified and as directed.

Providing and fixing anodised aluminium window and ventilator shutters with powder-coated aluminium sections (minimum thickness of powder coating 50 microns), fixed type and sliding type window shutters, without sash bars, including necessary aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, stainless steel screws and all fittings, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix Sheet glass 4mm thick, ordinary quality and glazing in square area exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix rolled mild steel as in framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down rain water pipes (any size or pattern) including all fittings bends etc complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed, type 'B' in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) bends any radius type 'B' complete all as specified and as directed.

Removing building materials / debris to a distance up to 10 KM or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination outside MD land complete all as specified and as directed.

Please Enable Macros to View BoQ information