Renovation of Electrical Installation in Administrative Block and Guest House at MAREC, Salooni under CSKHPKV, Palampur.

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C. (Wires of Havells/KEI/Finolex/ Plaza/Polycab and accessories of Anchor Penta make)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x6.0 Sq. mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x16 Sq. mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. ( including switch & bakelite sheet etc.) Group C. (Wires of Havells/KEI/Finolex/ Plaza/Polycab and accessories of Anchor Penta make)

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

5x1.5 Sq. mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

3x4.0 Sq. mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

5x4.0 Sq. mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

3x10 Sq.mm. (Havells/KEI/Finolex/ Plaza/Polycab make)

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm. dia (D-plast/ Anchor/ Finolex make)

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-

2 modules (78mmx78mmx50mm) (Anchor Penta ISI marked)

4 modules(140mmx78mmx50mm) (Anchor Penta ISI marked)

6 modules(205mmx78mmx50mm) (Anchor Penta ISI marked)

8 modules (120mmx135mmx60mm) (Anchor Penta ISI marked)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. (Anchor Penta make)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. (Anchor Penta make)

Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required. (Anchor make)

Supplying and fixing bakelite batten/angle holder including connections etc. as required:- (Anchor make)

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:- (Anchor make)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A. (Havells/Lauritz Knudsen make)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A. (Havells/Lauritz Knudsen make)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Triple pole & Neutral. Cat-A. (Havells/Lauritz Knudsen make)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A. (Havells/Lauritz Knudsen make)

Supplying and fixing following rating, double pole (single phase & neutral) 240/415 volts, 2-way centre off changeover switch in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. (Havells/Lauritz Knudsen make)

Supplying and fixing following rating, four pole (Three phase & neutral) 415 volts, 2-way centre off changeover switch in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. (Havells/Lauritz Knudsen make)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-8 way (Havells/Lauritz Knudsen make)

Double door-12 way (Havells/Lauritz Knudsen make)

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-8 way (8+24),horizontal type (Havells/Lauritz Knudsen make)

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 300 mm sweep (Havells/Bajaj/crompton make)

Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 4.47 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- 4 Meter long having nominal bore dia. 65 mm planting depth 80 cm with pit depth 95 cm.

Providing and fixing ultra slim round profile LED tube lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack led tube complete with all accessories, connections, testing and commissioning etc. as required. 20 watt-LED (Havells/Orient/crompton make)

Supplying and Fixing of Decorative wall light fixture made up of Polycarbonate, Suitable for 9W LED lamp B22 base with lamp including making connections, testing etc. as required. (Havells/Orient/crompton make)

Providing and fixing Decorative ultra slim aluminium square profile LED lighting fixture with high lumen output, environmental friendly, energy efficient complete with all accessories, connections, testing and commissioning etc. as required.10 watt-LED (Havells/Orient/crompton make)

Providing and fixing LED Bulb 9/10 Watts. as required. (Havells/Orient/crompton make)

Supplying and fixing twin core PVC insulated weather proof aluminium conductor cable with GI bearer wire 8SWG as required complete in all respect. 2 Core 6 sq mm (ISI marked)

Providing and fixing die cast metal body metal body LED outdoor Street Lights with heat sink along with class leading IP, IK & Surge protections for long lasting performance along with Street light bracket complete with all accessories, connections, testing and commissioning etc. as required. 50W LED 6K (Havells/Orient/crompton make)

DEEPALI ENTERPRISES AND GOVT CONT. (BID ID -593325)