Improvement of Water Supply Scheme Kararwala Block Rampura District Bathinda (Under 2a (i))

Removing doors and windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. A) Doors of area 3 sqm and below. (Item No. 8.26)

B) window of area 3 sqm and below.

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 & 100mm sand filling. (Item No. 14.10)

white washing 3 cote. (Item No. 16.3)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade. (Item No. 16.14)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (Item No. 16.18 (a))

Hollock wood, doors, shutter, windows, shutter including hinges, screws, chocks, cheats, stops, cords etc. complete fixed in position. ii) 35 mm thick (Item No. 17.10 (iii) a)

Chowkats of commercial hard wood such as golden champ confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc. complete fixed in position. B) Single Rebate (60mm x 100mm) (Item No. 17.15 (ii) B)

Providing & fixing C.I / D.I. Flanged end, stem of SS ( AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete ( with the approval of Engineer in-Charge). A) Class PN-1 as per ISI a) 80mm i/d (Item No. 28.27)

c) 150mm i/d

d) 200mm i/d

Construction of masonry sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. a) 0.90 x 0.90 mtr. (Item No. 28.66)

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method.Including excavation , stringing and jointing of pipe upto 160mm complete. (Item No. 28.71).

Supplying fixing and testing at site Automatic electrinic type water level indication system with gun metal float sensor and electrical vable suitable for three phase pump submersible/ monoblock to be fixed in existing panel for OHSRs complete in all respects. (Item No. 28.90)

Providing & Installing Testing & Commissioning of one No. Electrically driven Submersible Pumping set (of Reputed make) capable of delivering 785 LPM against a head of 77mtr along-with electric panel board consisting of electric appliances such as automatic STAR Delta Push Button Starter, Main Switch. V.M.A.M, ELCB, Shunt Capacitor, Single Phase Preventer, Indicating Lamps, Kit-Kat etc. including G.I. Column pipe of suitable size -40 mtr 100mm i/d(in 3 mtr length each with flanged screwed and welded on both sides) rubber gaskets nuts and bolts submersible cable 8MM^2 (reputed make) complete in all respects as per specifications. Submersible pump set (20.00 BHP) making discharge 785 LPM with head 77 mtr. (Item No.NS)

Control Panel. (Item No.NS)

Providing & fixing electric fan 48" and regulator etc. complete. (Item No.NS)

Providing & fixing CFL Tube 23W. (Item No.NS)

Providing, Stringing out P.V.C. Pipe 6 kg cm2 pressure as per ISI-4985 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including cost of specials complete as per specifications including excavation for pipe line in trenches and pits upto required depth and cover on pipe minimum 1 mtr. with earth etc. complete in all respects. b) 90mm o/d (Item No.NS)

Provision for Railing, Aluminum ladder (LS). (Item No.NS)

Repair of Expension Joint. C) 150mm i/d (Item No.NS)

d) 200mm i/d

Provision for repair of leakage of dome (L.S) (Item No.NS)

Dismantling brick of flanged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting. (Item No.NS)

Water Connection on existing pipe line (Item No.NS)

Water Connection on new pipe line (Item No.NS)

Repair of existing Water Connection (Item No.NS)

Provision for Painting/intallation of sign board (Item No.NS)

Providing , installing , testing & commissioning one No. Electronically actuated , Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Litres of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 Kg /sqcm and suction lift not less than 1.5m , as per DWSS standard specifications. (Item No.NS)

Credit for old Machinery for 1 No. (Item No.NS)

Credit for old 2 No. Sluice Valve (Item No.NS)