CA NO. GE(P)AF/GUR-09/2022-23 REPAIR AND MAINTENANCE OF STREET LIGHT, PERIMETER SECURITY LIGHT , HIGH MAST LIGHT, POLE PAINTING, JUNCTION BOXES, TIMER PANEL, CABLES ,GATE LIGHT AND GARDEN LIGHT AT AF STATION PALAM UNDER GE (P) AF GURGAON

Amount

Taking down unserviceable street/Security light fittings of any capacity, any height , any type , make and position (such as CFL light fitting, /LED fitting/flood light fitting/garden light/gate and from pole etc) for repairing the same after complete dismantling, checking replacement of unserviceable parts and components as required and make the light fittings operational to give rated illumination incl cleaning the acrylic cover and refixing the same with necessary electrical connection with fresh two single core 2.5 Sqmm PVC sheathed multistranded aluminium conductor of required length (not more that 2.5 mtr long) complete all as specified and directed. (The U/S street light fittings should be removed from site and to be stored at one place for repairing purpose. The Nos of U/S light fittings should be removed from site and to be stored at one place for repairing purpose. The Nos of U/S light fittings to be removed, the place of repairing and refixing schedule will be as per direction and specified by Engr-in-Charge.) Note :- (Spare parts/components shall be measured and paid separately) under respective item Sch 'A').

S&F in replacement of driver for LED light fitting of capacity 60W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 60W to 90W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 120W to 150W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 210W to 300W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of driver for LED light fitting of capacity 40 to 45W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of panel for LED light fitting of capacity 60W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells / Bajaj/PHILIPS/Crpmpton/ Hallonix

S&F in replacement of panel for LED light fitting of capacity 60W to 90W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Make : Havells / Bajaj/PHILIPS/Crpmpton/ Hallonix

S&F in replacement of Panel for LED light fitting of capacity 120W to 150W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

S&F in replacement of panel for LED light fitting of capacity 210W to 300W for any make fitting as per matching to existing type including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells/Bajaj/PHILIPS

Supply and fixing LED street light fitting of capacity 60 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No ENDURAOMNIPLUSSL60WLED757SASYTOPC OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix as approved.

Supply and fixing LED street light fitting of capacity 90 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No ENDURAOMNIPLUSSL90WLED757SASYTOPC OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix as approved.

Supply and fixing 150 watt energy , saving environmental friendly, long life exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces, including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No JETAIRISFLFL150WLED757SARNBLTG OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix

Supply and fix replacement of Highly efficient high power LED flood light without lens , pressure die cast aluminium housing, reflector and enclosed with toughened glass Capacity 215 Watt . IP 66, complete all as specified and as directed by Engr-in-charge. Make : Havells Cat No JETAIRISFLFL200WLED757SARNBLTG OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix

Supply and fixing replacement of LED flood light of capacity 300 watts ,cool white complete with drivers and all accessories and making all necessary connection including taking out of old unserviceable one, complete all as specified and directed by Engineer-in-Charge.Make : Havells Cat No JETAIRISFLFL300WLED757SARNBLTG OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix

Supply and fixing 9 watts LED bollards square shape, integral decorative with opal acrylic with IP 65 protection light fitting including necessary connections and taking out of old unserviceable one., complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No JETAIRISMAXFL300WLED757PNBLTG OR equivallent of Bajaj/PHILIPS/Crompton/Hallonix

Supply and fixing LED post light 50 watt made in die cast aluminium body and with clear toughened glass diffuser and IP -65 Protection complete including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No RUBYMAXIPT50WLED830PSYMTOPC OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix as approved.

Supply and fixing LED post top light 40 watt made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP -65 Protection including necessary connection complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No RUBYMAXIPT40WLED830PSYMTOPC OR equivallent of Bajaj/PHILIPS/Crpmpton/Hallonix as approved.

S&F time switch type Alpharex3 D 21 astro, complete all as specified and directed by Engr-in-Charge. Make : Legrand Cat Part No.412654 or equivalent in Siemens/L&T

Supply and fixing in replacement 40 amps TP power contactor, complete all as specified and directed by Engr-in-Charge. Make - Legrand Cat Part No-412549 or equivalent in Siemens/L&T)

Supply and fixing in replacement 63 amps TPN MCB, complete all as specified and directed by Engr-in-Charge. Make - Legrand/Siemens/Schneider

Supply and fixing in replacement 40 amps TPN MCB, complete all as specified and directed by Engr-in-Charge. Make - Legrand/Siemens/Schneider

Supply and fixing MCB SP 10 to 32 amps, complete all as specified and directed by Engr-in-Charge. Make : Legrand/Siemens/schiender

S&F 2.5 Sqmm three (03) core stranded PVC insulated copper conductor FR cable for connection of fittings, complete all as specified and directed by Engr-in-Charge. Make: Plaza/Havells

Supply and fixing non transparent looping SMC kiosks pole box 3 phase of size 310×210×120 mm made out of engineering plastic one piece moulding siemens gray colour with hold fast including 4 Nos aluminium strips 60 amp of requird size fixed on unbrakable insulator and one no single pole MCB 1 to 3 amp 'C' curve including taking out of old unserviceable one, complete all as specified.

Supply and fixing in replacement GI bracket 32 mm dia 1.5 Mtr long light grade made to shape including taking down old and u/s existing fitting complete.

Supply and fixing in replacement GI bracket 40 mm dia 1.5 Mtr long light grade made to shape including taking down old and u/s existing fitting complete.

Supply and fixing in replacement MS clamp any shape and size along with nuts, bolts and washers etc of sizes as required.

Supply and fixing street light bracket made out of 40 mm light grade GI tubing minimum 1.5 Mtr long with with suitable adapter to suit the opening of street light on one end alongwith integrated fabricated adapter round cup type with 02 Nos studs on outer side to fix the braket on top of existing steel tubular pole two way, with necessary MS clamps with one coat of red oxide and two coats of alluminium paint upon fabricated adapter including nut, bolts, washers complete all as specified and directed by Engr-in-Charge.

Supply and fixing street light bracket made out of 40 mm light grade GI tubing minimum 1.5 Mtr long with with suitable adapter to suit the opening of street light on one end alongwith integrated fabricated adapter round cup type with 04Nos studs on outer side to fix the braket on top of existing steel tubular pole four way, with necessary MS clamps with one coat of red oxide and two coats of alluminium paint upon fabricated adapter including nut, bolts, washers complete all as specified and directed by Engr-in-Charge.

Taking down existing old street light panel /feeder box comprising of MCCB & switch fuse unit of any capacity and size including bus bar, ammeters, voltmeters etc after disconnecting all cable connection and removing from site complete all as directed.

S&F street light panel /feeder box made out of MS/CRCA sheet 3.15mm thick with MS angle iron frame of size 40x40x6mm out door type front door opening with locking arrangement slinting roof and size of panel/feeder pillar box is 0.6mx0.45 and 0.35 m with out legs including necessary pcc cutting and fixing with pcc 1:3:6 of size 0.3mx0.3mx0.2m for 04 nos legs including necessary insulators and 04 nos copper bus bar of size 30mmx5mm capacity, provn of inlet and outlet cables with glands and earth connecting lead etc complete and connection of all incoming and out going cable using aluminium terminal sockets/lugs duly crimpled and necessary two coats of paints with approved colour and grade of first quality synthetic enameled paint over a coat of red oxide primer including necessary preparation of surfaces all specified and testing complete including the following :-

(i) S&F MCCB 4 pole 415 volts 125 amps 16 KA - 01 No. Make Legrand /Siemens/schiender (ii)S&Fmodular indicator lamp LED type -1 set (R,Y,B). (iii)S&F time switch type Alpharex3 D -21 astro Legrand CAT No 412654 =01 No (iv)Supply and fixing 40 amps TP power contactor Make -Legrand Cat No-412549 =01 No (v)Supply and fixing 32 amps TPN MCB Make - Legrand/Siemens/schiender =01 No (vi)Supply and fixing 6-32 amps sp MCB Make - Legrand/Siemens/schiender =06 Nos (vii)Supply and fixing single phase preventer Make -L&T=01 No

S&F out door type cubical panel board suitable for 3 phase, 4 wire, 415V, 50 Hz and tested at CPRI at 415 volts factory fabricated in an approved factory with CRCA sheet not less than 3.15mm thick having modern fabrication process powder coating in approved shade having thickness not less than 100 microns provided with suitable gasket to make it dust and vermin proof and general constructions conforming to IS : 8623/93. The LT Panel shall be front and back openable and having inner and outer shells. The inner shells duly compartmentalized for each control gears. The panel should have suitable size of Copper Bus -bar three phase 4 wire system having current carrying capacity not less than 1-5 times the rated current carrying capacity of the incomer ACB/MCCB.The panel should have the following incoming and outgoing controls duly fixed with the panel by means of suitable link plates complete all as specified and as directed by Engineer-in-Charge. approved manufacturer and to accommodate the following incoming and outgoing controls and suitable size:- (Make: Conelec Systems/Tricolite/Mc Layer/Indo Asian/ Advance / Universal Switch gear / Power system and controls)

INCOMING (i) MCCB 200 A 4 pole -1 No (Adjustable thermal and fixed magnet setting) (ii) Digital Multi functional meter VAFPP (voltage, current,frequency, power factor- 1 No (iii) Phase indicator lamp (LED type) 1 ste (set of three) OUT GOING (i) MCCB 100A 3 pole - 01 Nos (Fixing thermal and fixed magnet setting) (ii) MCCB 63 A 3 pole - 03 Nos (Fixing thermal and fixed magnet setting)

Lowering of high mast light assembly from 16 mtr hight mast and refixing the complete assembly on 16 mtr top after repairing of light any type/wattage incl complete dismantling, checking replacement of unserviceable parts and components as required and make the light fittings operational to give rated illumination incl cleaning the acrylic/glass cover and refixing the same after repair/replacement of spare components complete with necessary electrical connection with two single core 2.5 Sqmm PVC sheathed multistranded copper conductor of required length complete all as specified and as directed. Note :- 1. Spare parts/components shall be measured and paid separately under respective item of sch 'A' . Note:- 2. The greasing of pully, roller, bearing and gear including refixing rope clamp, adjustment of lock, lever etc deemed to be included in the item rate.

Supply and fixing trailing cable 4 Sqmm, 5 core copper conductor EPR insulated PCP sheathed cable having current carrying capacity 30 Amp complete all as directed by Engr-in-Charge.

Supply and fixing trailing cable connector and terminal box suitable for 16 Mtr high mast. Make and model as per existing complete all as directed by Engr-in-Charge.

Supply and fix high mast 3 phase , 440 volt integeral motor remote control switch of existing make with one No isolator 4 pole, 63 Amp complete all as directed by Engr-in-Charge.

Repair/maintenance of timer switch assembly of any type and make after dismantling the same from pole, detecting the fault, rectifying the same, testing and refixing in the existing position complete all as directed by Engr-in-Charge.

M & L for removing the motor of capacity 2 hp to 5 hp from high mast light, rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete with “E” class varnish, including replacement of gun metal bush and side rubber ring and re-fixing in original position complete including testing all as directed

Supply & fix in repairs round, 3 core cable, PVC insulated and fire retardant PVC sheathed, alluminium conductor of size 4 Sqmm, for electric connection from feeder / looping box / street light over head line to street light fitting. Make : Havells/Finolex/Polycab

M&L in replacement of Steel rope multistranded, suitable for high mast not less than 10mm thickness and 45 mtr in length complete all as specified

M&L in replacement of Chain system suitable for running in pinion at site of individual high mast pole all as specified

M&L in replacement of Service cable PVC insulated sheathed with multistranded aluminium conductor 6.00 Sqmm three core complete all as specified and as directed

Supply and fixing street light Lexic Power Timer contactor, 04 pole, 63 Amps complete all as directed by Engr-in-Charge.

Supply and fixing street light Lexic Timer Auxilary change over switch 06 Amp complete all as directed by Engr-in-Charge.

Supply, fix, commissioning and testing of automatic operation of street light switch having lighting control through astronomical calculation of sun rise/sun set time by setting data, time and degree of longitude , latitude with out of separate light sensor, of capacity 06 KW with MCB rating 40 Amp SPN enclosed in sheet metal enclosed made out of 14 SWG CRCA Sheet duly painted and prewired of suitable size of copper single core FRLS sheathed cable including fixing on pole with suitable clamp and nut and bolts complete. Make : Havell's cat No IHXSS0106A or other equivallent L&T, ABB, Legrand, HPL

Supply, fix, commissioning and testing of automatic operation of street light switch having lighting control through astronomical calculation of sun rise/sun set time by setting data, time and degree of longitude , latitude with out of separate light sensor, of capacity 12 KW with MCB rating 63 Amp TPN enclosed in sheet metal enclosed made out of 14 SWG CRCA Sheet duly painted and prewired of suitable size of copper single core FRLS sheathed cable including fixing on angle frame and gouting in PCC foundation complete or fixing on pole with suitable clamp and nut and bolts complete. Make : Havell's cat No IHXTS0912A or other equivallent L&T, ABB, Legrand, HPL

Supply and fixing SPN, DBs for lexic MCB complete with SPN MCB 63 Amp, 10 KA, 240 V fixing on pole with necessary clamp and nut, bolts and as directed by Engr-in-Charge. Make : Havells, L&T, Legrand, ABB

Scrapping , cleaning and preparation of old surfaces of steel tubular pole (9 mtr long) of any size and type steel fitting complete and M&L for painting with one coat for aluminium paint after preparation of the steel surfaces, writing the pole No in white colour and blue base with standard font size of number complete and then applied strap with two coats black and blue paint in strap alternatevely all round the poles from the bottom of the pole for indication of the poles. . Height of the strap shall be 30 cm and number of strap shall be 05 Nos and as directed by the Engr-in-Charge.

Dismantling of unserviceable concerete/steel tubular pole any size upto 9 mtr long including breaking up PCC and making good disturbed surface and removing materials from site of work complete all as specified and directed.

M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L for PCC 1:2:4, type B-1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed.

Supply and fixing of steel tubular swaged poles swan neck type with two coat of aluminium paint ovar a coat of red oxide zinc chrome prime in externally exposed to view portion and black bituminous painting to intenal surface and portion embeded in concrete incl making five alternative strips 30 cm wide in different colour above ground level or plinth level incl marking of MES pole No in black paint complete with cast iron base plate, final tapper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00 mtr long) and all as specified.

M &L for demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level)

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregates for filling in road cuts/hard standing etc all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and as directed for foundation of stay, laying of cable etc.

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed.

Material and labour Bricks, dry, well brunt bricks laid in trenches for cable protection all as specified.

M&L for sand filling in trenches for cushioning of cable complete all as specified and directed.

Taking up old serviceable/unserviceable UG cable from trench for replacement , repair and re-laying or re-routing of size :- (Earth work shall be measured and paid separately under appropriate items of Sch-'A')

(a) 10 Sqmm 2 Core to 35 Sqmm 04 Core

(b) 50 Sqmm 3.5 Core to 70 Sqmm 3.5 Core

Material and labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area of the following size :-

(a) 10 Sqmm 2 Core

(b) 16 Sqmm 2 Core

(c) 16 Sqmm 4 Core

(d) 25 Sqmm 3.5/4 Core

(f) 50 Sqmm 3.5 Core

(g) 70 Sqmm 3.5 Core

Re-laying/re-routing serviceable cable upto 35 Sqmm 3.5 core as obtained from item No. 61 (a) here-in-before.

Re-laying/re-routing serviceable cable from 50 Sqmm 3.5 core to 150 Sqmm 3.5 Core as obtained from item No. 61 (a) here-in-before.

Re-laying serviceable bricks as obtained from item No 61 (a) & (b) here-in-before.

Boring of holes under road, pavement, hard standing for more than 5 mtr in length by trenchless, technology using ultra sound technique and necessary machine, including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure complete all as directed.

Boring of holes under road, pavement, hard standing, drain etc by conventional method not exceeding 5 mtr in length for laying of cable for protection of pipe etc complete.

M&L for cutting the existing bitumen us road/payment/footpath upto 0.75 mtr in depth, 0.45 mtr in width and getting out excavated material and making good the damaged portion after laying the pipe, returning filling in mass concrete PCC 1:2:4 type B2 upto top of the road all as directed by Engr-in-Charge. Note :-(i) M&L for laying of pipe shall be measured and paid separately.

Material and labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area of the following size :-

(a) 10 Sqmm 2 Core

(b) 16 Sqmm 2 Core

(c) 16 Sqmm 4 Core

Supply and fixing in repair LT UG cable aluminium lugs of following size including disconnection of U/S lugs from panel and making electrical connection complete all as specified and directed by Engr-in-Charge:-

(a) 120 Sqmm

(b) 95 Sqmm

(c) 70 Sqmm

(d) 50 Sqmm

(e) 35 Sqmm

(f) 25 Sqmm

(g) 150 Sqmm

M& L for Indoor/outdoor cable end terminal joints (Resin cast type kits ) any type complete suitable for LT PVC insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 35 to 50 Sqmm complete

All as per item No 71 here-in-before but 4 core 70 to 150 Sqmm size

Labour only for cutting/pruning the overhanging or adjacent branches of trees of any girth LT overhead line including cutting the bamboos and cleaning the jungle below and upto 3.00 metre clear distance from the middle conductor of the line on either side complete and removing rubbishes from site all as directed.

Earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion .

Earthing complete with GI steel earth plate electrode 60cm x 60cmx6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 mtrs below level ground, connected to GI iron or steel earth wire 4mm dia (8 SWG) by means of nuts, volts checks nuts and washers made of GI iron or steel earth wire protected by GI iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC over slab 30cmx30cmx10cm with one lifting handle made of 8mm dia MS bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Part-I and testing after completion.

Notes:- The amount of Rs 118141.00/- against Schedule of Credit on Page No. 117 & 118 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

SM CONSTRUCTION COMPANY

M/s Adhikari construction co.

M/S Ashoka Engineers and contractors

YASHVI ENGINEERS

M/S Anand Enterprises

Deep Contractor

Ridhi engineers and builders