REPAIRS TO WOODEN /MS /ALUMINIUM JOINERY AND OTHER MISC WORKS OF OTM/MD ACCN AT ASIF NAGAR AREA OF AGE B/R-II UNDER GE GOLCONDA

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and as directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and as directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and as directed.

S & F in repairs 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets.'square,rectangular or triangular insection, clean sawn, secured with nails or brads complete all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and as directed.

S & F Window guard bars, plain, let in and fixed independently in wodden frames, L or T section section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified and as directed.

S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as directed.

S & F for factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all as specified and as directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified and as directed.

S & F for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet in 1.60 mm, etc complete all as specified and as directed.

S & F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay,and frame complete with glazing bars,dovetailed or welded, etc complete all as specified and as directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type) complete all as specified and as directed.

S & F MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed complete all as specified and as directed.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for 18 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work for cub board,kitchen cub board and selves and other uses etc complete all as specified and as directed.

S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction complete all as specified and as directed.

S & F factory made solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and as directed.

S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and as directed.

S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F 100 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified and as directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 100 mm etc complete all as specified and as directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and as directed.

S & F for Aluminium wire type I, Gate and shutter, hooks and eyes 150 mm,etc complete all as specified and as directed.

S &F in repair of MS 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and as directed.

S &F in repair MS fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed.

S & F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and as directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete all as specified and as directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, three track etc complete all as specified and as directed.

S&F 5.5 mm thick glass fixed in aluminium door / window / ventilator with aluminium beading complete all as specified and as directed.

M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified and as directed.

S&F aluminium Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and as directed.

S&F 140 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and as directed.

M&L brick work with old size fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M & L half Brick wall with old size fly ash bricks straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cementcomplete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 with WPC on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement complete all as specified and as directed. (NOTE : - WPC will be measured and paid separately)

M&L 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement complete all as specified and as directed.

Preparing newly plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.

Preparing newly plastered surfaces and applying two coats of colour wash on walls complete all as specified and as directed.

Preparing newly plastered surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.

Preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M/S SAI MURALI ENTERPRISES

M/s Bhavani Constructions