801559/E8 PROVISION OF CERTAIN WORK SERVICES FOR WASHING BAY AT TWIN HANGAR AT AFA HYDERABAD

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to VI, VIA are prepriced by MES under Ser Nos. 2.00 to 8.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Building or works” as listed in Schedule ‘A’ Part - I inserted by MES.

Lumpsum price worked out by the contractor for “Internal Electric Supply” as listed in Schedule ‘A’ Part - II inserted by MES.

Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part - III inserted by MES.

Lumpsum price worked out by the contractor for “External Water Supply” as listed in Schedule ‘A’ Part -IV inserted by MES.

Lumpsum price worked out by the contractor for “External Electric Supply” as listed in Schedule ‘A’ Part -V inserted by MES.

Lumpsum price worked out by the contractor for “Lightning Conductor” as listed in Schedule ‘A’ Part -VI inserted by MES.

Lumpsum price worked out by the contractor for “PQC Floor for Apron” as listed in Schedule ‘A’ Part - VIA inserted by MES.

Schedule ‘A’ Parts VII and VIII are not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.

Schedule 'A' Part - VII : Design, Supply and erection of Pre-Engineered building steel structure for Aircraft washing bay shelter of size 32m x 15m and 6m height with profile pre-painted Galvalume sheet 0.50mm thick, RCC M-25 Design mix foundation, anchor bolt in the base and bed plates, PQC floor and underlayers, solid block masonry in side walls upto 0.9 M height, plastering in cement mortar, plinth protection, bird proofing, Epoxy coated paints to structural steel surface. etc complete all as specified and as shown on drawings. Note: (i) PQC floor and underlayers in Washing bay shelter as specified in schedule of finishes are deemed to be included in the quoted Lumpsum. However PQC floor and under layers in Apron shall be measured and paid against Sch 'A' Part - VIA.

Design, Supply and erection of steel truss and column for covered shed of size 10m x 5m and 3m height with profile pre-painted Galvalume sheet 0.50mm thick, RCC M-25 Design mix foundation, anchor bolt in the base and bed plates, flooring and underlayers, plinth protection, etc complete all as specified and as shown on drawings.

Schedule 'A' Part - VIII : Fittings, Fixtures & Misc items: INTERNAL ELECTRIC SUPPLY Supply and fix SMC (Sheet Moulded Compound) junction box, outdoor type, IP-65 protection, of minimum size 140mm x 140mm x 95mm, fixed with 4 way bakelite cable connectors inside box including 03 Nos polynide gland with check nut (M20 - 03 Nos), including necessary clamps made out of mild steel flat iron, nuts, bolts etc for fixing on channel/angle/wall including painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Supply and fix wall socket with DIN rail made of thermoplastic sheet having IP-67 protection single pole neutral and earth socket with phase, neutral and earth plug watertight complete with one SPN MCB 32 amps capacity complete all as specified and as directed.

Supply and fix wall socket with DIN rail made of thermoplastic sheet having IP-67 protection triple pole neutral and earth socket with three pin, neutral and earth plug watertight complete with one TPN MCB 32 amps capacity complete all as specified and as directed.

Supply and fix LED aviation light luminaire integral LED aviation light comprising of aluminium housing with polycarbonate enclosure including all necessary fixing arrangements all as specified and as directed.

Supply and fix surface highbay 200 watt LED light fitting energy saving, environment friendly with PDC housing suitable for ceiling (Surface/Suspended) mounting complete all as specified and as directed.

Supply and fix LED flood light 200 watt white colour including all fixing arrangement all as specified and as directed.

Supply and fix LED street light 210 watt white colour light made up of pressure die cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection complete all as specified and as directed.

Supply and fix security light brackets of GI pipe medium grade 40mm dia upto 1.5 mtr long bend to shape at 100-120 degree including arrangement of fixing at channel/angle with the help of flat iron clamps and suitable nuts and bolts including all material required for fitting, including welding and drilling hole inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and as directed.

EXTERNAL WATER SUPPLY Supply installing connecting and commissioning open well submersible pump set capacity 2 HP, 288 LPM at 80 feet head, 3 Phase 415 Volt 50 Hz inlet size 65mm out let size 50mm including fixing complete all as specified and directed by Engr-in-Charge. Make Kirlosker model No KOS-225M or equivalent approved by GE

Supply and fix flat water proof submersible cable copper wire 6 Sqmm 3 core complete all as specified and directed by Engr-in-Charge

Supply installing connecting and commissioning monoblock pump set capacity 2 HP, 240 LPM at 10m head, 3 Phase 415 Volt 50 Hz inlet size 50mm out let size 40mm including fixing complete all as specified and directed by Engr-in-Charge. Make Kirlosker Model No KDI-225 EES or equivalent (one as standby)

Supply and install high hydro pressure test pump suitable to generate high pressure upto 120 bar with 42 LPM flow rate for hydroblast pressure wash of aircrafts duly coupled with 15HP electric motor 1440 RPM all wetted part made from SS 304 material input and out put connection 20mm, including control panel for automatic operation on jet pump, on off switch, single phase preventer, over load relay, main contactor, volt meter, Amp meter and indicating lamp for R-Y-B, motor run, overload with suitable pressure switch and all connected accessories make :Ambica Machine Tools Model No AMTLP-25/42 or equivalent ELGI, Kirloskar and Pressure Jet Pvt ltd Including following Items

i) Electric motor 15 HP /1450 RPM /3 Ph. /415 V /50Hz Foot Mounted -1 ii) Base frame Made from 3 X ½” Box Pipe With Trolley 16” Inch Rubber Wheel -1 iii) Control Panel Box Suitable for up to 75 HP Electric Motor -1 iv) Coupling Tyre Type - 100 Nos.- 1 v) Coupling Guard Made from – Mild Steel - powder coated -1 vi) Pressure gauge glycerin filled-dial 4"-800 bar – NABL CERTIFICATE – SS 304 Body- 1 vii) Pressure regulating valve Made from Fully SS 304 Material -1 viii) Heavy Duty Suction Filter (Y Type) made from Fully – SS 304 - Size 1” Inch -1 ix) Safety valve Made SS 304 Material- 1 x) High pressure rubber hose minimum 250 Bar Capacity – BSP – Swivel – Female 3/4" x 20 mtrs - 1 xi) L.P. Suction hose 1" BSP – Swivel – Female Connection X 5 mtrs- 1 xii) L.P. Bypass hose 3/4 " Connection x 5 Mtrs 1 xiii) Booster pump 1.5 HP 2880 RPM - 3 Phase – Monoblock Type - Make – Kirloskar, Lubi / CGL- 1 xiv) External non return valve -1/2" – Made from SS 304 Material 1 xv) High Pressure Jet Gun with 600 mm SS 304 Lance with V Jet Nozzle -1

Supply hoisting and fixing rotational moulded poly-polythen water storage tanks include for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc, (cylindrical vertical with close top ) hoisting in position including connection union as required capacity 5000 Ltrs all as specified and directed.

Supply and fix Foot Valve conforming to IS 4038, 50 mm (2”) dia complete all as specified and directed by Engr-in-Charge

EXTERNAL ELECTRIC SUPPLY Supply, install, testing and commissioning of CPRI approved type of suitable size weather / vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 65x65x6mm (ISA 6565) iron angles frame of height 30cm from PCC bedding, factory assembled compartmetalized construction, free standing type including 3 phase and neutral 200amps current carrying capacity aluminium bus bar with epoxy insulated coating with colour code and insulated support, cable galleries inter connected bus bar connection/linkage complete and conforming to IS 8623 and IP 2147 complete including making connection of cables of incoming and outgoing with thimble/lugs including the accessories and mounting the panel on ground/floor with PCC (1:3:6) bedding upto height of 30cm above ground level and 30cm in foundation complete all as specified and as directed (At existing Sub Stn)

Supply and fix perforated cable tray, made of 2.0mm Galvanized iron sheet, duly bended to required shape by sheet bending machine, including cover, made of 1.2mm thick Plain Galvanized iron sheet duly screwed with the cable tray and duly fixed on the wall/ceilings including suitable Galvanized iron brackets or hanging from the ceiling with suitable suspender as required at site all as specified and as directed by the Engineer -in Charge for the following sizes a) Tray size 75x100x2mm with cover of size 15x105x1.2mm

Supply, installing, testing and commissioning of CPRI approved LT distribution panel outdoor type of suitable size weather/vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 65x65x6mm (ISA6565) iron angles frame of height 30 cm from PCC bedding, factory assembled compartmentalized construction, free standing type, including 3 phase and neutral 200 amps current carrying capacity aluminium bus bar with epoxy insulated coating with colour code and insulated support, cable galleries inter connecting bus bar connection/linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete, including making connection of cables of incoming and outgoing with thimble/lugs, including the accessories as below complete and mounting the panel on ground/floor with PCC(1:3:6) bedding up to a height of 30 cm above ground level and 30 cm in foundation complete all as specified and as directed by Engr-in-Charge.

Taking down pole PCC pole of any height including disconnecting all electrical connection and removing from site all as specified and as directed.

LIGHTNING CONDUCTOR Supply and Fix DMC/FRP insulators of suitable size to separate the earth strips from the channel/angle iron, duly screwed on the iron clamp including flat iron clamp welded on channel/angle and making holes in the earth strips by drilling and fixing the earth strip rigidly with the insulators with GI bolts, nuts, washers etc complete all as specified and as directed.

SPECIAL ITEM (RO PLANT) Design, fabricate, install, test and commissioning of Water treatment plant with reverse osmosis technology suitable to remove all dissolved undesirable minerals/ impurities and to produce soft water with suitable membrane capable to remove all dissolved impurities 01 micron for a capacity of 2000 ltrs per hour all as directed. Source of water- Bore Well/river/reservoir Note: Annual Maintenance Contract with the Manufacturer has to be submitted for 2 years period from the date of completion is deemed to be included in the quoted rate.

Design Basis Reverse Osmosis system Feed flow rate : 2860LPH Permeate flow rate : 2000 LPH System Recovery : 70% Operation : Semi-Automatic Limiting Conditions for RO Feed Water Temperature : Max. 40°C Turbidity : <5 NTU COD : NIL BOD : NIL Iron : < 0.3 ppm Fluoride : < 1 ppm SDI : <3 Free Chlorine : Nil Oil & Grease : Nil Treated water Quality at the Outlet of RO System require 1 PH, 5 – 7.5 2 TDS less then 10 ppm (mg/l) 3 Total Hardness <50 ppm

Specifications:- 1. Filter Feed Pump Type : Centrifugal Mono-block Quantity : 1No. (1W) Capacity : 2.86 m3/hr @ 25 mwc. MOC : CI. 2. Sand Media Filter Quantity : 1 No. Capacity : 2.86 m3/hr. MOC of Vessel : Polyglass Size : 16 X 25 Type of valve : ManualMultiport Valve Media : Sand + Support bed" "3. Activated Carbon Filter Quantity : 1 No. Capacity : 2.86 m3/hr. MOC of Vessel : Polyglass Size : 16 X 25 Type of valve : ManualMultiport Valve Media : Activated carbon + Support bed

4. Antiscalant Dosing System Dosing Pump Quantity : 1 No. Type : Electro-magnetic. Capacity : 0-6 LPH. Discharge Pressure : 2.5 kg/cm2. Dosing Tank 1 Nos. Capacity : 50 lit. Material of Construction : HDPE." 5. Micron Cartridge Filter (MCF) Quantity : 1 No. Capacity : 2.86 m3/hr. MOC of Housing : ABS MOC of Cartridge : PP. Filter Rating : 5 micron. 7. High Pressure Pump Quantity : 1 No. Type of pump : Vertical Multistage Capacity : 3.14 m3/hr Maximum Discharge Pressure : 14.0 kg/cm2. Material of Construction : SS 304.

8. Reverse Osmosis System Quantity : 1 No. Permeate capacity : 2000 LPH Membrane Type : Spiral wound Membrane Specification : TFC-polyamide No. of Membranes : 8 No. No. of Membrane Housing : 3 No. Piping MOC : UPVC Skid MOC : MSEP Electrical control panel : 1 no. 9. Online UV system Quantity : 1 No. Type : Online Capacity : 2000 LPH 10. ICPW Low & High Pressure line : UPVC. Quantity : 1 Lot 11. Control Panel Quantity : 1 No Cabling : 1 Lot. 12. Instruments Pressure gauges : 1 Lot. Pressure switches : 2 Nos. Conductivity meter : 1 Nos. ( built in panel ) Flow indicators : 1 Lot Level switch : 1 Lot

Saiansh Associates

M/S VIKASHA CONSTRUCTIONS

M/s R.L.PAREEK