Shifting of UPS from corridor to UPS shed outside CL 101B

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 4 sq. mm

3 x 6 sq. mm

3 x 10 sq.mm.

2 x 16 sq.mm.

Supply and fixing of 32 x 20 mm DLP mini- trunking white-system with independent cover etc. as required complete.

Supply and fixing of following accessories suitable for 32 mm x 20 mm size plastic trunking white system.

End cap

internal / external angle

changeable flat angle

flat junction

Supply and fixing of 105 x 50 mm DLP trunking white-system but without cover and partion etc. as required complete.

Supply and fixing of following accessories suitable for 105 mm x 50 mm size plastic trunking white system.

85 mm flexible cover

End cap

Internal angles- adjustable from 80°-100°

external angles- adjustable from 60°-120°

flat angles

Joints for 85mm width cover

base joints

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 +12), Double door

Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 5 A to 32 A

Double pole 5 A to 32 A

Single Pole (40A-63A)

Double Pole (40A-63A)

Triple pole (40A-63A)

Four Pole (40A-63A)

S & F metal enclosure suitable for DP/TPN MCB / DP ELCB on surface or recessed etc as reqd.

Supplying and fixing connecting and commissioning following rating, three pole, 35kA MCCB with microprocessor based LS-I release in the existing DB/ Box as required complete.

S&F connecting and commissioning indipendent mounting of MCCB enclosure suitable for MCCB's upto 250A in surface/recess I/c cutting the wall and making good the same in case of recessed (Cat No CS-CNM0100021 C & S or approved equivalent make) as reqd.

Chemical Earthing with GI earth electrode 50mm dia x 3 mtr length including earth enhancing compound (Jam Fill quality product) and PIT cover for earthing pit etc as reqd.

Supply and fixing of following LED light fixture with efficiency >100 lumen/ watt, P.F. >0.95, THD<10%, Electronic driver, LED lamp, reflector, diffusser, MS body/housing holder etc. complete with all fixing accessories and lamp as required complete.

1 X 20W Box type LED tube with fitting

Supply, Installation testing and commissioning of following seep, copper wound, 900 RPM, 220 volt AC, 50 Hz exhaust fan in the existing opening etc as required complete.

375 mm / 15" sweep

Supplying and fixing exhaust fan shutter for following sizes exhaust fan on rag bolts as reqd complete.

for 375 mm / 15" sweep

Supplying, installation of Clip-on frame with finishing plate for 85mm cover for DLP plastic trunking 105mm x 50mm etc. as reqd.

6 module

Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

200 mm X 250 mm X 60 mm deep

Dismantling concealed & damaged DB/TPN Switches/starter/ loose wire boxes along with all accessories and depositing the same in the sectional store repairing the damages as reqd complete.

S & F following size of steel flexible pipe alongwith the accessories on surface etc as required

Lifting removing cable of following size from trench/clamps, making roll & depositing the same in store I/c cartage.

above to 95 upto 185 Sq.mm.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 95 sq. mm (45mm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 95 sq. mm

Siddhartha Constructions