Contruction of Cremation Shed at Neikuppai BG in Neikuppai Panchayat.

Amount

Drilling of 230mm dia with Reinforced Cement concrete 1 : 11/2 : 3 mix using 20mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick.,

Earth work excavation in hard stiff clayee soil and all classes of soil and depositing on bank eith initial lead and lift as per SS 20B

Sand filling with good river sand including cost and conveyance of materials to site including watering and compacting etc., complete.

Cement concrete 1:4:8 mix using 40mm HBG Metal including cost and conveyance of all materials and all labour chages etc., complete

Cement concrete 1:2:4 mix using 20mm HBG Metal including cost and conveyance of all materials and all labour chages etc., complete

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc,

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials and all labour chages etc., complete

Below Level

Above Level

Cement concrete 1:3:6 mix using 20mm HBG Metal including cost and conveyance of all materials and all labour chages etc., complete

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Below Level

Coloumn

Roof Lintel

Sunshade

Brick work with cement mortar 1:5 mix using II class bricks of size 9"x41/2"x3" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete.

Below Level

Above Level

Plastering with Cement Morter 1:3 mix 10 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and th.en sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc.,complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete

Casting and fixing of RCC Precast slab of following thick 1:2:4 using 20mm hbg jelly50mm thick RCC Precast slab

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

RAVIKUMAR B (BID ID -1562266)