Rate contract for providing 5No RTP 6 and 9 Mtr height 3 legged in different locations in BA Gwalior

Amount

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (a) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for : (a) Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

6 mm cement plaster of mix : (a) 1:3 (1 cement: 3 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (a)Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Finishing walls with Acrylic Smooth exterior paint of required shade : (a) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Providing & Fixing GI pipe of required diameter. ( B - Class, Medium Wt.) Swastik, Jindal or equavalant make as approved by engineer in charge including cutting, hoisting, lifting up to G. floor upto Top floor level, fixing in position and applying a priming coat of approved steel primer all complete.

GI pipe 100mm dia.

GI pipe 80 / 75mm dia.

Providing and fixing MS plate , gusset plate jointed to angle iron / GI pipe and steel work in builtup and welded section .for stay including cutting, hoisting, provision of required size holes, fixing in position and applying a priming coat of approved quality steel primer all complete.up to top floor.

Providing and fixing bracket made of two nos.M.S..flate of size 40 mm x 5 mm.and placed back to back with provision of required size holes, as per direction of engineer in charge including cost of nut & bolts and bending & making holes..all complete.up to top floor. (a) 450 mm long bracket

Drilling hole in terrace i/c fixing coach screws( hold fastener) of size 100 to 150 mm long. as per direction of engineer in charge.all complete.up to top floor.

HINDPATH CONSTRUCTION (BID ID -760731)