Special repair to bldg No P-153 (Toilet Block) in Bharatpur Lines at Mil Stn Dharamshala

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc, complete all as specified and directed by the Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including PVC casing and caping of suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly including sunk sheet steel terminal box made out of 1.6 mm thick MS sheet covered with 3 mm thick plastic laminated sheet ( Make Hylum) concealed in wall or on surface as per site requIrement and making good disturbed surfaces of wall for one light point/bell point/fan point/exhaust fan point etc controlled by one, one way switch, complete all as specified and as directed by the Engr-in-Charge.

All as per serial item No 2.00 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly, complete all as specified and as directed by Engr-in-Charge.

M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type, complete all as specified and directed by the Engr-in-Charge.

M&L for Switch piano flush type single pole one way 15 Amp, complete all as specified and directed by the Engr-in-Charge.

M&L for Switch piano flush button 5 Amps, complete all as specified and directed by the Engr-in-Charge.

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block, complete all specified and as directed by the Engr-in-Charge.

Supply & Fix in replacement of existing unsrviceable Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 08 way (Double door) with 200 amp 240 Volts rated bus bar, complete all as specified and directed by the Engr-in-Charge. Note: (i) Connections of MCB's shall be done with appropriate size of brass/Copper thimble. (ii) The disturbed surface shall be match with existing surface.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral, current carrying capacity 32 Amp complete all as specified and directed by the Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp complete all as specified and directed by the Engr-in-Charge.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by the Engr-in-Charge.

Supply and fixing LED street light fitting 15 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed by the Engr-in-Charge.

M&L for lamp holder, PVC/ polycarbonate type with back plate, complete all as specified and directed by Engr-in-Charge.

Supply and fix LED LAMP 9 W BC 6500 K, complete all as specified and directed by the Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion, complete all as specified and directed by the Engr-in-charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed by the Engr-in-Charge.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed by the Engr-in-Charge.

Excavation in trenches , not exc. 1.5 mtrs wide and not exc. 1.5 mtrs in depth in hard/dense soil and and getting out, complete all as specified and directed by the Engr-in-Charge.

Returing , filling ,including spreading , levelling, watering and well ramming including moundas as in hard/ dense soil in layers not exc 25 cm, complete all as specified and directed by the Engr-in-Charge.

Removing excavated materiel n.exc. 50 Mtrs and depositing where directed at a level n. exc. 1.5 mtrs above the strarting point in soil, complete all as specified and directed by the Engr-in-Charge.

M & L for Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I (2009) laid before and after laying of cable, complete all as specified and directed by the Engr-in-Charge.

M&L for old size sub class 'B' bricks laid in trenches as cable covers, complete all as specified and directed by the Engr-in-Charge.

Supply & laying XLPE insulated heavy duty electric power cables with multistranded aluminium conductor,1100 volts grade of size 10 sqmm 2.0 core, complete all as specified and directed by Engr-in-Charge

Supply & fixing/ laying of GI pipe of size 40mm dia light grade laid in trenches/walls including clamps,screws etc, complete all as specified and directed by Engr-in-Charge

Taking up or down steel tubing and connections cleaning and re-fixing or removal to store of size 25mm dia GI pipe, complete all as specified and directed

Supply and fix Galvanised iron pipe medium grade ISI marked of size 25 mm dia with screwed socket joints together with all fittings such as sockets,bends,elbows,tees,short pieces, connectors, back nuts,diminishing pieces,caps,lugs and union etc. fixed with surface of wall/ roof/on gound/on supports etc, complete all as specified and direcetd by Engr-in-charge.

Supply and fixing in replacement gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 40mm dia, complete all as specified and direcetd by Engr-in-charge.

Supply and fixing in replacement gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 25mm dia, complete all as specified and direcetd by Engr-in-charge.

Supply and fix Rotational moulded polyethylene water storage tanks of capacity 500 ltrs (cylindrical ertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and direcetd by Engr-in-charge.

Supply and fix Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and direcetd by Engr-in-charge.

Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified and direcetd by Engr-in-charge.

25mm thick PCC M-15, nominal mix, type B-1, using 20mm graded mechanically crushed stone aggregate as in floors, finished even and rough to receive floor finishes, complete all as specified and direcetd by Engr-in-charge.

Mat finish (non skid), Premium class I grade, coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6, complete all as specified and direcetd by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and direcetd by Engr-in-charge.

Glazed ceramic coloured tiles, Premium class I grade, of size 450mmx300mmx7mm thick as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick rendering in cement mortar 1:4 on surfaces of walls, complete all as specified and direcetd by Engr-in-charge.

Taking down cement plaster on brick or stone walls including racking out joints, hacking for keys and scrubbing down with water etc, complete all as specified and direcetd by Engr-in-charge.

Rendering 15 mm thick cement plaster in CM 1:4 on stone masonry surfaces or surface other than fair face of brickwork finished even and smooth without using extra cement, with water proofing compound in two layers all as specified. complete all as specified and direcetd by Engr-in-charge. Note-: WPC to be measured and paid seperately.

Supply only liquid water proofing compound, complete all as specified and direcetd by Engr-in-charge.

Two coats of white wash on old plastered surface of walls including preparation of old plastered surfaces by Washing, rubbing down and stopping of distempered and painted surfaces, complete all as specified and direcetd by Engr-in-charge.

Preparation of new plastered surface of walls and applying two coats of cement base paint,over a coat of white wash, complete all as specified and direcetd by Engr-in-charge.

75mm thick PCC Type C2, 1:3:6 (40mm graded aggregate) as in plinth protection, complete all as specified and direcetd by Engr-in-charge.

Taking down chowkats with shutters (without taking off shutters from the frames) of any description not exc. 1.5 Sqm each, complete all as specified and direcetd by Engr-in-charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and direcetd by Engr-in-charge.

PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in back filling of chowkhat, complete all as specified and direcetd by Engr-in-charge.

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent for top rail, lock rail & battom rail on either side & as gap insert for top rail & bottom rail: Panelling of wood grain printed PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on MES SSR Part-II 2010, complete all as specified and direcetd by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but not exc. 4.0 Sqm each, complete all as specified and direcetd by Engr-in-charge.

M&L Second class hard wood (Sal/Hollock) Plain solid straight chowkats and frames wrought, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and direcetd by Engr-in-charge.

Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc. 30mm thick Second class hard wood Kail ( without sash bars), edges framing plain, chamfered or rounded. Fitted with cut and mitred beads for scuring glass, etc as per SSR 2009 part -1 clause No 8.24 (a), complete all as specified and direcetd by Engr-in-charge.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repairs, complete all as specified and direcetd by Engr-in-charge.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and direcetd by Engr-in-charge.

S & F aluminium alloy, anodised,sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy 250 mm long, complete all as specified and direcetd by Engr-in-charge.

S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and direcetd by Engr-in-charge.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and direcetd by Engr-in-charge.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and direcetd by Engr-in-charge.

Two coats of synthentic enamel paint over one coat of pink primer on new wood or wooden based surfaces of any description exc 10cm width or growth including prepration of surfaces, complete all as specified and direcetd by Engr-in-charge.

Vitreous china ware Orissa pattern white squatting pan of size 580x440mm with integral foot rest including PVC (SWR) 'P' trap front or back inlet and connection to pipes (excluding flushing cistern but incl flushing pipe 32mm dia MS chromium plated, complete all as specified and direcetd by Engr-in-charge.

PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and direcetd by Engr-in-charge.

PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and direcetd by Engr-in-charge.

Viterious china bowl urinal flat back, size of 465x355x265 mm white with grating and union for discharge pipe incl providing and fixing plux bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screw fixed in repairs, complete all as specified and direcetd by Engr-in-charge.

S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste coupling , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and direcetd by Engr-in-charge.

Taking up or down steel tubing and connections,including cleaning for refixing or removal to store for 15 mm bore tubing, complete all as specified and directed by Engr-in charge.

S&F for 15mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall, complete all as specified and direcetd by Engr-in-charge.

S&F for 20mm bore GI tubing medium grade with all fitting laid under floors or fixed in wall, complete all as specified and direcetd by Engr-in-charge.

S&F 15mm stop valve, cast coper alloy, screwed shown high pressure with crutch or butterfly handle,fancy type, chromium plated, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and direcetd by Engr-in-charge.

S&F for bib taps, 15mm bore, cast copper alloy, fancy type chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and direcetd by Engr-in-charge.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40 gms), complete all as specified and direcetd by Engr-in-charge.

Aluminum anodised tubular towel rail 20mm dia, D type, 60cm long between flanges, complete all as specified and direcetd by Engr-in-charge.

False ceiling using anodised aluminium or colour coated 'T' & 'L' sections, snap grid frame work of size 605mm x 605mm including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long complete with 4mm gypsum board ISI marked, complete all as specified and direcetd by Engr-in-charge.

M&L for 100mm thick cement concrete type C2 (1:3:6) using 40mm graded aggregate as in sub base, complete all as specified and direcetd by Engr-in-charge.

M&L for chequered cement concrete tiles with grey cement and pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:4, complete all as specified and direcetd by Engr-in-charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and direcetd by Engr-in-charge.

Krithvik Electricals

VIJAY KUMAR LAKHNI