PROVN OF LT CABLE PERIPHERY LIGHT, GEYSERS, CURTAIN RODS, KITCHEN PLATE RACK, PARKING SHED IN ME OFFICE, PATH PAVED AT 18 FAD UCHIBASSI UNDER GE S PATHANKOT

Amount

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,foundation filling of poles or stays and for rerouting of cables.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as specified.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in any type of soil

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specifed and punned thickness shall be measured and paid.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available, laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Providing cement concrete type C2, 1:3:6 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete

Plain cement concrete 100mm thick 1:4:8 type E-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, sub base and mass concrete all as specified

M&L 100 mm thick Cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimeter in field using 400 kg of cement per cubic meter ,laid in alternate bays, finished even and fair without using extra cement.

Plain cement concrete 75mm thick 1:4:8 type E-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, sub base and mass concrete all as specified

M&L for Machine pressed precast concrete with grey cement and pigments interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade

S&F stainless steel plate rack of size 750x600x250mm with stainless steel sheet complete all as specified and directed.

M&L for provn of curtain rod MS tube powder coated of 20mm dia of length 1.20 m to 2.20 m each complete including 02 Nos Finials, 03 Nos brackets, 06 Nos screws & fishers, complete all as specified and directed.

S&F steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ ridges to wall, fixed with self tapping screws as specified (AS-3566 class-iii) complete . Sheet colour approved by Engineer- in -Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer

Supply and fix water heater storage vertical type, SS tank, polycarbonate body electrical operated, capacity 25 litres.BEE 5 star rated duly fixed on wall through proper anchoring, grouting with the help of suitable nuts and bolts, and making good all the disturbed surface all as specifed and directed by the Engr In charge.

Supply and fixing sheet metal enclosure single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 4.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25 mm size ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 2.5 sqmm single core PVC insulated unsheathed copper earth continuity conductor all as specified and as directed. (NOTE : Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.) including making good disturbed surface all as specified and directed.

M&L for GI tubing medium grade of 15 mm dia complete all as specified and directed.

Cutting existing steel tubing for alteration including screwing in position for branch connecting size 15/20/25mm bore, complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm suitable for hot and cold water, complete all as specified and directed.

S&F brass angle valve, cromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm dia, complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of size 15 mm dia, complete all as specified and directed.

Supply and laying to wall or poles or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium multistranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 25 sq. mm nominal cross section 3.5 core in service connections all as required and directed(Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

All as per srl item No 27 above but cable of size 35 Sqmm 3.5 core.

S&F in replacement iron clad, with double door 4 way IP-54, 1K-09 protection, cement sprill prptector sutable for MCCB as incommmer AC 415 Volts three pole with thermal release adjustable type (80% to 100%) and MCB as outgoing complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 ple 415 Volts 100 Amps rating with rupturing cap 25 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at sit or directed. ( Outgoing MCB will be measured speparately)

Supply and fixing GI tubing light grade ISI marked with requisite fittings laid in trenches or crossing roads/ paths/ culverts/ along poles/walls complete all as specified and directed for 50 mm dia size.

Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings, complete all as specified and directed.

M&L for testing & commissioning of cable end termination in door/out door, heat shrinkable type suitable for XLPE/ PVC cables of size 25 Sqmm to 50 sqmm 3½ or 4 core with working voltage 1100 volts make: Denson/ M Seal/Raychem.

Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 95 Sq mm 3.5 core. Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Schedule

All as per item No 33 above but of calble size 16 x 04 core complete all as specifid and directed.

M&L for GI pipe light grade 40 mm dia for cable protection on road crossings /plinth protection with fixed to the pole wall etc. suitable fittings for cable protection .

Supply and fixing onload change over with sheet metal enclousers of 63A 4pole complete all as specified and directed.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

M/S SATPAL AND BROTHERS

P S BUILDERS

kailu construction co

GEE EMM ASSOCIATES

Harbhajan electric co

Standard engineers