Repair to 5000 GPH x 350 meter head HC pump motor set installed at pumping station Jib stage-1st (New)

Amount

Repair to 5000 GPH x 350 meter head pump motor set installed at pumping station Jib stage-1st (New) by way of disconnecting of all electrical connections, decoupling of pump from motor, carrying pump-motor set from pumping station to road side by way of head load and then to work shop by mechanical transportation. Job charges includes repair to shaft by way of remetalling, turning, finishing to the exact bearing size. Providing, fabrication and fitting of new impeller 4 numbers, fabrication /fitting of neck rings 11 nos. diffusers 3nos., diffuser bushes-4 nos., shaft protection sleeve 2nos., gland plate-2nos. with check nut 2 nos. Providing and fitting of new bearings N306-2nos. Repair to impellers-6nos. by brazing and finishing. Providing and fitting of new thrust plate. Repair to 60 HP motor by remetalling the shaft and turning / finishing to the original bearing size. Replacement of bearing 6313 and 6314 one no. each and fabrication and fitting of sleeves. Carriage of pump and motor set back to pumping station by using manual labour tools and tackles and mechanical transport. Coupling pump motor set and making proper alignment and testing the pump set on load at site. Providing and fitting of nuts and bolts and leather flanges at delivery and suction side. Replacement of damaged nuts, bolts and rubber bushes. Job includes the cost of material / labour charges, shifting of tools and tackles and rebate on old parts.

HITECH MECHNICALS

KHALSA ENGG. WORKS